Effect of loading on recovery of internal friction of Al-16 Wt % Ag and Al-16 Wt % Ag-0.28 Wt % Fe alloys
Source abstract
Abstract
The phenomenon of internal-friction recovery of Al-16 wt % Ag and Al-16 wt % Ag - 0.28 wt % Fe alloys is studied after cold-working the samples in uniaxial tension using the free decay method. The wire samples are investigated for internal friction recovery while they were loaded, within the elastic limit, by different loads at different testing temperatures. It is found that by increasing the temporary loading, the rate of recovery decreases. TEM investigations confirmed that the addition of Fe to Al-Ag alloy accelerates the formation and coarsening of Guinier-Preston zones. The results are explained on the basis of dislocation damping adopting the Granato-Lücke model for recovery of internal friction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. D. B. Williams, Metals Trans. 19A (1983) 1745.
2. PH. A. Dubey, B. Schonfeld and G. Kostorz, Acta Metall. mater. 39 (1991) 1161.10.1016/0956-7151(91)90204-E ↗
3. G. Dlubek, G. Wendrock and K. Pawelzyk, Phys. Stat. Sol. (a) 140 (1993) 311.10.1002/pssa.2211400203 ↗
4. A. Malik, B. Schonfeld and G. Kostorz, Z. Metalle. 88 (1997) 625.
5. A. S. Nowick, J. Appl. phys. 25 (1954) 1129.10.1063/1.1721827 ↗
6. J. S. Koehler, “Imperfections in Nearly Perfect Crystals” (J. Wiley, 1952) Ch. 7.
7. A. V. Granato and L Ücke, J. Appl. Phys. 27 (1956) 583.10.1063/1.1722436 ↗
8. R. De. Batist, “Internal Friction Of Structural Defects In Crystalline Solids” (North-Holland Publ. Co., 1972) p. 367.
9. T. Mori, M. Okabe and T. Mura, Acta. Metall. 28 (1980) 319.10.1016/0001-6160(80)90167-4 ↗
10. M. Okabe, T. Mori and T. Mura, Phil. Mag. A 44 (1981) 1.10.1080/01418618108244490 ↗
11. R. Monzen, K. Suzuki, A. Sato and T. Mori, Acta. Metall. 31 (1983) 519.10.1016/0001-6160(83)90040-8 ↗
12. G. Graiss and G. Saad, Phys. Stat. Sol. (a) 92 (1985) 489.10.1002/pssa.2210920218 ↗
13. M. A. Kenawy, G. Graiss, G. Saad and A. Fawzy, ibid. 107 (1988) 71.
14. G. Graiss, G. Saad, L. N. Makar, Solid State Commenication 70 (1988) 375.10.1016/0038-1098(89)90347-5 ↗
15. G. Graiss, G. Saad, L. N. Makar and M. A. Mahmoud, Egypt. J. Sol. 14 (1991) 1.
16. T. Kanadani and A. Umada, Phys. Stat. Sol. (a) 148 (1995) k23.10.1002/pssa.2211480136 ↗
17. Idem., ibid. 151 (1995) 29.10.1016/0294-3506(95)80151-0 ↗
18. G. H. Deaf, S. B. Yossef, M. A. Mahmoud, G. Graiss and M. A. Kenawy, ibid. 158 (1996) 471.10.1002/pssa.2211580215 ↗
19. G. H. Deaf, S. B. Yossef and M. A. Mahmoud, ibid. 168 (1998) 389.10.1002/(SICI)1521-396X(199808)168:2<389::AID-PSSA389>3.0.CO;2-O ↗
20. A. H. Cottrell and Bilby, Proc. Phys. Soc. A. 62 (1949) 49.10.1088/0370-1298/62/1/308 ↗
21. M. Doyama, J. Nucl. Mater. 70 (1978) 350.10.1016/0022-3115(78)90253-2 ↗
22. G. Graiss, G. Saad, L. N. Makar; Journal of Material Science 25 (1990) 1033.10.1007/BF03372198 ↗
23. I. G. Graiss, G. Saad and A. Fawzy, Phys. Stat. Sol. (a) 110 (1988) 481.10.1002/pssa.2211100220 ↗