journal article·2002-05

Microstructure of laser melted/rapidly solidified γ/Cr3Si metal silicide “in situ” composites

G. Duan, H. M. Wang

Journal of Materials Science· Volume 37· Issue 10
Publisher page

Abstract

In order to improve the ductility of Cr3Si metal silicide alloys, rapidly solidified γ/Cr3Si metal silicide “in situ” composites were fabricated by laser melting/rapid solidification technology using Cr-Si-Ni alloy powders. Microstructure of the γ/Cr3Si “in situ” composites was characterized by OM, SEM, XRD and EDS. The effect of Ni content in the alloy powder on microstructure and hardness of the γ/Cr3Si composites was investigated. The γ/Cr3Si metal silicide “in situ” composites have high hardness and rapidly solidified fine microstructure consisting of primary Cr3Si dendrites and the interdendritic γ/Cr3Si eutectics. The volume fraction of the Cr3Si primary dendrites in the laser melted/rapidly solidified γ/Cr3Si metal silicide “in situ” composites decreases with the increasing nickel content. Because of the presence of the ductile nickel-base solid solution and the rapidly solidified fine microstructure, the γ/Cr3Si metal silicide “in situ” composites are expected to have adequate combination of strength and toughness. The results demonstrate that laser melting/rapid solidification for γ/Cr3Si metal silicide “in situ” composites is a promising toughening method for improving the ductility of Cr3Si metal silicide alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. D. M. SHAH and D. L. ANTON, Mater. Sci. Eng. A 153 (1992) 402.10.1016/0921-5093(92)90228-S ↗
2. D. M. SHAH, D. BERCZIK and D. L. ANTON, ibid. A 155 (1992) 45.10.1016/0921-5093(92)90311-N ↗
3. S. V. RAJ, ibid. A 192/193 (1995) 583.10.1016/0921-5093(94)03281-5 ↗
4. Idem., ibid. A 201 (1995) 229.10.1016/0921-5093(95)09767-8 ↗
5. J. A. SAGO, Thesis, University of Missouri-Rolla, 1996.
6. J. W. NEWKIRK and J. A. SAGO, Mater. Res. Soc. Symp. Proc. 194 (1990) 183.10.1557/PROC-194-183 ↗
7. J. E. PRICE, Thesis, University of Missouri-Rolla, 1995.
8. J. W. NEWKIRK and J. E. PRICE, Mater. Res. Soc. Symp. Proc. 364 (1995) 955.10.1557/PROC-364-955 ↗
9. T. A. CRUSE and J. W. NEWKIRK, in Proc. 1st Int. Non-Ferrous Processing and Technology Conference, St. Louis. MO. March 1997, p. 427.
10. Idem., Mater. Sci. Eng. A 239/240 (1997) 410.10.1016/S0921-5093(97)00611-4 ↗
11. S. V. RAJ, J. D. WHITTENBERGER, B. ZEUMER and G. SAUTHOFF, Intermetallics 7 (1999) 743.10.1016/S0966-9795(98)00095-8 ↗
12. M. NAZMY, C. NOSEDA, G. SAUTHOFF, B. ZEUMER and D. ANTON, Mater. Res. Soc. Symp. Proc. 364 (1994/1995) 1333.10.1557/PROC-364-1333 ↗
13. M. NAZMY, C. NOSEDA, S. AUGUSTIN, P. LIPETZKY and N. S. STOLOFF, ibid. 460 (1996/1997) 727.10.1557/PROC-460-727 ↗
14. A. TOMASI, R. CECCATO, M. NAZMY and S. GIALANELLA, Mater. Sci. Eng. A 239/240 (1997) 877.10.1016/S0921-5093(97)00678-3 ↗