Thermoelectric properties of β-FeSi2 with B4C and BN dispersion by mechanical alloying
Source abstract
Abstract
The B4C- and BN-dispersed β-FeSi2 thermoelectric materials were synthesized by mechanical alloying and subsequent hot pressing. The effects of the B4C and BN dispersion on the thermoelectric properties, such as Seebeck coefficient, electrical resistivity and thermal conductivity etc., of the β-FeSi2 were investigated. For the sample with B4C and BN addition, a larger amount of the residual ∈ phase was detected in the X-ray diffraction patterns than the sample without addition. In the case of the BN addition, the Seebeck coefficient was enhanced by BN addition above 700 K, and the electrical resistivity also increased with increasing amount of BN. This is considered to result from doping of a small amount of B into the β phase due to partial decomposition of the BN phase. The fine dispersion of BN particles in the β phase matrix was quite effective for reducing the thermal conductivity as compared to the B4C addition over the entire temperature range. The figure of merit, Z, of the β-FeSi2 was significantly enhanced by BN addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. K. UEMURA and I. NISHIDA, in “Thermoelectric Semiconductors and their Applications” (Nikkan-Kogyo, Tokyo, 1998) p. 36.
2. H. NAGAI, Mater. Trans., JIM 36 (1995) 365.10.2320/matertrans1989.36.365 ↗
3. R. M. WARE and D. J. McNEILL, Proc. IEE. 111 (1964) 178.
4. U. BIRKHOLZ and J. SCHELM, Phys. Status Solidi 27 (1968) 413.10.1002/pssb.19680270141 ↗
5. J. HESSE and R. BUCKSCH, J. Mater. Sci. 5 (1970) 272.10.1007/BF00551006 ↗
6. G. WALDECKER, H. MEINHOLD and U. BIRKHOLZ, Phys. Status Solidi (a) 15 (1973) 143.10.1002/pssa.2210150116 ↗
7. T. KOJIMA, K. MASUMOTO, M. A. OKAMOTO and I. NISHIDA, J. Less-Common Metals 159 (1990) 299.10.1016/0022-5088(90)90157-F ↗
8. M. KOMABAYASHI, K. HIJIKATA and S. IDO, Jpn. J. Appl. Phys. 30 (1991) 331.10.1143/JJAP.30.331 ↗
9. H. NAGAI, I. MAEDA, S. KATSUYAMA and K. MAJIMA, J. Jpn. Soc. Powder and Powder Metallurgy 41 (1994) 560.10.2497/jjspm.41.560 ↗
10. I. NISHIDA, Phys. Rev. B 7 (1973) 2710.10.1103/PhysRevB.7.2710 ↗
11. J. TANI and H. KIDO, J. Appl. Phys. 86 (1999) 464.10.1063/1.370753 ↗
12. M. UMEMOTO, Mater. Trans., JIM 36 (1995) 373.10.2320/matertrans1989.36.373 ↗
13. H. NAGAI, S. KATSUYAMA, S. AKAYAMA, H. KOBAYASHI, K. MAJIMA and M. ITO, ibid. 39 (1998) 515.10.2320/matertrans1989.39.515 ↗
14. Y. ISODA, I. A. NISHIDA and O. OHASHI, J. Jpn. Inst. Metals 63 (1999) 1372.10.2320/jinstmet1952.63.11_1372 ↗
15. M. ITO, H. NAGAI, S. KATSUYAMA and K. MAJIMA, J. Alloy. Compd. 315 (2001) 251.10.1016/S0925-8388(00)01285-8 ↗
16. M. ITO, H. NAGAI, T. TANAKA, S. KATSUYAMA and K. MAJIMA, ibid.319 (2001) 303.10.1016/S0925-8388(01)00920-3 ↗
17. M. ITO, H. NAGAI, E. ODA, S. KATSUYAMA and K. MAJIMA, J. Appl. Phys. 91 (2002) 2138.10.1063/1.1436302 ↗