journal article·2007-05

Iron-based composite oxides as alternative negative electrodes for lithium-ion batteries

I. Uzunov, S. Uzunova, D. Kovacheva, S. Vasilev, B. Puresheva

Journal of Materials Science· Volume 42· Issue 10
Publisher page

Abstract

Nanosized lithiated iron oxides with 10 and 50 wt.% SiO2 were prepared by a sol–gel method using 1 M Fe(NO3)3 · 9H2O and 1 M LiNO3 aqueous solutions in a stoichiometric ratio of 1:1 and colloidal silica. Dried xerogel was calcinated at 700 °C for 4 h in air. The X-ray data of samples synthesized using 10% and 50% SiO2 showed the presence of a mixture of two phases: α-LiFeO2 and Li1−xFe5O8 (0 < x ≤ 0.1) for a sample containing 10% SiO2 and LiFe(SiO3)2 and Fe2O3 (h) for a sample with 50% SiO2. The electrochemical behaviour of the compounds was investigated galvanostatically within the 0.01–3.0 V range at a current density of 0.80 mA cm−2. The Li/LixFeyOz (10%) · SiO2 cell showed a high initial reversible capacity of 1,080 mA h g−1 and a capacity of 600 mA h g−1 at the 30th cycle. Accounting these results is the presence of a SiO2 phase which stabilizes the structure of the active mass on cycling. The mean charge voltage (1.8 V) and the discharge voltage of 1.0 V versus Li+ reference electrode as well as the high reversible capacity indicate that this material is suitable for use as anode in lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Winter M, Bezenhard JO, Spahr ME, Novak P (1998) Adv Mater 10:72510.1002/(SICI)1521-4095(199807)10:10<725::AID-ADMA725>3.0.CO;2-Z ↗
2. Behm M, Irvine JTS (2002) Electrochem Acta 47:172710.1016/S0013-4686(02)00017-8 ↗
3. Idota Y, Kubota T, Matsufuji A, Maekawa Y, Miyasaka T (1997) Science 276:139510.1126/science.276.5317.1395 ↗
4. Badway F, Plitz I, Grugeon S, Laruelle S, Dolle M, Gozdz AS, Tarascon J-M (2002) Electrochem Solid State Lett 5:A11510.1149/1.1472303 ↗
5. Obrovac MN, Dunlap RA, Sanderson RJ, Dahn (2001) J Electrochem Soc 148(6):A57610.1149/1.1370962 ↗
6. Lee YT, Yoon CS, Lee YS, Sun Y-K (2004) J Power Sources 134:8810.1016/j.jpowsour.2004.02.001 ↗
7. Xu JJ, Jain G (2003) Electrochem Solid State Lett 6(9):A19010.1149/1.1592373 ↗
8. Tabuchi M, Ado K, Sakaevbe H, Masquelier C, Kageyama H, Naklamura O (1995) Solid State Ionics 79:22010.1016/0167-2738(95)00065-E ↗
9. Shirane T, Kanno R, Kawamoto Y, Takeda Y, Kamiyama T, Izumi F (1995) Solid State Ionics 79:22710.1016/0167-2738(95)00066-F ↗
10. Kanno K, Shirane T, Kawamoto Y, Takeda Y, Takano M, Ohashi M, Yamaguchi Y (1996) J Electrochem Soc 143:243510.1149/1.1837027 ↗
11. Liu H, Wu YP, Rahm E, Holze R, Wu HQ (2004) J Solid State Electrochem 8:45010.1007/s10008-004-0521-1 ↗
12. Thackeray MM, David WIF, Goodenough JB (1982) Mat Res Bul 17:78510.1016/0025-5408(82)90029-0 ↗
13. Poizot P, Laruelle S, Gugeon S, Dupont L, Tarascon J-M (2000) Nature 407:49610.1038/35035045 ↗
14. Lee YS, Sato S, Sun YK, Kobayakawa K, Sato Y (2003) Electrochem Commun 5:35910.1016/S1388-2481(03)00067-5 ↗
15. Abraham KM, Pasquariello DM, Willstaedt EB (1990) J Electrochem Soc 137(3):74310.1149/1.2086548 ↗
16. Kim J, Manthiram A (1999) J Electrochem Soc 146(12):437110.1149/1.1392645 ↗
17. Choi S, Manthiram A (2002) J Electrochem Soc 149(5):A57010.1149/1.1466855 ↗
18. Chen J, Xu L, Li W, Gou X (2005) Adv Mater 17:58210.1002/adma.200401101 ↗
19. Kraus W, Nozle G (2000) Power cell program for Windows Ver.2.4. BAM, Berlin
20. Manev V, Momchilov A, Tagawa K, Kozawa A (1993) Prog Batteries Battery Mater 12:157
21. Klein C, Hurlbut Jr CS (1999) In: Manual mineralogy (after JD Dana). Wiley, New York, p 682
22. Pommier C, Downs R, Stimpfl M, Redhammer G, Bonner Denton M (2005) J Raman Spectrosc 36:86410.1002/jrs.1373 ↗