Effect of the grain boundary on the evolution of deformation in a bicrystal
Source abstract
Abstract
The role of grain boundary constraint in strain localization and concomitant constitutive response was examined by performing a series of uniaxial compression tests on a tantalum bicrystal. Tantalum single crystals were diffusion bonded to form a (011) 90^∘ twist boundary that was compressed along the common [011] direction. The plastic deformation resulted in the creation of deformation bands away from the highly constraining grain boundary, resembling those bands known from single crystal plastic deformation. Near the grain boundary, such deformation band formation could not be detected. Instead a distinctive pattern of crystal lattice rotation was observed that filled a rather large volume (several millimeters in size) around the bicrystal grain boundary. The internal deformation band structure as well as the crystal lattice rotation pattern near the bicrystal grain boundary were characterized and found to give greater rates of work hardening in the neighborhood of the grain boundary.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Electromagnetic Effects on Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. M. KUMAR, A. J. SCHWARTZ and W. E. KING, Acta Mater 50 (2002) 2599.10.1016/S1359-6454(02)00090-3 ↗
2. Idem, Mater. Sci. Eng. A 309/310 (2001) 78.10.1016/S0921-5093(00)01771-8 ↗
3. M. KUMAR, K. J. BLOBAUM and J. S. STOLKEN (unpublished results).
4. A. J. SCHWARTZ, W. E. KING, G. H. CAMPBELL, J. S. STOLKEN, D. H. LASSILA, S. SUN and B. L. ADAMS, in “Fracture and Ductile vs. Brittle Behavior; Theory, Modeling & Experiment, ” edited by G. E. Beltz, R. L. Blumberg-Selinger, M. P. Marder and K.-S. Kim (Materials Research Society, Pittsburgh, PA, 1999) p. 221
5. Idem, ASME J. Eng. Mater. Tech 121 (1999) 178.10.1115/1.2812364 ↗
6. A. J. SCHWARTZ, J. S. STOLKEN, W. E. KING and G. H. CAMPBELL, Mater. Sci. Eng. A 317 (2001) 77.10.1016/S0921-5093(01)01182-0 ↗
7. W. L. WIEN, G. H. CAMPBELL and W. E. KING, in “Microstructural Science, ” edited by D. W. Stevens, E. A. Clark, D. C. Zipperian and E. D. Albrecht (ASM International, Materials Park, OH, 1996) p. 213.
8. F. C. FRANK, Metall. Trans. A 19 (1988) 403.10.1007/BF02649253 ↗
9. W. BOLLMANN, in “Crystal Defects and Crystalline Interfaces” (Springer-Verlag, Berlin, 1970).10.1007/978-3-642-49173-3 ↗
10. W. E. KING, G. H. CAMPBELL, A. W. COOMBS, G. W. JOHNSON, B. E. KELLY, T. C. REITZ, S. L. STONER, W. L. WIEN and D. M. WILSON, in “Joining and Adhesion of Advanced Inorganic Materials, ” edited by A. H. Carim, D. S. Schwartz and R. S. Silberglitt (Materials Research Society, Pittsburgh, PA, 1993) p. 61.
11. R. L. SMIALEK and T. E. MITCHELL, Philos. Mag 22 (1970) 1105.10.1080/14786437008226921 ↗
12. W. F. HOSFORD JR., Trans. Metall. Soc. AIME 230 (1964) 12.