journal article·2007-02-14

Elastic properties of powders during compaction. Part 2: elastic anisotropy

M. L. Hentschel, N. W. Page

Journal of Materials Science· Volume 42· Issue 4
Publisher page

Abstract

Isotropy in the elastic properties of powders undergoing uniaxial compaction in a cylindrical die was evaluated from in situ measurements of elastic wave speed. Shear and bulk longitudinal wave speeds were measured in both the axial (pressing) and radial directions. For the five different metal powders studied, wave speeds were generally higher in the axial direction. As such, the powder body was best described as a transversely isotropic material; complete isotropy was approached only when the powder was close to the loose packed state, or completely solid. Transversely isotropic elastic moduli analogous to the common isotropic ‘engineering’ moduli (Young’s modulus, Poisson’s ratio, etc.) were calculated by combining elastic wave speed measurements with the Saint-Venant approximation. Pseudo-isotropic elastic moduli (calculated from axial wave speed measurements and assuming elastic isotropy) were found to be only qualitatively similar to transversely isotropic elastic moduli for the axial plane.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · High-Velocity Impact and Material Behavior · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. German RM (1994) Powder metallurgy science, 2nd edn. Metal Powder Industries Federation, New Jersey
2. Özkan N, Briscoe BJ (1997) Ceram Int 23:52110.1016/S0272-8842(96)00065-X ↗
3. Özkan N, Briscoe BJ (1997) J Eur Ceram Soc 17:69710.1016/S0955-2219(96)00090-8 ↗
4. Deis TA, Lannutti JL (1998) J Am Ceram Soc 81:123710.1111/j.1151-2916.1998.tb02474.x ↗
5. Rajab M, Coleman DS (1985) Powder Metall 28:20710.1179/pom.1985.28.4.207 ↗
6. Thompson RA (1981) Ceram Bull 60:237
7. Liu C-H, Nagel SR, Schecter DA, Coppersmith SN, Majumdar S, Narayan O, Witten TA (1995) Science 269:51310.1126/science.269.5223.513 ↗
8. Rice RW, Donahue TJ (1979) J Am Ceram Soc 62:30610.1111/j.1151-2916.1979.tb09486.x ↗
9. Dawson ALeR, Piché L, Hamel A (1996) Powder Metall 39:27510.1179/pom.1996.39.4.275 ↗
10. Hentschel ML (2002) PhD thesis, The University of Newcastle
11. Meyers MA (1994) Dynamic behaviour of materials. Wiley, New York10.1002/9780470172278 ↗
12. Love AEH (1944) A treatise on the mathematical theory of elasticity, 4th edn. Dover, New York
13. Timoshenko SP, Goodier JN (1982) Theory of elasticity, 3rd edn. McGraw-Hill, Singapore
14. Boresi AP, Schmidt RJ, Sidebottom OM (1993) Advanced mechanics of materials, 5th edn. Wiley, New York
15. Hardin BO, Blandford GE (1989) J Geotech Engng 115:78810.1061/(ASCE)0733-9410(1989)115:6(788) ↗
16. Matikas TE, Kapur P, Shamasundar S (1997) J Mater Sci 32:109910.1023/A:1018503127949 ↗
17. Jones MP, Blessing GV (1988) In: McGonnagle WJ (ed) International advances in nondestructive testing, vol 13. Gordon & Breach, New York, p 175
18. Kathrina T, Rawlings RD (1997) J Eur Ceram Soc 17:115710.1016/S0955-2219(96)00202-6 ↗
19. Carnavas PC, Page NW (1998) J Mater Sci 33:464710.1023/A:1004445527430 ↗
20. Jones MP, Blessing GV (1987) In: Proceedings of 1987 IEEE ultrasonics symposium, vol 1186, p 58710.1109/ULTSYM.1987.199025 ↗
21. Kendall K (1990) Br Ceram Trans 89:211
22. Denny PJ (2002) Powder Technol 127:16210.1016/S0032-5910(02)00111-0 ↗
23. Briscoe BJ, Rough SL (1998) Colloids Surfaces A 137:10310.1016/S0927-7757(97)00210-0 ↗
24. Reed JS (1995) Principles of ceramic processing, 2nd edn. Wiley, New York
25. Rice RW (1998) Porosity of ceramics. Marcel Dekker, New York
26. Scarlett B, Van Der Kraan M, Janssen RJM (1998) Philos Trans R Soc Lond Ser A 356:262310.1098/rsta.1998.0290 ↗
27. Shima S, Saleh MAE (1993) J Am Ceram Soc 76:130310.1111/j.1151-2916.1993.tb03755.x ↗
28. Boccaccini AR (1993) J Mater Sci Lett 12:4310.1007/BF00455626 ↗
29. Zavaliangos A, Bouvard D (2000) Int J Powder Metall 30:58
30. Martin LP, Nagle D, Rosen M (1998) Mater Sci Eng A 246:15110.1016/S0921-5093(97)00757-0 ↗
31. Parthasarathi S, Prucher T (1993) In: Proceedings of the 3rd international conference on powder metallurgy in aerospace, defence, and demanding applications, February 1993, p 75
32. Krzesiñska M, Celzard A, Marêché JF, Puricelli S (2001) J Mater Res 16:60610.1557/JMR.2001.0087 ↗
33. Patterson BR, Miljus KL, Knoop WV (1984) Metal Powder Report 39:145
34. Laughton AS (1957) Geophysics 22:23310.1190/1.1438353 ↗
35. Brettell JM (1990) J App Phys D 23:62010.1088/0022-3727/23/5/024 ↗
36. Kupperman DS, Karplus HB (1984) Ceram Bull 63:1505
37. Bućko MM, Haberko K (1999) J Mater Sci 34:615710.1023/A:1004730206432 ↗
38. Mason WP (1958) Physical acoustics and the properties of solids. Van Nostrand, New Jersey
39. Worotnicki G (1993) In: Hudson JA (ed) Comprehensive rock engineering: principles, practice, and projects. Vol 3, Rock testing and site characterisation. Pergamon, Oxford
40. Amadei R (1996) Int J Rock Mech Min Sci Geomech Abstr 33:29310.1016/0148-9062(95)00062-3 ↗
41. Shafiro B, Kachanov M (1999) J Mech Phys Solids 47:87710.1016/S0022-5096(98)00073-8 ↗
42. Zhao YH, Tandon GP, Weng GJ (1989) Acta Mech 76:10510.1007/BF01175799 ↗
43. Duffy J (1959) Trans ASME J Appl Mech 25:8810.2307/2954479 ↗