journal article·2011-02

Influence of fibre orientation on three-body abrasive wear behaviour of unidirectional carbon fibre-reinforced polyetherimide composite

A. P. Harsha, Suresh Arjula

Journal of Materials Science· Volume 46· Issue 4
Publisher page

Abstract

Three-body abrasive wear behaviour of neat polyetherimide (PEI) and unidirectional carbon fibre-reinforced PEI (CF/PEI) has been studied using a rubber wheel abrasion test rig. The abrasive wear studies were carried out at different loads (5–20 N) at a constant sliding velocity (v = 2.4 m/s) of rubber wheel. The influence of fibre orientation, i.e. parallel (P-fibre orientation) and anti-parallel (AP-fibre orientation) on wear rate of CF/PEI composite has also been studied. The results showed that the fibre orientation has a significant influence on the three-body abrasive wear behaviour of CF/PEI. The abrasive wear rate was higher when fibres are oriented at anti-parallel than that of parallel orientation of fibres. The worn surfaces have been observed using scanning electron microscope to understand the possible wear mechanisms involved during material removal processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tribology and Wear Analysis · Orthopaedic implants and arthroplasty · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Tylczak JH, Oregon A (1992) Friction, lubrication and wear technology, vol 18. ASM hand book. p 184
2. Tsukizoe T, Ohmae N (1975) Tribol Int 8:17110.1016/0301-679X(75)90064-X ↗
3. Tsukizoe T, Ohmae N (1976) Ind Lubr Tribol 28:1910.1108/eb053105 ↗
4. Tsukizoe T, Ohmae N (1977) J Lubr Technol 99:40110.1115/1.3453233 ↗
5. Cirino M, Friedrich K, Pipes RB (1988) Wear 121:12710.1016/0043-1648(88)90038-5 ↗
6. Lamy B, Burtin C (1992) Tribol Int 25:7110.1016/0301-679X(92)90123-5 ↗
7. Zum Gahr KH (1988) Tribol Int 31:58710.1016/S0301-679X(98)00079-6 ↗
8. Lee GY, Dharan CKH, Ritchie RO (2002) Wear 252:32210.1016/S0043-1648(01)00896-1 ↗
9. Chang HW (1983) Wear 85:8110.1016/0043-1648(83)90337-X ↗
10. Lhymn C (1987) Wear 117:14710.1016/0043-1648(87)90252-3 ↗
11. Mody PB, Chou TW, Friedrich K (1988) J Mater Sci 23:4319. doi: 10.1007/BF0055192610.1007/BF00551926 ↗
12. Ovaert TC (1995) Tribol Trans 38:2710.1080/10402009508983376 ↗
13. Ovaert TC (1997) Tribol Trans 40:22710.1080/10402009708983649 ↗
14. Friedrich K, Reincke P (1998) Mech Comp Mater 34:50310.1007/BF02254659 ↗
15. Cirino M, Friedrich K, Pipes RB (1988) Composites 19:38310.1016/0010-4361(88)90126-7 ↗
16. Cirino M, Pipes RB, Friedrich K (1987) J Mater Sci 22:2481. doi: 10.1007/BF0108213410.1007/BF01082134 ↗
17. McGee AC, Dharan CKH, Finnie I (1987) Wear 114:9710.1016/0043-1648(87)90019-6 ↗
18. Jacobs O, Friedrich K, Marom G, Schulte K, Wagner HD (1990) Wear 135:20710.1016/0043-1648(90)90025-6 ↗
19. Misra A, Finnie I (1980) Wear 60:11110.1016/0043-1648(80)90252-5 ↗
20. Lhymn C, Tempelmeyer KE, Davis PK (1985) Composites 16:12710.1016/0010-4361(85)90619-6 ↗
21. Voss H, Friedrich K (1986) Tribol Int 19:14510.1016/0301-679X(86)90021-6 ↗
22. Voss H, Friedrich K (1987) Wear 116:110.1016/0043-1648(87)90262-6 ↗
23. Chin CW, Yousif F (2010) J Eng Tribol 224:481
24. Archard JF (1953) J Appl Phys 24:98110.1063/1.1721448 ↗
25. Harsha AP, Tewari US, Venkatraman B (2003) Wear 254:68010.1016/S0043-1648(03)00142-X ↗
26. Harsha AP, Tewari US (2003) Polym Test 22:40310.1016/S0142-9418(02)00121-6 ↗
27. Hutchings IM (2002) Tribology: friction and wear of engineering materials. Butterworth-Heinemann, Oxford, p 174
28. Cenna AA, Doyle J, Page NW, Beehag A, Dastoor P (2000) Wear 240:20710.1016/S0043-1648(00)00365-3 ↗
29. Cenna AA, Allen S, Page NW, Dastoor P (2001) Wear 249:66310.1016/S0043-1648(01)00691-3 ↗