journal article·2002-11

Preliminary investigation into the application of scratch testing to marine coatings

S. J. Bull, R. I. Davidson, K. Harvathova, D. Mitchell, J. R. White

Journal of Materials Science· Volume 37· Issue 22
Publisher page

Abstract

Controlled scratch testing has been applied to experimental coatings of the kind used on marine structures, based on epoxy-amine resins. Measurements of the scratch hardness and the critical load to failure have been made. Inspection of the scratch tracks by reflected light microscopy and scanning electron microscopy enabled identification of the failure mechanism. Failure could be by though-thickness cracking or adhesion failure. The failure mechanism is sensitive to the coating thickness and detachment from the substrate was obtained only from coatings less than 300 μm thick in the as-prepared state for tests conducted with a limiting load of 80 N. The deterioration of properties of samples immersed in hot seawater was very sensitive to composition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Energetic Materials and Combustion · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S. J. BULL, in “Adhesion Measurement of Films and Coatings, ” Vol. 2, edited by K. L. Mittal (VSP, Utrecht, The Netherlands, 2001) p. 107.
2. S. K. VENKATARAMAN, J. C. NELSON, A. J. HSIEH, D. L. KOHLSTEDT and W. W. GERBERICH, in “Adhesion Measurement of Films and Coatings, ” edited by K. L. Mittal (VSP, Utrecht, The Netherlands, 1995) p. 161.10.1515/9783112318966-012 ↗
3. P. BENJAMIN and C. WEAVER, Proc. Roy. Soc. A 254 (1960) 177.
4. Idem., ibid. 261 (1961) 516.10.1098/rspa.1961.0093 ↗
5. D. W. BUTLER, C. T. H. STODDARD and P. R. STEWART, J. Phys. D 3 (1970) 877.10.1088/0022-3727/3/6/307 ↗
6. M. J. LAUGIER, Thin Solid Films 117 (1984) 243.10.1016/0040-6090(84)90354-7 ↗
7. Idem., J. Mater. Sci. 21 (1986) 2269.10.1007/BF01114266 ↗
8. P. J. BURNETT and D. S. RICKERBY, Thin Solid Films 154 (1987) 403.10.1016/0040-6090(87)90382-8 ↗
9. S. J. BULL, D. S. RICKERBY, A. MATTHEWS, A. R. PACE and A. LEYLAND, Surf. Coat. Technol. 36 (1988) 503.10.1016/0257-8972(88)90178-8 ↗
10. S. J. BULL and D. S. RICKERBY, ibid. 42 (1990) 149.10.1016/0257-8972(90)90121-R ↗
11. R. D. ARNELL, ibid. 43/44 (1990) 674.10.1016/0257-8972(90)90011-Z ↗
12. S. J. BULL, ibid. 50 (1991) 25.10.1016/0257-8972(91)90188-3 ↗
13. Idem., Tribology Int. 7 (1995) 491.
14. GU YAN and J. R. WHITE, Polym. Eng. Sci. 39 (1999) 1856.10.1002/pen.11579 ↗
15. Idem., ibid. 39 (1999) 1866.
16. O. NEGELE and W. FUNKE, Prog.Org. Coatings 28 (1996) 285.10.1016/0300-9440(95)00606-0 ↗
17. B. J. BRISCOE, P. D. EVANS, S. K. BISWAS and S. K. SINHA, Tribology Int. 29 (1996).10.1016/0301-679X(95)00045-6 ↗
18. B. J. BRISCOE, in New Directions in Tribology: Proc. 1stWorld Tribology Conference, London, MEP Ltd. (1997) p. 191.