journal article·2003-12

High-temperature thermal barrier coating formation by laser alloying of CP-Ti with pre-placed Ni-SiC coating

J. S. Selvan, K. Subramanian

Journal of Materials Science· Volume 38· Issue 23
Publisher page

Abstract

High-temperature thermal barrier coating was created on CP-Ti using a pre-placed Ni-SiC layer by laser alloying technique. The coating was developed using 80% Ni + 20% SiC, 50% Ni + 50% SiC and 60% Ni + 40% SiC, and the latter two compositions are found to be efficient in producing a uniform layer. The 100% SiC pre-placement was also used. A flaw-less coating of 0.4–0.6 mm thickness was produced at a lower power density of 1.3 to 1.9 × 105 W cm−2. Very high power density of 2.5–3.0 × 105 W cm−2 is inefficient to produce uniform coating. The laser alloyed coating consists of dendrites and intermetallic precipitates. The degree of dendrite population depends upon the coating composition and laser processing conditions. The coating hardness was 600–1200 HV, which is three to six times higher than the base titanium. Uniform hardness was obtained for the coatings produced at a laser power density of 1.3 × 105 W cm−2. The titanium silicide (TiNiSi, Ti5Si3, TiSi) and nickelide (NiTi2) phases formed on the laser-alloyed coating surface was confirmed by X-ray analysis. These intermetallic phases can improve high-temperature properties of titanium and its alloys. The effect of laser power density and coating composition on the alloying depth alloying width, hardness and microstructure are discussed. The present work investigated the microstructure evolution, hardness and compound phases by means of optical and scanning electron microscopy, Vickers hardness testing, EDXRD and SIMS analysis. A 5 kW CW CO2 laser was used for laser alloying experiments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. V. P. Swaminathan and N. S. Cheruvu, “Advanced Materials and Coatings for Combustion Turbines” (ASM International, Materials Park, OH, 1994).
2. G. W. Goward Mater. Sci. Tech. 2 (1986) 194.10.1179/mst.1986.2.3.194 ↗
3. T. N. Rhys-Jones Surf. and Coating Tech. 43/44 (1990) 402.10.1016/0257-8972(90)90092-Q ↗
4. F. S. Petit and G. W. Goward, in “Coatings For High-temperature Applications,” edited by E. Lang (Applied Science Publishers, Essex, England, 1983) p. 341.
5. R. Meverel C. Duret and R. Pichoir Mater. Sci. Tech. 2 (1986) 201.10.1179/mst.1986.2.3.201 ↗
6. R. J. Gill and R. C. Jr. Tuckker ibid. 2 (1986) 207.10.1179/mst.1986.2.3.207 ↗
7. A. R. Nicoll H. Gruner G. Wuest and S. Keller ibid. 2 (1986) 214.10.1179/mst.1986.2.3.214 ↗
8. D. F. Betridge and R. G. Ubank ibid. 2 (1986) 232.10.1179/mst.1986.2.3.232 ↗
9. D. H. Boone ibid. 2 (1986) 232.10.1179/mst.1986.2.3.220 ↗
10. E. Vandehhar P. A. Molian and M. Baldwin Surf. Eng. 4 (1988) 159.10.1179/sur.1988.4.2.159 ↗
11. G. W. Goward, in “Source Book on Materials for Elevated Temperature Applications,” edited by E. F. Bradley (ASM International, Materials Park, OH, 1979), p. 369.
12. P. C. Felix, in “Materials and Coatings to Resist High-temperature Corrosion,” edited by D. R. Holmes and A. Rahmel (Applied Science Publishers Ltd., Essex, England, 1978) p. 199.
13. W. Betz, in “Materials and Coatings to Resist High-Temperature Corrosion,” edited by D. R. Holmes and A. Rahmel (Applied Science Publishers Ltd., Essex, England, 1978) p. 185.
14. S. Chakrawarthy P. Li. V. Tirabasso and P. C. Patnaik, in Proceedings of American Society of Metals-Materials Week'93, Pittsburg, Pennsylvania, 1993 p. 135.
15. J. L. Cocking P. G. Richards and G. R. Johnston Surf. and Coatings Tech. 36 (1988) 37.10.1016/0257-8972(88)90134-X ↗
16. L. Singheiser H. W. Grunling, and K. Scheider ibid. 42 (1990) 101.10.1016/0257-8972(90)90118-V ↗
17. M. G. Hocking and V. Vasantasree Mater. Sci. Tech. 2 (1986) 318.10.1179/mst.1986.2.3.318 ↗
18. S. K. Lau R. J. Brattone and S. Y. Lee, in “High-Temperature Corrosion,” edited by R. A. Raps (1981), p. 628.
19. T. Amos Aircraft Eng. Aerospace Tech. 68(3) (1996) 23.10.1108/eb037635 ↗
20. Terry Ford ibid. 66(4) (1994) 5.10.1108/eb037498 ↗
21. Terry Ford ibid. 66(4) (1994) 5.10.1108/eb037498 ↗
22. A. Edwards ibid. 67(1) (1995) 7.10.1108/eb037536 ↗
23. C. D. Desforges, in “Source Book on Materials for Elevated-Temperature Applications,” edited by E. F. Bradley (ASM International, OH, 1979) p. 1.
24. C. P. Vijayan J. Hojo J. J. Hechler B. Champagne and S. Dallaire, in Proc. Electroless Nickel Conference IV, Chicago, 1985, p. 3.1.
25. Y. Li Plating and Surface Finishing 84 (1997) 71.
26. Indira Rajagopal in “Surface Modification Technology,” edited by T. S. Sudarshan (Marcel Dekker., Inc. New York, 1989) p.
27. Y. T. Pei J. H. Ouyangm T. C. Lei and Y. Zhou Ceram. Int. 21(2) (1995) 131.10.1016/0272-8842(95)95884-K ↗
28. S. Weissman Benjamin Post. M. E. Mrose H. F. McMurdie and M. C. Morris, “Search Manual for Selected Powder Diffraction Data for Metals and Alloys, Vol. I-II” (JCPDS, Penn., USA, 1978). The Powder Diffraction File Nos. 17–424, 8–41 & 41A, 27–344, 15–716, 05–682.
29. S. Eskin J. Zahavi and A. Berner Lasers in Engineering 84 (1997) 71.
30. Hugh Baker, “ASM Hand book-Alloy Phase Diagrams, Vol. 3” (ASM International, Materials Park, OH, 1992) p. 2.114.
31. S. M. L. Sastry T. C. Peng P. J. Meschter and J. E. O'Neal JOM 35(9) (1983) 21.10.1007/BF03338360 ↗
32. S. H. Whang Y. Z. Lu and Y. W. Kim J. Mater. Sci. Lett. 4 (1985) 883.10.1007/BF00720529 ↗
33. Y. M. Yin and C. V. Lupinc Scrip. Metall. 37 (1997) 211.10.1016/S1359-6462(97)00077-8 ↗
34. R. Radhakrishnan S. Bhaduri and C. H. Jr. Henager JOM 49(1) (1997) 41.10.1007/BF02914631 ↗
35. K. Ito M. Moriwaki T. Nakamoto H. Inui and M. Yamaguchi Mater. Sci. Eng A. A233 (1997) 33.10.1016/S0921-5093(97)00046-4 ↗
36. W. B. Johnson and A. S. Nagelberg, in “Phase Diagrams in Advanced Ceramics,” edited by A. M. Alper (Academic Press, Inc. California, 1995) p. 108.