journal article·2004-01

Candidate oxidation resistant coatings via combustion chemical vapor deposition

S. Shanmugham, M. Hendrick, N. Richards, M. Oljaca

Journal of Materials Science· Volume 39· Issue 1
Publisher page

Abstract

Oxidation and water vapor resistant coatings are needed to increase the life time of metallic and ceramic substrates for high temperature applications (>1000 ◦C). Oxides including yttria, tantalum oxide, and alumina are leading candidate materials that are being considered [1–5]. These coatings have been produced as thin films by chemical vapor deposition (CVD) and/or sol-gel methods [3–6]. Combustion CVD (CCVD) is another viable coating technology that has been developed to produce high-quality oxide and noble metal thin films [7–10]. In this CCVD process, precursors such as nitrates and acetylacetonates are dissolved in suitable aqueous or organic solvents to form a solution. This solution is delivered via a pump to the Nanomiser©R device that atomizes the solution into submicron droplets. These droplets are then carried or convected by oxygen or another suitable gas to a flame where they are vaporized and combusted. Coatings are deposited onto the substrate by rastering the flame plasma. The heat from the flame supplies the energy required to evaporate the atomized droplets, causing precursors to react or decompose to form the desired material while flowing to vapor deposit onto the substrate. The CCVD technique offers the advantage of producing single and multicomponent oxides with relative ease, thus providing a unique, competitive edge over conventional methods in rapidly developing oxides. Additionally, multilayering and doping of oxides can be easily accomplished. The features and benefits of the technology are expounded in detail elsewhere [7–9]. In this paper, we report the synthesis of tantalum oxide, yttria, and alumina coatings via CCVD. Generally speaking, precursors used in this study have low vapor pressure and high solubility (such as metal nitrates, acetylacetonates, and ethylhexanoates). These precursors were dissolved in suitable organic or inorganic solvents to form starting solution. This solution was used with the CCVD process to deposit coatings onto YSZ, fused silica and/or sapphire substrates. These substrates were used so that cross-sections could be readily produced via fracture. The substrate was mounted on the fixture with the flame aimed at it. The flame temperature was measured adjacent to the substrate via a thermocouple and depositions were done at flame temperatures ranging from 800 ◦C to 1300 ◦C and the substrate
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. K. N. Lee, Surf. Coat. Technol. 133/134 (2000) 1.10.1016/S0257-8972(00)00889-6 ↗
2. K. N. Lee and R. A. Miller, ibid. 86/87 (1996) 142.10.1016/S0257-8972(96)03074-5 ↗
3. Y. W. Bae, W. Y. Lee and D. P. Stinton, J. Amer. Ceram. Soc. 78(5) (1995) 1297.10.1111/j.1151-2916.1995.tb08485.x ↗
4. M. L. Auger and V. K. Sarin, Surf. Coat. Technol. 94/95 (1997) 46.10.1016/S0257-8972(97)00474-X ↗
5. S. Shanmugham, P. K. Liaw, D. P. Stinton, T. M. Besmann, K. L. More, A. Bleier, W. D. Porter and S. T. Misture, in “Advanced Synthesis and Processing of Composites and Advanced Ceramics II, Ceramic Transactions,” Vol. 79, edited by K. V. Logan, Zuhair A. Munir and Richard M. Spriggs (The American Ceramic Society, 1996) p. 71.
6. D. W. Graham and D. P. Stinton, J. Amer. Ceram. Soc. 77(9) (1994) 2298.10.1111/j.1151-2916.1994.tb04597.x ↗
7. A. T. Hunt, W. B. Carter and J. K. Cochran, Appl. Phys. Lett. 63(2) (1993) 266.10.1063/1.110362 ↗
8. S. Shanmugham, A. Hunt and D. Motley, Amer. Ceram. Bull. 81(5) (2002) 36.
9. M. Hendrick, S. Shanmugham and A. T. Hunt, in “Elevated Temperature Coatings: Science and Technology III,” edited by J. M. Hampikian and N. B. Dahotre (The Minerals, Metals and Materials Society, 1999) p. 253.
10. S. S. Shoup, S. Shanmugham, D. Cousins, A. T. Hunt, M. Paranthaman, A. Goyal, P. Martin and D. M. Kroeger, IEEE Trans. Appl. Supercond. 9(2) (1999) 2426.10.1109/77.784963 ↗