journal article·2011-04Open access

Characterization of light-cured dimethacrylate resins modified with silsesquioxanes

Silvana Asmussen, Claudia Vallo

Journal of Materials Science· Volume 46· Issue 7

Abstract

Methacrylate-functionalized silsesquioxanes (SSQO) were synthesized by the hydrolytic condensation of 3-(methacryloxypropyl) trimethoxysilane (MPTMS) using dimethacrylate monomers as reactive solvent. Resins containing about 40 wt% SSQO displayed a modest increase in viscosity compared with the unmodified methacrylate monomer. This is attributed to a dilution of the reacting medium, which discourages bimolecular reactions that lead to the generation of high-molar mass oligomers and, consequently, prevents undesired increases of viscosity. Substitution of monomer with SSQO reduced the volumetric shrinkage during photopolymerization. The amount of leachable monomer detected in formulations containing SSQO was markedly reduced. This indicates that the unreacted monomer exists mainly as pendant chains instead of free leachable monomer. The presence of different proportions of SSQO in the methacrylate monomer resulted in no apparent change in the flexural modulus and in a modest decrease in the compressive yield stress of the polymerized materials. From results presented in this research, it emerges that methacrylate monomers modified with SSQO are attractive for applications that require reduced volumetric shrinkage and long storage periods, such as light-cured dental restorative composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Photopolymerization techniques and applications · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Satterthwaite JD, Vogel K, Watts DC (2009) Dent Mater 25:161210.1016/j.dental.2009.08.012 ↗
2. Mucci V, Arenas G, Duchowiczc R, Cook WD, Vallo C (2009) Dent Mater 25:10310.1016/j.dental.2008.04.014 ↗
3. Klee JE, Schneider C, Hölter D, Burgath A, Frey H, Mülhaupt R (2001) Polym Adv Technol 12:34610.1002/pat.116 ↗
4. Moszner N, Klapdohr S (2004) Int J Nanotechnol 1:13010.1504/IJNT.2004.003723 ↗
5. Müh E, Stieger M, Klee JE, Frey H, Mülhaupt R (2001) J Polym Sci Polym Chem 39:427410.1002/pola.10079 ↗
6. Moszner N, Völkel T, Clausbruch SC, Geiter E, Batliner N, Rheinberger V (2002) Macromol Mater Eng 287:33910.1002/1439-2054(20020501)287:5<339::AID-MAME339>3.0.CO;2-1 ↗
7. Pavlinec J, Moszner N (2003) Macromol Mater Eng 288:78910.1002/mame.200300066 ↗
8. Müh E, Marquardt J, Klee JE, Frey H, Mülhaupt R (2001) Macromolecules 34:577810.1021/ma010394u ↗
9. Moszner N, Gianasmidis A, Klapdohr S, Fischer UK, Rheinberg V (2008) Dent Mater 24:85110.1016/j.dental.2007.10.004 ↗
10. Fong H, Dickens SH, Flaim GM (2005) Dent Mater 21:52010.1016/j.dental.2004.08.003 ↗
11. Gao F, Tong Y, Schricker S, Cubertson BM (2001) Polym Adv Technol 12:35510.1002/pat.117 ↗
12. Klapdohr S, Moszner N, Kickelbick G, Krüger RP (2006) Monat Chem 137:66710.1007/s00706-006-0442-z ↗
13. Antonucci JM, Dickens SH, Fowler BO, Xu H, NcDonough WG (2005) J Res Natl Inst Stand Technol 10:54110.6028/jres.110.081 ↗
14. Jones IK, Zhou YX, Jeelani S, Mabry JM (2008) eXPRESS Polym Lett 2:49410.3144/expresspolymlett.2008.59 ↗
15. Weickmann G, Delto R, Thomann R, Brenn R, Döll W, Mülhaupt R (2007) J Mater Sci 42:87. doi: 10.1007/s10853-006-1044-110.1007/s10853-006-1044-1 ↗
16. Kopesky ET, McKinley GH, Cohen RE (2006) Polymer 47:29910.1016/j.polymer.2005.10.143 ↗
17. Zhang X, Huang Y, Wang T, Hu L (2007) J Mater Sci 42:5264. doi: 10.1007/s10853-006-0349-410.1007/s10853-006-0349-4 ↗
18. Stansbury J, Dickens S (2001) Dent Mater 17:7110.1016/S0109-5641(00)00062-2 ↗
19. Schroeder W, Vallo C (2007) Dent Mater 23:131310.1016/j.dental.2006.11.010 ↗
20. Sharp KJ (1994) Sol-Gel Sci Technol 2:3510.1007/BF00486210 ↗
21. Piana K, Schubert U (1994) Chem Mater 6:150410.1021/cm00045a006 ↗
22. Wallace WE, Guttman CM, Antonucci JM (1999) J Am Soc Mass Spectrom 10:22410.1016/S1044-0305(98)00147-0 ↗
23. Wallace WE, Guttman CM, Antonucci JM (2000) Polymer 41:221910.1016/S0032-3861(99)00386-9 ↗
24. Farahani M, Antonucci JM, Karam LR (1998) J Appl Polym Sci 67:154510.1002/(SICI)1097-4628(19980228)67:9<1545::AID-APP6>3.0.CO;2-D ↗
25. Feuillade M, Croutxé-Barghorn C, Carré C (2006) J Non-Cryst Solids 352:33410.1016/j.jnoncrysol.2005.12.007 ↗
26. Caughman WF, Caughman GB, Shiflett R, Rueggeberg F, Schuster G (1991) Biomaterials 12:73710.1016/0142-9612(91)90022-3 ↗
27. Vallo CI (2002) Polym Test 21:79310.1016/S0142-9418(02)00013-2 ↗
28. Giannotti MI, Galante MJ, Oyanguren PA, Vallo CI (2003) Polym Test 2:42910.1016/S0142-9418(02)00124-1 ↗