journal article·2005-04

On Sneddon?s boundary conditions used in the analysis of nanoindentation data

Guanghui Fu, Anthony C. Fischer-Cripps

Journal of Materials Science· Volume 40· Issue 7
Publisher page

Abstract

Sneddon’s solution [1] on the indentation of an elastic half-space with a rigid conical indenter has been the basis of nanoindentation data analysis for more than a decade [2]. In their finite element simulation, Hay, Bolshakov, and Pharr find that Sneddon’s solution is not an exact representation of the actual contact [3]. Both the indenter shape and Sneddon’s solution have to be modified before it can be used in the interpretation of nanoindentation data. We find that this happens due to the fact that Sneddon’s boundary conditions do not represent the actual contact. Because the points of the halfspace surface in the contact region move only along the indenter surface in a real contact, the r -displacement and z-displacement of those points are coupled. However, Sneddon’s boundary conditions only specify the z-displacement. Sneddon’s way of specifying boundary conditions is common in contact mechanics: people only specify the z-displacement for rigid punch problems and take it for granted that the final surface shape of the contact area is the same as that of the punch [4]. The correct boundary conditions for the actual contact are presented in this paper. These boundary conditions can be changed exactly to Sneddon’s boundary conditions if there is no radial surface displacement. They can also be changed approximately to Sneddon’s boundary conditions if the half-included angle of the cone is near 90◦, i.e., within the limit of the linear elasticity. Similar conclusions can be drawn for rigid smooth frictionless axisymmetric indenters. Sneddon’s boundary conditions for the indentation of an elastic half-space by a rigid frictionless cone are at z = 0 (see Fig. 1):
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. I. N. SNEDDON, Int. J. Eng. Sci.3 (1965) 47.10.1016/0020-7225(65)90019-4 ↗
2. W. C. OLIVER and G. M. PHARR, J. Mater. Res.7 (1992) 1564.10.1557/JMR.1992.1564 ↗
3. J. C. HAY, A. BOLSHAKOV and G. M. PHARR, ibid.14 (1999) 2296.10.1557/JMR.1999.0306 ↗
4. I. N. SNEDDON, in ?Mixed Boundary Value Problems in Potential Theory? (North-Holland Publishing Company, Amsterdam, Holland, 1966).
5. I. N. SNEDDON, in ?Fourier Transforms? (McGraw-Hill Book Company, Inc., New York, 1951), p. 450.
6. W. C. OLIVER and G. M. PHARR, J. Mater. Res.19 (2004) 3.10.1557/jmr.2004.19.1.3 ↗