journal article·2008-03

Experimental Zn-rich corner of the Fe–Zn–Cu ternary phase diagram at 460 °C

M.-N. Avettand-Fènoël, A. Hadadi, G. Reumont, P. Perrot

Journal of Materials Science· Volume 43· Issue 5
Publisher page

Abstract

The zinc-rich corner of the Fe-Cu-Zn ternary system diagram at 460°C was investigated. Two low-carbon steel substrates were prepared where the first substrate was rolled with a copper wire. A copper piece was hammered in the middle of the second one to make a rivet. The samples were then batch galvanized at 460°C for one hour in a zinc bath saturated with iron and added with 2.9% at Cu. The two specimens were either air cooled or water quenched. The microstructure of the coatings was characterized by scanning electron microscopy and analyzed by energy dispersive spectroscopy. All the chemical compositions were then reported in the isothermal section at 460°C of the Fe-Cu-Zn ternary phase diagram. A succession of phases in equilibrium were observed between copper, steel and the other galvanized layer. Moreover, various equilibria between different phases with specific compositions were found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Marder AR (2000) Prog Mater Sci 45:19110.1016/S0079-6425(98)00006-1 ↗
2. Avettand-Fènoël M-N, Reumont G, Perrot P (2006) Intergalva conf., Naples
3. Katiforis N, Papadimitriou G (1996) Surf Coat Technol 78:18510.1016/0257-8972(94)02408-1 ↗
4. Shemenski RM, Kim (1985) Method of making and using ternary alloy coated steel wire, US Patent 4,545,834
5. Nishimura Y, Yoshimuva Y (1989) Process for producing a metal wire useful as rubber product reinforcement, US Patent 4,859,289
6. Dauphin J-Y, Perrot P, Tchissambot UG (1987) Mem Sci Rev Metall 84(6):329
7. Raghavan V (2003) J Phase Equilib 24(6):54410.1361/105497103772084598 ↗
8. Miodownik AP (1990) Binary alloy phase diagrams, vol 2, p 1508
9. Hull D, Bacon DJ (1984) Introduction to dislocations, International series on materials science and technology, 33rd edn, vol 37. Pergamon Press, Exeter, UK