Formation of ternary carbide Fe3Mo3C by mechanical activation and subsequent heat treatment
Source abstract
Abstract
Ternary carbide, Fe3Mo3C was prepared from the powder mixture of Fe/Mo/C = 1/1/1 which was ground for 3 h in a planetary ball mill and subsequently heated at a temperature as low as 700°C, its amount increased with heating temperature. In contrast, when the 1 h-ground and unground samples were heated at 700–1000°C, Mo2C formed. From the results obtained about the effect of mixing ratio, grinding time and heating temperature of Fe/Mo/C samples on the formation of Fe3Mo3C, it was found that the formation of Fe3Mo3C strongly depends on the mixing homogeneity and the activated state of the particles of Fe, Mo and C components induced by mechanical grinding. Fe3Mo3C obtained belongs to a hard magnet, having saturation magnetization of 0.4 emu g−1, remanence of 0.13 emu g−1 and coercivity of 200 Oe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. E. Gaffet, F. Bernard, J.-C. Niepce, F Charlot, C. Gras, G. L. Caer, J.-L. Guichard, P. Delcroix, A. Mocellin and O. Tillement, J. Mater. Chem. 9 (1999) 305.10.1039/a804645j ↗
2. T. Tsuchida, T. Hasegawa and M. Inagaki, J. Amer. Ceram. Soc. 77 (1994) 3227.10.1111/j.1151-2916.1994.tb04574.x ↗
3. T. Tsuchida, T. Kitagawa and M. Inagaki, Eur. J. Solid State Inorg. Chem. 32 (1995) 629.
4. T. Tsuchida and T. Hasegawa, Thermochim. Acta. 276 (1996) 123.10.1016/0040-6031(95)02763-7 ↗
5. T. Tsuchida, T. Hasegawa, T. Kitagawa and M. Inagaki, J. Eur. Ceram. Soc. 17 (1997) 1793.10.1016/S0955-2219(97)00074-5 ↗
6. T. Tsuchida, T. Kitagawa and M. Inagaki, J. Mater. Sci. 32 (1997) 5123.10.1023/A:1018669501136 ↗
7. T. Tsuchida, M. Kawaguchi and K. Kodaira, Solid State Ionics 101–103 (1997) 149.
8. T. Tsuchida and Y. Azuma, J. Mater. Chem. 7 (1997) 2265.10.1039/a704235c ↗
9. T. Tsuchida and T. Kan, J. Eur. Ceram. Soc. 19 (1999) 1795.10.1016/S0955-2219(98)00278-7 ↗
10. S. T. Oyama, “The Chemistry of Transition Metal Carbides and Nitrides” (Blackie Academic & Professional, London, 1996) p. 1.10.1007/978-94-009-1565-7 ↗
11. L. M. Di, A. Calka, Z. L. Li and J. S. Williams, J. Appl. Phys. 78 (1995) 4118.10.1063/1.360705 ↗
12. I. Barin, “Thermochemical Data of Pure Substances” (VCH, Weinheim, Federal Republic of Germany, 1989) p. 544.