The viscoelastic behavior of β-In3Sn and the nature of the high-temperature background
Source abstract
Abstract
The damping behavior in torsion of single phase β-In3Sn has been evaluated at room temperature over a broad range of frequencies (10−4 to 103 Hz) and as a function of various mechanical and thermal treatments. The results are consistent with a model for the power-law (tan δ ∝ f −n), high-temperature-background absorption being effected by diffusional processes on grain and, particularly, on subgrain boundaries. The results are compared/contrasted with those for damping in single-phase γ-InSn4 and in the two-phase β-γ eutectic. Failure of the eutectic material to follow a composite model for damping, combined with a thermal aging effect that lowers damping only for certain frequencies, shows that the boundary-based absorption model for the high-temperature background applies, too, to phase boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. J. Zhang, R. J. Perez and C. R. Wong, Mater. Sci. Engr. 13 (1994) 325.10.1016/0927-796X(94)90010-8 ↗
2. J. Zhang, R. J. Perez and E. J. Lavernia, J. Mater. Sci. 28 (1993) 835.10.1007/BF01151266 ↗
3. M. Brodt and R. S. Lakes, J. Composite Mater. 29 (1995) 1823.10.1177/002199839502901402 ↗
4. R. S. Lakes and J. Quackenbush, Philos. Mag. Lett. 74 (1996) 227.10.1080/095008396180155 ↗
5. J. E. Bishop and V. K. Kinra, Mech. Composite Mater. Struct. 1 (1994) 75.10.1080/10759419408945822 ↗
6. C. Zener, “Elasticity and Anelasticity of Metals” (Univ. of Chicago Press, Chicago, 1948).
7. A. S. Nowick and B. S. Berry, “An elastic Relaxation in Crystalline Solids” (Academic Press, New York, 1972).
8. G. Schoeck, E. Bisogni and J. Shyne, Acta Metall. 12 (1964) 1466.10.1016/0001-6160(64)90141-5 ↗
9. W. N. Findley, J. S. Lai and K. Onaran, “Creep and Relaxation of Nonlinear Viscoelastic Materials” (North-Holland, New York, 1976).
10. T. T. Gribb and R. F. Cooper, J. Geophys. Res. 103 (1998) 27267.10.1029/98JB02786 ↗
11. E. N. DaC. Andrade, Proc. R. Soc. London A84 (1910) 1.
12. R. Raj, Metall. Trans. A 6A (1975) 1499.10.1007/BF02641961 ↗
13. F. R. N. Nabarro, in “Report of a Conference on the Strength of Solids” (Phys. Soc. London, 1948) p. 75.
14. C. Herring, J. Appl. Phys. 21 (1950) 437.10.1063/1.1699681 ↗
15. R. L. Coble, ibid. 34 (1963) 1679.10.1063/1.1702656 ↗
16. Y. Gueguen, M. Darot and P. Mazot, Phys. Earth Planet. Inter. 55 (1989) 254.10.1016/0031-9201(89)90073-3 ↗
17. G. Glover and C. M. Sellars, Metall. Trans. 4 (1973) 765.10.1007/BF02643086 ↗
18. R. J. Twiss, Pure Appl. Geophys. 115 (1977) 227.10.1007/BF01637105 ↗
19. T. S. KÊ, Phys. Rev. 71 (1947) 533.10.1103/PhysRev.71.533 ↗
20. S. C. Yan and T. S. KÊ, Phys. Stat. Solidi 104 (1987) 715.10.1002/pssa.2211040223 ↗
21. A. RiviÈre and P. Gadaud, Metall. Mater. Trans. A 28A (1997) 1661.10.1007/s11661-997-0258-4 ↗
22. Q. P. Kong, B. Cai and G. Gottstein, J. Mater. Sci. 36 (2001) 5429.10.1023/A:1012421412006 ↗
23. R. Raj and M. F. Ashby, Metall. Trans. 2 (1971) 1113.10.1007/BF02664244 ↗
24. D. S. Stone, Acta Metall. Mater. 39 (1991) 599.10.1016/0956-7151(91)90128-N ↗
25. R. Hultgren, P. D. Desai and D. T. Hawkins, “Selected Values of the Thermodynamic Properties of Binary Alloys” (American Society for Metals, Metals Park, OH, 1973).
26. M. Brodt, L. S. Cook and R. S. Lakes, Rev. Sci. Instr. 66 (1995) 5292.10.1063/1.1146101 ↗
27. C. P. Chen and R. S. Lakes, J. Rheol. 33 (1989) 1231.10.1122/1.550071 ↗
28. W. Duffy, J. Appl. Phys. 68 (1990) 5601.10.1063/1.346971 ↗
29. P. M. Buechner, D. S. Stone and R. S. Lakes, Scripta Mater. 41 (1999) 561.10.1016/S1359-6462(99)00152-9 ↗
30. R. J. Borg and G. J. Dienes, “An Introduction to Solid-State Diffusion” (Academic, Boston, 1988) p. 80.
31. H. J. Frost and M. F. Ashby, “Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics” (Pergamon, Oxford, UK, 1982) p. 32.
32. A. Kelly and G. W. Groves, “Crystallography and Crystal Defects” (Addison-Wesley, Reading, PA, 1970) p. 345.
33. Z. Hashin and S. Shtrikman, J. Mech. Phys. Solids 11 (1963) 127.10.1016/0022-5096(63)90060-7 ↗
34. R. M. Christensen, ibid. 17 (1969) 23.10.1016/0022-5096(69)90011-8 ↗
35. L. V. Gibiansky and G. W. Milton, Proc. R. Soc. London 440 (1993) 163.
36. L. Gibiansky and R. S. lakes, Mech. Mater. 16 (1993) 317.10.1016/0167-6636(93)90060-5 ↗
37. M. Brodt and R. S. Lakes, J. Mater. Sci. 31 (1996) 6577.10.1007/BF00356265 ↗
38. J. W. Morris Jr., J. L. Freer-Goldstein and Z. Mei, J. Metals 45 (1993) 25.
39. J. H. Schneibel and P. M. Hazzledine, Acta Metall. 30 (1982) 1223.10.1016/0001-6160(82)90018-9 ↗
40. J. Lu and D. C. van Aken, Metall. Mater. Trans. A 27A (1996) 2565.10.1007/BF02652350 ↗
41. M. F. Ashby, Surface Sci. 31 (1972) 498.10.1016/0039-6028(72)90273-7 ↗
42. P. H. Pumphrey, in “Grain Boundary Structure and Properties”, edited by G. A. Chadwick and D. A. Smith (Academic, London, 1976) ch. 5.