journal article·2000-12

Fabrication and mechanical properties of silicon carbide–silicon nitride nanocomposites

Young–Wook Kim, M. Mitomo

Journal of Materials Science· Volume 35· Issue 23
Publisher page

Abstract

A powder mixture of ultrafine β –SiC–35 wt% α –Si3N4 containing 6 wt% Al2O3 and 4 wt% Y2O3 as sintering additives were liquid–phase sintered at 1800°C for 30 min by hot–pressing. The hot–pressed composites were subsequently annealed at 1920°C under nitrogen–gas–pressure to enhance grain growth. The average grain–size of the sintered bodies were ranged from 96 to 251 nm for SiC and from 202 to 407 nm for Si3N4, which were much finer than those of ordinary sintered SiC–Si3N4 composites. Both strength and fracture toughness of fine–grained SiC–Si3N4 composites increased with increasing grain size. Such results suggested that a small amount of grain growth in the fine–grained region (≤250 nm for SiC and ≤400 nm for Si3N4) was beneficial for mechanical properties of the composites. The room–temperature flexural strength and fracture toughness of the 8–h annealed composites were 698 MPa and 4.7 MPa · m1/2, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. K. Niihara, J. Ceram. Soc. Jpn. 99 (1991) 974.10.2109/jcersj.99.974 ↗
2. P. D. Ownby and J. Liu, Ceram. Eng. Sci. Proc. 12 (1991) 1345.10.1002/9780470313831.ch32 ↗
3. K. Niihara and A. Nakahira, in Proceedings of the 3rd International Symposium on Ceramic Materials and Components for Engines, Las Vegas, 1988, edited by V. J. Tennery (American Ceramic Society, Westerville, 1989) p. 919.
4. T. Ohji, Y. K. Jeong, Y. H. Choa and K. Niihara, J. Am. Ceram. Soc. 81 (1998) 1453.10.1111/j.1151-2916.1998.tb02503.x ↗
5. K. Niihara, K. Izaki and A. Nakahira, J. Jpn. Soc. Powder Metall. 37 (1990) 352.10.2497/jjspm.37.352 ↗
6. K. Niihara, K. Suganuma, A. Nakahira and K. Izaki, J. Mater. Sci. Lett. 9 (1990) 598.10.1007/BF00725889 ↗
7. R. W. Davidge and G. Tappin, Proc. Brit. Ceram. Soc. 15 (1970) 47.
8. A. G. Evans and R. W. Davidge, Philos. Mag. 20 (1969) 373.10.1080/14786436908228708 ↗
9. R. W. Rice, S. W. Freiman and P. F. Becher, J. Am. Ceram. Soc. 64 (1981) 345.10.1111/j.1151-2916.1981.tb10300.x ↗
10. R. W. Rice, J. Mater. Sci. 32 (1997) 1673.10.1023/A:1018511613779 ↗
11. Y.-W. Kim, M. Mitomo and H. Hirotsuru, J. Am. Ceram. Soc. 78 (1995) 3145.10.1111/j.1151-2916.1995.tb09100.x ↗
12. M. Mitomo, Y.-W. Kim and H. Hirotsuru, J. Mater. Res. 11 (1996) 1601.10.1557/JMR.1996.0200 ↗
13. Y.-W. Kim, M. Mitomo and H. Hirotsuru, J. Am. Ceram. Soc. 80 (1997) 99.10.1111/j.1151-2916.1997.tb02796.x ↗
14. Y.-W. Kim and M. Mitomo, ibid., 82 (1999) 2731.10.1111/j.1151-2916.1999.tb02149.x ↗
15. G.-D. Zhan, M. Mitomo and Y.-W. Kim, ibid., 82 (1999) 2924.10.1111/j.1151-2916.1999.tb02181.x ↗
16. D. Shaoming, J. Dongliang, T. Shouhong and G. Jingkun, Ceram. Int. 21 (1995) 451.10.1016/0272-8842(95)94473-N ↗
17. Y. I. Lee, Y.-W. Kim, H. J. Choi and J. G. Lee, J. Kor. Ceram. Soc. 36 (1999) 799.
18. Y.-W. Kim, Y. I. Lee, M. Mitomo, H. J. Choi and J. G. Lee, J. Am. Ceram. Soc. 82 (1999) 1058.10.1111/j.1151-2916.1999.tb01873.x ↗
19. G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, ibid. 64 (1981) 533.10.1111/j.1151-2916.1981.tb10320.x ↗
20. S. Turan and K. M. Knowles, ibid. 79 (1996) 3325.10.1111/j.1151-2916.1996.tb08114.x ↗
21. M. Mitomo and S. Uenosono, ibid. 75 (1992) 103.10.1111/j.1151-2916.1992.tb05449.x ↗
22. M. Herrmann, C. Schuber, A. Rendtel and H. Hubner, ibid. 81 (1998) 1095.10.1111/j.1151-2916.1998.tb02456.x ↗
23. H. J. Park, H. E. Kim and K. Niihara, J. Eur. Ceram. Soc. 18 (1998) 907.10.1016/S0955-2219(97)00180-5 ↗
24. R. W. Rice, S. W. Freiman and P. F. Becher, J. Am. Ceram. Soc. 64 (1981) 350.10.1111/j.1151-2916.1981.tb10301.x ↗
25. Y.-W. Kim, M. Mitomo, H. Emoto and J. G. Lee, ibid. 81 (1998) 3136.10.1111/j.1151-2916.1998.tb02748.x ↗
26. D. H. Cho, Y.-W. Kim and W. J. Kim, J. Mater. Sci. 32 (1997) 4777.10.1023/A:1018635131661 ↗
27. H. Sato, M. Mitomo, T. Nishimura and H. Emoto, J. Ceram. Soc. Jpn. 106 (1998) 203.10.2109/jcersj.106.203 ↗