Morphology and fracture behavior in aliphatic polyketones
Source abstract
Abstract
Morphological features and fracture mechanisms in aliphatic polyketone (PK) samples, prepared via compression molding and injection molding processes, were investigated using differential scanning calorimetry, dynamic mechanical spectroscopy, transmitted optical microscopy and transmission electron microscopy techniques. The PK samples studied are found to have a crystallinity of about 38%. The fracture mechanisms observed in the PK samples are found to be sensitive to strain rate, notch, and stress state. Upon double-notch four-point-bend fracture, the PK fails in a brittle fashion under impact condition and fails in a ductile manner when the testing rate is low. Crazing is the dominant fracture mechanism under the low-rate test conditions, even in the region close to the surface (plane stress region) of the sample. The dominant fracture mechanisms under uniaxial tension are found to be shear yielding and voiding due to debonding of the less-compliant sub-micrometer particles in the PK matrix. No sign of crazing is observed in uniaxial tensile specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Polymer crystallization and properties · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. E. Drent, U.S. Patent 4.835.250 (1989).
2. R. L. Danforth, J. M. Machado and J. C. M. Jordaan, in Proceedings of the 53rd Society of Plastics Engineers Annual Technical Conference (ANTEC), Boston, May 1995, p. 2316.
3. C. E. Ash, D. G. Waters and A. A. Smaardijk, in Proceedings of the 53rd Society of Plastics Engineers Annual Technical Conference (ANTEC), Boston, May 1995, p. 2319.
4. J. E. Flood, D. H. Weinkauf and M. Londa, in Proceedings of the 53rd Society of Plastics Engineers Annual Technical Conference (ANTEC), Boston, May 1995, p. 2326.
5. A. F. Yee and R. A. Pearson, J. Mater. Sci. 21 (1986) 2462.10.1007/BF01114293 ↗
6. R. A. Pearson and A. F. Yee,J. Mater. Sci. 21 (1986) 2475.10.1007/BF01114294 ↗
7. R. A. Pearson and A. F. Yee,J. Mater. Sci. 24 (1989) 2571.10.1007/BF01174528 ↗
8. H.-J. Sue, R. A. Pearson and A. F. Yee, in Proceedings of AICHE 2nd Topical Conference, San Francisco, November 1989.
9. D. S. Parker, H.-J. Sue, J. Huang and A. F. Yee, Polymer 31 (1990) 2267.10.1016/0032-3861(90)90312-M ↗
10. C. B. Bucknall, “Toughened Plastics” (Appli. Sci. Pub. Ltd., London, 1977) p. 195.10.1007/978-94-017-5349-4 ↗
11. W. Bascom, R. Ting, R. J. Moulton, C. K. Riew and A. R. Siebert, J. Mater. Sci. 16 (1981) 2657.10.1007/BF02402827 ↗
12. J. Sultan and F. McGarry, Polym. Eng. Sci. 13 (1973) 19.10.1002/pen.760130105 ↗
13. S. Kunz-douglass, P. W. R. Beaumont and M. F. Ashby, J. Mater. Sci. 15 (1980) 1109.10.1007/BF00551799 ↗
14. S. Wu, Polymer 26 (1985) 1855.10.1016/0032-3861(85)90015-1 ↗
15. A. G. Evans, Z. B. Ahmad, D. G. Gilbert and P. W. R. Beaumont, Acta Metall. 34 (1986) 79.10.1016/0001-6160(86)90234-8 ↗
16. A. J. Kinloch, S. J. Shaw, D. A. Tod and D. L. Hunston, Polymer 24 (1983) 1341.10.1016/0032-3861(83)90070-8 ↗
17. R. J. M. Borggreve, R. J. Gaymans, J. Schuijer and J. F. Ingen Housz, ibid. 28 (1987) 489.10.1016/0032-3861(87)90204-7 ↗
18. H. Breuer, F. Haaf and J. Stabenow, J. Macromol. Sci.-Phys. B14(3) (1977) 387.10.1080/00222347708212908 ↗
19. F. J. Guild and R. J. Young, J. Mater. Sci. 24 (1989) 2454.10.1007/BF01174511 ↗
20. S. Y. Hobbs and M. E. J. Dekkers, ibid. 24 (1989) 1316.10.1007/PL00020214 ↗
21. H.-J. Sue and A. F. Yee, J. Mater. Sci. 24 (1989) 1447.10.1007/BF02397085 ↗
22. H.-J. Sue and A. F. Yee, J. Mater. Sci 26 (1991) 3449.10.1007/BF00557130 ↗
23. H.-J. Sue, Ph.D. thesis, The University of Michigan, Ann Arbor, Michigan, 1988.
24. H.-J. Sue, Polym. Eng. Sci. 31 (1991) 275.10.1002/pen.760310411 ↗
25. H.-J. Sue and A. F. Yee, J. Mater. Sci. 28 (1993) 2915.10.1007/BF00354694 ↗
26. H.-J. Sue, R. A. Pearson, D. S. Parker, J. Huang and A. F. Yee, Polym. Prepr. 29 (1988) 147.
27. A. S. Holik, R. P. Kambour, S. Y. Hobbs and D. G. Fink, Microstruct. Sci. 7 (1979) 357.
28. B. Wunderlich, “Macromolecular Physics,” Vol. 3 (Academic Press, London, 1980), p. 30.
29. J. Lu, B. Zhao and H.-J. Sue, in Proceedings of the 57th Society of Plastics Engineers Annual Technical Conference (ANTEC), New York, May 1999.
30. H. Nakayasu, H. Markovitz and D. Plazek, Trans. Soc. Rheol. 5 (1961) 261.10.1122/1.548899 ↗
31. I. M. Ward and D. W. Hadley, “An Introduction to the Mechanical Properties of Solid Polymers” (John Wiley &Sons Ltd., New York, 1993), p. 187.
32. C. Xiao and A. F. Yee, Macromolecules 25 (1992) 6800.10.1021/ma00051a012 ↗
33. N. G. McCrum, B. E. Reed and G. Williams, “Anelastic and Dielectric Effects in Polymeric Solids” (JohnWiley&Sons Ltd., London, 1967).
34. L. E. Nielsen, “Mechanical Properties of Polymers” (Reinhold, New York, 1962).
35. H.-J. Sue, P. C. Yang, E. I. Garcia-meitin and M. T. Bishop, J. Mater. Sci. Letters 12 (1993) 1463.10.1007/BF00591609 ↗