journal article·2000-06

Simultaneous improvement of the strength and fracture toughness of MgO-Al2O3-SiO2 glass/Mo composites by the microdispersion of flaky Mo particles

Y. Waku, M. Suzuki, Y. Oda, Y. Kohtoku

Journal of Materials Science· Volume 35· Issue 12
Publisher page

Abstract

The effect of shape and volume percent of Mo particles on theflexural strength and fracture toughness of MgO-Al2O3-SiO2(MAS) glass/Mo composites was investigated. The flexural strengthand fracture toughness of composites depends heavily on Mo particleshapes, and there is greater improvement in composites reinforcedwith flaky rather than massive Mo particles. In the compositesreinforced with flaky Mo particles, fracture toughness increases withvolume percent of Mo and, at 50 vol% Mo, is 11.6 MPa√m,which is approximately 6.7 times higher than that of the matrix. Increases in fracture toughness of composites reinforced with flakyMo particles is greater than with SiC whiskers, SiC platelets, SiC particles or ZrO2 particles. Fabricating composites reinforcedwith flaky Mo particles is an effective toughening technique capableof simultaneously improving the strength and toughness of brittlematerials, such as monolithic Al2O3 and MAS glass, by utilizing plastic deformation of ductile phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Fatigue and fracture mechanics · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. A. A. Griffith, Phil. Trans. R. Soc. A221 (1920) 163.
2. G. Schneider, K.-L. Weisskopf, P. Greil and G. Petzow, Sci. Ceram. 14 (1988) 819.
3. M. Ashizuka and M. Kamiyoshikawa, J. Ceram. Soc. Jpn. 100 (1989) 541.10.2109/jcersj.100.541 ↗
4. I. Wadsworth and R. Stevens, J. Mater. Sci. 26 (1991) 6800.10.1007/BF02402676 ↗
5. Wolfgang Semar and Wolfgang Pannhorst, Silicates Industrials 3/4 (1991) 71.
6. Y. Waku, M. Suzuki, Y. Oda and Y. Kohtoku, J. Ceram. Soc. Japan 103 (1995) 713.10.2109/jcersj.103.713 ↗
7. M. Suzuki, Y. Oda and Y. Kohtoku Idem., Metall. Mater. Trans. 27A (1996) 3307.10.1007/BF02663880 ↗
8. Y. Waku and M. Suzuki, J. Jpn. Soc. Powder Powder Metall. 43 (1996) 705.10.2497/jjspm.43.705 ↗
9. Y. Waku, M. Suzuki, Y. Oda and Y. Kohtoku J. Mater. Sci. 32 (1997) 4549.10.1023/A:1018673318032 ↗
10. H. Awaji and Y. Sakaido, J. Amer. Ceram. Soc. 73 (1990) 3522.10.1111/j.1151-2916.1990.tb06490.x ↗
11. R. L. Fullman, Trans. AIME 197 (1953) 447.
12. K. S. Chan, Met. Trans. 23A (1992) 183.10.1007/BF02660864 ↗
13. J. W. Hutchinson, J. Mech. Phys. Solids 16 (1968) 13.10.1016/0022-5096(68)90014-8 ↗
14. J. R. Rice and G. R. Rosengren, ibid. 16 (1968) 1.10.1016/0022-5096(68)90013-6 ↗