journal article·2004-04

Performance characteristics of compatibilized ternary Nylon 6/ABS/LCP in-situ composites

S. C. Tjong, W. Jiang

Journal of Materials Science· Volume 39· Issue 8
Publisher page

Abstract

Ternary Nylon 6/poly(acrylonitrile-butadiene-styrene)(ABS)/liquid crystalline polymer (LCP) blends compatibilized by the maleic anhydride-grafted polypropylene (MAP) and solid epoxy resin (bisphenol type-A) were injection molded. Thermoplastic matrix consisting of Nylon 6/ABS (60/40) (wt%) was melt blended with various LCP (Vectra A950) contents. The effects of compatibilizer additions on the structure-mechanical property relationship of the in-situ composites reinforced with LCP were investigated. SEM observation revealed that the additions of epoxy and MAP compatibilizers to the Nylon 6/ABS/LCP blend were very effective to enhance the interfacial adhesion of its phase components. Consequently, extended long and fine LCP fibrils were formed in the skin section of in-situ composites. Tensile measurements revealed that uncompatibilized Nylon 6/ABS/LCP blend exhibited lower strength, stiffness and impact toughness. However, the incorporation of MAP and epoxy resin compatibilizers into Nylon 6/ABS/LCP blend improved its tensile strength, stiffness and impact toughness considerably. This was due to the compatibilizers effectively promoted stress transfer at the interfacial phase regions of ternary in-situ composites. The compatibilized composites exhibited mechanical anisotropy, especially for the tensile strength. Thermogravimetric measurements showed that the heat resistance and heat stability of the in-situ composites tended to increase with increasing LCP content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. S. C. Tjong Mater. Sci. Eng. R: Reports 41 (2003) 1.10.1016/S0927-796X(03)00035-4 ↗
2. R. A. Kudva, H. Keskkula and D. R. Paul Polymer 41 (2000) 239.10.1016/S0032-3861(99)00106-8 ↗
3. H. KESKKULA and D. R. Paul Polymer 41 (2000) 335.10.1016/S0032-3861(99)00244-X ↗
4. H. KESKKULA and D. R. Paul Polymer 39 (1998) 2447.10.1016/S0032-3861(97)00583-1 ↗
5. V. J. Triacca, S. Ziaee, W. Barlow, H. Keskkula and D. R. Paul ibid. 32 (1991) 1401.10.1016/0032-3861(91)90420-N ↗
6. Y. Aoki and M. Watanabe Polym. Engng. Sci. 32 (1992) 878.10.1002/pen.760321307 ↗
7. A. Misra, G. Sawhney and R. A. Kumar J. Appl. Polym. Sci. 50 (1993) 1179.10.1002/app.1993.070500708 ↗
8. B. Majumdar, H. Keskkula and D. R. Paul Polymer 35 (1994) 3164.10.1016/0032-3861(94)90117-1 ↗
9. H. KESKKULA and D. R. Paul Polymer 35 (1994) 5453.10.1016/S0032-3861(05)80009-6 ↗
10. T. Limtasiri and A. L. Isayev J. Appl. Polym. Sci. 42 (1991) 2923.10.1002/app.1991.070421109 ↗
11. R. M. Holsti-Miettinen, M. T. Heino and J. V. Seppala ibid. 57 (1995) 573.10.1002/app.1995.070570507 ↗
12. F. P. La Mantia, R. Scaffaro, P. L. Magagnini, M. Paci, C. Chiezzi, L. Sek, L. I. Minkova and T. Miteva Polym. Eng. Sci. 37 (1997) 1164.10.1002/pen.11760 ↗
13. S. C. Tjong and Y. Z. Meng Polymer 38 (1997) 4609.10.1016/S0032-3861(96)01082-8 ↗
14. Y. Z. Meng and S. C. Tjong ibid. 39 (1998) 99.10.1016/S0032-3861(97)00218-8 ↗
15. Y. Z. Meng, S. C. Tjong and A. S. Hay ibid. 38 (1998) 1845.10.1016/S0032-3861(97)00485-0 ↗
16. S. C. Wong, Y. W. Mai and Y. Leng Polym. Eng. Sci. 38 (1998) 156.10.1002/pen.10176 ↗
17. H. Chih, K. Chiou and F. Chang J. Appl. Polym. Sci. 60 (1996) 2503.10.1002/(SICI)1097-4628(19960627)60:13<2503::AID-APP21>3.0.CO;2-3 ↗
18. S. C. Tjong and W. Jiang ibid. 74 (1999) 2274.10.1002/(SICI)1097-4628(19991128)74:9<2274::AID-APP17>3.0.CO;2-1 ↗
19. Y. Seo, B. Kim, S. Kwak, K. U. Kim and J. Kim Polymer 40 (1999) 4441.10.1016/S0032-3861(98)00685-5 ↗
20. H. J. Donnell and D. G. Baird ibid. 36 (1995) 3113.10.1016/0032-3861(95)97874-F ↗
21. A. Datta and D. G. Baird ibid. 36 (1995) 505.10.1016/0032-3861(95)91559-P ↗
22. R. E. Bretas and D. G. Baird ibid. 33 (1992) 5233.10.1016/0032-3861(92)90806-8 ↗
23. S. K. Kwon and I. Chung Polym. Eng. Sci. 35 (1995) 1137.10.1002/pen.760351403 ↗
24. G. Sawhney, S. K. Gupta and A. Misra J. Appl. Polym. Sci. 62 (1996) 1395.10.1002/(SICI)1097-4628(19961128)62:9<1395::AID-APP9>3.0.CO;2-C ↗
25. S. Joslin, W. Jackson and R. Farris ibid. 54 (1994) 439.10.1002/app.1994.070540404 ↗
26. L. Carpaneto, G. Lesage, R. Pisino and V. Trefiletti Polymer 40 (1999) 1781.10.1016/S0032-3861(98)00407-8 ↗
27. R. K. Li, S. C. Tjong and X. L. Xie J. Polym. Sci. B, Phys. Ed. 38 (2000) 403.10.1002/(SICI)1099-0488(20000201)38:3<403::AID-POLB7>3.0.CO;2-6 ↗
28. S. C. Tjong and Y. Z. Meng J. Appl. Polym. Sci. 74 (1999) 1827.10.1002/(SICI)1097-4628(19991114)74:7<1827::AID-APP27>3.0.CO;2-M ↗
29. M. L. Shiao, S. V. Nair, P. D. Garrett and R. E. Pollard Polymer 35 (1994) 306.10.1016/0032-3861(94)90695-5 ↗
30. J. C. Halpin and J. L. Kardos Polym. Eng. Sci. 16 (1976) 344.10.1002/pen.760160512 ↗
31. L. E. Nielsen, “Mechanical Properties of Polymer and Composites” (Marcel Dekker, New York, 1974).
32. G. Crevecoeur and G. Groeninckx Polym. Eng. Sci. 30 (1990) 532.10.1002/pen.760300906 ↗
33. S. C. Tjong, S. L. Liu and R. K. Li J. Mater. Sci. 32 (1997) 2163.10.1023/A:1018543310086 ↗
34. C. Carrot, M. Jaziri, J. Guillet and J. F. May Plas. Rubb. Process. Appl. 14 (1990) 245.
35. A. Cecere, R. Greco, G. Ragosta, G. Scarinzi and A. Taglialatela Polymer 31 (1990) 1239.10.1016/0032-3861(90)90214-J ↗
36. Y. Seo, S. S. Hwang, K. U. Kim, J. Lee and S. I. Hong ibid. 34 (1993) 1667.10.1016/0032-3861(93)90326-6 ↗
37. C. C. Huang and F. C. Chang ibid. 38 (1997) 2135.10.1016/S0032-3861(96)00740-9 ↗