journal article·2003-04

Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites

S. Jayalakshmi, S. V. Kailas, S. Seshan

Journal of Materials Science· Volume 38· Issue 7
Publisher page

Abstract

Magnesium alloys are very suitable for applications that require materials with high strength-to-weight ratio. However, the use of magnesium alloys is limited due to their low elevated temperature properties. Magnesium matrix composites are the possible alternatives. The present work involved the production and subsequent property evaluation of AM100 magnesium alloy and its alumina short fibre reinforced composites. Studies on microstructure, hardness, density, stiffness, tensile properties, impact strength, wear resistance and corrosion resistance were carried out. Results indicate the significant improvement in the properties achieved by making composites. The findings also highlight the dominant roles of the base alloy matrix and the fibre volume fraction in determining the above properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Material Properties and Applications · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. N. C. Spare, Proc. of London Conference, Nov 1986, p. 101.
2. A. Luo and M. O. Perquleryuz, J. Mater. Sci. 29 (1994) 5259.10.1007/BF01171534 ↗
3. E. F. Emley, in “Principles of Magnesium Technology” (Pergamon Press, London, 1966).
4. A. A. Das and S. Chatterjee, The Metall. & Mat. Tech. (1981) 137.
5. P. K. Rohatgi, R. Asthana and S. Das, Intl. Metals Rev. 31(3) (1986) 115.
6. T. W. Chou, A. Kelly and A. Okura, Composites 16 (1985) 187.10.1016/0010-4361(85)90603-2 ↗
7. M. J. Dellis, J. P. Keustermans and F. Delannay, Mat. Sci. & Eng. A 135 (1991) 253.10.1016/0921-5093(91)90572-5 ↗
8. G. A. Chadwick, ibid. 135 (1991) 23.10.1016/0921-5093(91)90530-Z ↗
9. H. Hu, J. Mater. Sci. 33 (1998) 1579.10.1023/A:1017567821209 ↗
10. “Recommended Practices for Sand Casting of Aluminium & Magnesium Alloys,” 2nd ed. (American Foundryman Society, Des Plaines, IL, 1965).
11. “Standard Practice for Operating Standard Salt Spray (fog) Apparatus,” ASTM B 117, 1994.
12. K. Purazrang, K. U. Kainer and B. L. Mordike, Composites 22(6) (1991) 456.10.1016/0010-4361(91)90205-U ↗
13. S. Jayalakshmi, Satish V. Kailas and S. Seshan, Composites A, in press.
14. R. J. Arsenault and R. M. Fishcer, Scripta Metall. 17 (1983) 67.10.1016/0036-9748(83)90072-8 ↗
15. S. Suresh, T. Christman and Y. Sugimura, ibid. 23 (1989) 1599.10.1016/0036-9748(89)90136-1 ↗
16. T. Christman and S. Suresh, Acta Metall. 36 (1988) 1691.10.1016/0001-6160(88)90236-2 ↗
17. S. J. Harris, Mat. Sci. & Tech. 4 (1988) 231.10.1179/mst.1988.4.3.231 ↗
18. C. M. Friend, Scripta Metall. 23 (1989) 33.10.1016/0036-9748(89)90088-4 ↗
19. A. G. Metcalfe, in “Interfaces in Metal Matrix Composites,” Vol. 1, edited by. L. J. Broutman and Richard H. Brook (Academic Press, New York, 1974), ch. 1.
20. T. Lim, Y. H. Kim, C. S. Lee and K. S. Han, J. Comp. Mat. 26(7) (1992) 1062.10.1177/002199839202600707 ↗
21. George E. Dieter, in “Mechanical Metallurgy,” Metric Edition, Material Science and Metallurgy (McGraw Hill, 1988).
22. T. Lim, S. Y. Lee and K. S. Han, in Proc. Amer. Soc. Comp. Ohio, June 1989, p. 84.
23. I. M. Hutchings, Mat. Sci. & Tech. 10 (1994) 513.10.1179/mst.1994.10.6.513 ↗
24. O. Lunder, J. E. Lein, T. Kr. Aune and K. Nisancioglu, Corrosion 45(9) (1989) 741.10.5006/1.3585029 ↗
25. G. L. Song and A. Atrens, Adv. Eng. Mat. 1(1) (1999) 11.10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗