Joining of SiC fibre reinforced borosilicate glass matrix composites to molybdenum by metal and silicate brazing
Source abstract
Abstract
The brazing of SiC fibre reinforced borosilicate glass matrix composites with Mo plates has been investigated. Molybdenum was chosen as the metallic partner under consideration of system requirements, e.g. thermomechanical stability at temperatures of interest (500–750∘C), and physical properties, e.g. coefficient of thermal expansion close to that of the glass matrix composite. Two brazing filler materials were investigated: a glass braze (Schott G018-174) and an active filler metal (Incusil ABA, brazing temperature = 740∘C). When using the glass braze the surface of the metal had to be roughened to ensure a bond of significant strength. Vacuum brazing with the active filler metal resulted in joints with high strength, which allows to fully utilise the mechanical competence of the glass matrix composite when the joint configuration is adapted to the relevant loading conditions. A novel design of a tool for hot glassware handling, made of glass matrix composite/Mo joints, is presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. M. PREWO, The Development of Fibre Reinforced Glasses and Glass-Ceramics, in “Mat. Sci. Research Vol. 20: Tailoring Multiphase and Composite Ceramics,” edited by R. E. Tressler, G. Messing, C. Pantano and R. Newnham (Plenum Press, New York, 1986) p. 529.10.1007/978-1-4613-2233-7_43 ↗
2. R. D. RAWLINGS, Composites 25 (1994) 372.10.1016/S0010-4361(94)80007-3 ↗
3. I. W. DONALD, Key Eng. Mat. 108–110 (1995) 123.10.4028/www.scientific.net/KEM.108-110.123 ↗
4. H. KUCKERT, G. WAGNER, U. SCHLICKER, E. ROEDER and E. EIFLER, Simulation and Reduction of Residual Stresses in Ultrasonically Welded Glass/Metal Joints, in “Proc. 5th ESG Conference: Glass Science and Technology for the 21st Century,” edited by A. Helebrant, M. Maryska and S. Kasa (Czech Glass Society, Prague, 1999) p. C2–72.
5. A. R. BOCCACCINI and R. D. RAWLINGS, Glass Technol. 43C (2002) 191.
6. H. L. NING. Z. T. GENG, J. S. MA, F. X. HUANG, Z. Y. QIAN and Z. D. HAN, Ceram. Int. 29 (2003) 689.10.1016/S0272-8842(02)00218-3 ↗
7. R. ARROYAVE and T. W. EAGAR, Acta Mat. 51 (2003) 4871.10.1016/S1359-6454(03)00330-6 ↗
8. S. Y. CHANG, Y. T. HUNG and T. H. CHUANG, J. Mater. Eng. Perform. 12 (2003) 123.10.1361/105994903770343240 ↗
9. A. GUEDES, A. M. P. PINTO, M. VIEIRA and F. VIANA, Mater. Sci. Eng. A 301 (2001) 118.10.1016/S0921-5093(00)01804-9 ↗
10. S. D. PETEVES and M. G. NICHOLAS, J. Am. Ceram. Soc. 79 (1996) 1553.10.1111/j.1151-2916.1996.tb08764.x ↗
11. W. TILLMANN, E. LUGSCHEIDER, R. XU and J. E. INDACOCHEA, J. Mater. Sci. 31 (1996) 445.10.1007/BF01139163 ↗
12. B. WIELAGE, F. HARTUNG, D. ASHOFF and M. TÜRPE, Metall 45 (1991) 454.
13. J. D. CAWLEY, Ceram. Bull. 68 (1989) 1619.
14. M. SINGH, Key Eng. Mater. 164(1) (1999) 415.
15. M. FERRARIS, C. BADINI, M. MONTORSI, P. APPENDINO and H. W. SCHOLZ, J. Nucl. Mater. 215 (1994) 1613.10.1016/0022-3115(94)91100-2 ↗
16. M. SINGH and E. LARA-CURZIO, J. Eng. Gas Turbines Power, Trans. ASME 123(2) (2001) 288.10.1115/1.1362664 ↗
17. J. J. ZHANG, S. J. LI, H. P. DUAN and Y. ZHANG, Rare Metal Mater. Eng. 31(Suppl 1) (2002) 393.
18. M. NAKAMURA, M. MABUCHI, N. SAITO, Y. YAMADA, M. NAKANISHI, K. SHIMOJIMA and I. SHIGEMATSU, Key Eng. Mater. 164(1) (1999) 435.
19. D. G. DIXON, J. Mater. Sci. 30 (1995) 1539.10.1007/BF00375261 ↗
20. R. A. HABER and V. A. GREENHUT, Aluminum/alumina Joining in Proc. Metal-Ceramic Joining Symp. (TMS Fall Meeting, Warrendale, USA 1991) 119.
21. K. SAKATA, K. OGAWA, K. HOMMA and K. NLL, ISIJ-Int. 30 (1990) 1124.10.2355/isijinternational.30.1124 ↗
22. S. WEIL, G. YANG and M. PAXTON DEAN, Joining of Mixed-Conducting Oxides to Heat Resistant Metals, in Proc. of Joining of Advanced and Specialty Materials, ASM, USA (2001) 69.
23. W. BEIER, J. HEINZ and W. PANNHORST, VDI Berichte Nr. 1021 (1993) 255.
24. W. PANNHORST, M. SPALLEK, R. BRÜCKNER, H. HEGELER, C. REICH, G. GRATHWOHL, B. MEIER and D. SPELMANN, Ceram. Eng. Sci. Proc. 11(7–8) (1990) 947.10.1002/9780470313008.ch29 ↗
25. A. R. BOCCACCINI, H. KERN, J. JANCZAK-RUSCH, C. B. PONTON and K. K. CHAWLA, Key Eng. Mat. 164/165 (1999) 345.10.4028/www.scientific.net/KEM.164-165.345 ↗
26. A. R. BOCCACCINI, A. STRUTT, K. S. VECCHIO, D. MENDOZA, K. K. CHAWLA, C. B. PONTON and D. H. PEARCE, Composites Part A 29 (1998) 1343.10.1016/S1359-835X(98)00063-3 ↗