Spectroscopic adsorption and effective dosage in accelerated weathering of a polyester-urethane coating
Source abstract
Abstract
Topcoat integrity is a crucial property for a protective coating system for protecting metal substrates in conjunction with anti-corrosion primers. Infrared spectroscopy was used to examine the chemical changes seen during accelerated weathering in a model topcoat urethane polymer and to measure the coating ablation. During weathering the ultraviolet absorbance of the urethane coating showed a typical tail (yellowing) into the visible region that increased with exposure period. Effective ultraviolet dosage can be calculated by integrating the spectrum of the incident radiation with the quantum yield for the degradation process and the ultraviolet absorption of the material under investigation. Depending on the form of the quantum yield, there is a clear acceleration of the absorption of damaging radiation because the absorbance increases with exposure. This non-linear relationship offers possibilities on how to estimate a service lifetime; one could choose a value of the exposure period characteristic of the start of the acceleration in dosage, or one might choose the asymptote at which the dosage rate becomes very great. The ultraviolet tailing into the visible region is analyzed as an example of an “Urbach” tail which is usually attributed to structural disorder that introduces energy levels between the principle electronic states.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Polymer crystallization and properties · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. G. P. BIERWAGEN and D. E. TALLMAN, Prog. Org. Coatings 41 (2001) 201.10.1016/S0300-9440(01)00131-X ↗
2. C. WILHELM and J.-L. GARDETTE, Polymer 39(24) (1998) 5973.10.1016/S0032-3861(97)10065-9 ↗
3. C. WILHELM, A. RIVATON and J.-L. GARDETTE, ibid. 39(5) (1998) 1223.10.1016/S0032-3861(97)00353-4 ↗
4. F. X. PERRIN, M. IRIGOYEN, E. ARAGON and J. L. VERNET, Polym. Deg. Stab. 70 (2000) 469.10.1016/S0141-3910(00)00143-9 ↗
5. J. L. GERLOCK, C. A. SMITH, V. A. COOPER, T. G. DUSBIBER and W. H. WEBER, ibid. 62 (1998) 225.10.1016/S0141-3910(97)00279-6 ↗
6. H. KIM and M. W. URBAN, Langmuir 16 (2000) 5382.10.1021/la990619i ↗
7. M. HORÁK and A. VÍTEK, “Interpretation and Processing of Vibrational Spectra” (John Wiley, New York, NY, 1978).
8. J. W. MARTIN, Prog. Org. Coatings 23 (1993) 49.10.1016/0033-0655(93)80004-T ↗
9. L. G. J. VAN DER VEN and P. J. A. GUERINK, J. Oil and Colour Chemists Assoc. 74(11) (1991) 401.
10. S. G. CROLL, in 2nd International Conference on Methodologies and Meterologies for Service Life Prediction, Monterey, California, November 1999.
11. G. WYPCH, “Handbook of Material Weathering, ” 2nd ed. (ChemTec Publishing, Toronto, Ontario, Canada, 1995).
12. S. B. MAEROV, J. Polym. Sci: A 3 (1965) 487.
13. S. M. COHEN, R. H. YOUNG and A. H. MARKHART, J. Polym. Sci: A-1 9 (1971) 3263.10.1002/pol.1971.150091115 ↗
14. A. RIVATON, F. SERRE and J. L. GARDETTE, Polym. Deg. Stab. 62 (1998) 127.10.1016/S0141-3910(97)00271-1 ↗
15. N. S. ALLEN, M. EDGE, M. RODRIGUEZ, C. M. LIAUW and E. FONTAN, ibid. 71 (2001) 1.10.1016/S0141-3910(00)00111-7 ↗
16. P. K. DAS, P. J. DESLAURIERS, D. R. FAHEY, F. K. WOOD and F. J. CORNFORTH, ibid. 48 (1995) 11.10.1016/0141-3910(95)00033-I ↗
17. D. R. BAUER, M. C. PAPUTA PECK and R. O. CARTER I I I, J. Coatings Tech. 59(755) (1987) 103.
18. B. SMITH, “Infrared Spectral Interpretation, A Systematic Approach” (CRC Press, New York, NY, 1999).
19. R. S. DAVIDSON, J. Photochemistry and Photobiology B 33 (1996) 3.10.1016/1011-1344(95)07262-4 ↗
20. H. H. JAFFÉ and M. ORCHIN, “Theory and Applications of Ultraviolet Spectroscopy” (John Wiley, New York, NY, 1965).
21. G. A. N. CONNELL, in “Topics in Applied Physics” Vol. 36, edited by M. H. Brodsky (Springer-Verlag, New York, NY, 1985).
22. O. C. MULLINS and Y. ZHU, Appl. Spectroscopy 46(2) (1992) 354.10.1366/0003702924125393 ↗
23. S. K. O'LEARY, S. R. JOHNSON and P. K. LIM, J. Appl. Phys. 82 (1997) 3334.10.1063/1.365643 ↗
24. R. MISHRA, S. P. TRIPATHY, D. SINHA, K. K. DWIVEDI, S. GHOSH, D. T. KHATHING, M. MÜLLER, D. FINK and W. H. CHUNG, Nucl. Inst. Meth. Phys. Res. B 168 (2000) 59.10.1016/S0168-583X(99)00829-0 ↗
25. S. JOHN, M. Y. CHOU, M. H. COHEN and C. M. SOUKOULIS, Phys. Rev. B 37(12) (1988) 6963.10.1103/PhysRevB.37.6963 ↗
26. J. TAUC, R. GRIGOROVICH and V. VANCU, Phys. Stat. Sol. 15 (1966) 627.10.1002/pssb.19660150224 ↗
27. S. GUPTA, D. CHOUDHARY and A. SARMA, J. Polym. Sci: B 38 (2000) 1589.10.1002/(SICI)1099-0488(20000615)38:12<1589::AID-POLB30>3.0.CO;2-K ↗
28. N. S. ALLEN, P. J. ROBINSON, N. J. WHITE and D. W. SWALES, Polym. Deg. Stab. 19 (1987) 147.10.1016/0141-3910(87)90073-5 ↗
29. A. RIVATON, F. SERRE and J. L. GARDETTE, ibid. 62 (1988) 1270.10.1016/S0141-3910(97)00271-1 ↗
30. D. R. BAUER, ibid. 69 (2000) 307.10.1016/S0141-3910(00)00074-4 ↗
31. Z. W. WICKS, F. N. JONES and S. P. PAPPAS, “Organic Coatings: Science and Technology, ” 2nd ed. (JohnWiley, NewYork, 1994).