Elastic constants of porous silver compacts after acid assisted consolidation at room temperature
Source abstract
Abstract
Acid assisted consolidation (AAC) is a technique that provides elevatedlevels of cohesiveness to silver powder compacts without recourse to a high temperature treatment. Ultrasonic techniques were used to measure the elastic constants of high purity silver compacts as a function of several processing variables. The elastic moduli of untreated (NT) samples were found to be significantly lower than those of samples that had undergone AAC and compacted at the same pressure. Post compaction sintering increases the elastic constants of both AAC and NT samples. The results indicate that the elastic constants are dependent not only on the density that was attained but also on the processing route that was followed. The elastic constant of a porous metal, M, can be expressed as M = M 0 gϕ, where M 0 is the elastic modulus of the bulk metal, g is a geometrical factor that reflects the interparticle contact area and ϕ is a quality factor that depends on the nature of the interparticle interfaces. The results suggest that sound wave velocity is a parameter more appropriate than density for predicting the elastic moduli of porous metallic compacts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M. P. Dariel, D. S. Lashmore and M. Ratzker, Dental Mater.11 (1995) 208.10.1016/0109-5641(95)80020-4 ↗
2. M. P. Dariel, U. Admon, D. S. Lashmore, M. Ratzker, A. Giuseppetti and F. C. Eichmiller, J. Mater. Res. 19(3) (1995) 505.10.1557/JMR.1995.0505 ↗
3. M. P. Dariel, M. Ratzker, D. S. Lashmore and P. Bennett, in Proceedings of the Second Pacific Rim International Conference on Advanced Materials and Processing, edited by K. S. Shin, J. K. Yoon and S. J. Kim (The Korean Institute of Metals and Materials, Korea, June 1995) p. 377.
4. M. P. Dariel, M. Ratzker and F. C. Eichmiller, J. Mater Sci. 34 (1999) 2601.10.1023/A:1004652716470 ↗
5. F. P. Knudsen, J. Am. Ceram. Soc. 42 (1959) 376.10.1111/j.1151-2916.1959.tb13596.x ↗
6. J. C. Wang, J. Mater. Sci. 19 (1984) 801.10.1007/BF00540451 ↗
7. Idem., ibid. 19 (1984) 809.10.1002/crat.2170190613 ↗
8. J. P. Panakkal, H. Willems and W. Arnold, J. Mater. Sci. 25 (1990) 1397.10.1007/BF00585456 ↗
9. E. A. Dean and J. A. Lopez, J. Am. Ceram. Soc. 66(5) (1985) 366.10.1111/j.1151-2916.1983.tb10051.x ↗
10. K. K. Phani and S. K. Niyogi, ibid. 70(12) (1987) C-362.10.1111/j.1151-2916.1987.tb04920.x ↗
11. J. R. Moon, Powder Metall. 32(1) (1989) 47.10.1179/pom.1989.32.1.47 ↗
12. O. Yeheskel and O. Tevet, J. Am. Ceram. Soc. 82(1) (1999) 136.10.1111/j.1151-2916.1999.tb01733.x ↗
13. Standard practice for measuring ultrasonic velocity in materials, ASTM designation E 494-95, March 1995.
14. H. M. Ledbetter, N. V. Frederick and M. W. Austin, J. Appl. Phys. 51(1) (1980) 305.10.1063/1.327371 ↗
15. S. P. Timoshenko and J. N. Goodier, “Theory of Elasticity,” International student ed. (McGraw-Hill, New York) (1970) p. 485.
16. JCPDS, Powder Diffraction File, X-ray Card # 4-0783.
17. O. L. Anderson, in “Physical Acoustics,” Vol. III, Part B, edited by W. P. Mason (Academic Press, New York, 1965) p. 43.
18. H. Ledbetter, in “Dynamic Elastic Modulus Measurements in Materials,” edited by A. Wolfeneden (STP 1045, ASTM, 1990) p. 143.
19. R. M. German, “Powder Metallurgy Science,” 2nd ed. (MPIF, Princeton, USA, 1994) p. 205.
20. H. F. Fischmeister, E. Arzt and R. L. Olson, Powder Metall. 4 (1978) 179.10.1179/pom.1978.21.4.179 ↗
21. E. Arzt, Acta Metall. 30 (1982) 1883.10.1016/0001-6160(82)90028-1 ↗