Modeling failure of high performance fibers: on the prediction of long-term time-to-failure
Source abstract
Abstract
Our objective is to predict the time-to-failure distribution of fibers at loads for which mean time-to-failure is comparable or longer than the fibers’ economic lifetime. We describe load induced time-to-failure of high performance fiber in terms of a classical probabilistic failure model developed by Coleman. Mimicking a series of time-to-failure measurements, using Monte Carlo simulations, we will show how to capture model parameters and their variability using the least squares method and maximum likelihood estimation. It is relatively easy to obtain an accurate prediction for the maximum allowable fiber load such that time-to-failure exceeds a predefined minimum time-to-failure with high probability. However, obtaining a reliable lower prediction limit for time-to-failure at a given, low fiber load is very difficult and requires an unfeasible extensive program of time-to-failure measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Statistical Process Monitoring · Semiconductor Lasers and Optical Devices · Optical Network Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Alwis KGNC, Burgoyne CJ (2006) Time temperature superposition to determine the stress-rupture of aramid fibres. Appl Compos Mater 13:249–26410.1007/s10443-006-9017-8 ↗
2. Alwis KGNC, Burgoyne CL (2008) Accelerated creep testing for aramid fibres using the stepped isothermal method. J Mater Sci 43:4789–4800. doi: 10.1007/s10853-008-2676-010.1007/s10853-008-2676-0 ↗
3. Burgoyne CJ, Alwis KGNC (2008) Visco-elasticity of aramid fibres. J Mater Sci 43:7091–7101. doi: 10.1007/s10853-008-3032-010.1007/s10853-008-3032-0 ↗
4. Giannopoulos IP, Burgoyne CJ (2009) Stepped isostress method for aramid fibers. In: Proceedings of 8th International Conference on Fibre Reinforced Polymers for Reinforced Concrete Structures (FRPRCS9), Sydney, Australia
5. Coleman BD (1958) Statistics and time dependence of mechanical breakdown in fibers. J Appl Phys 29(6):968–98310.1063/1.1723343 ↗
6. Fallatah GM, Dodds N, Gibson AG (2007) Long term creep and stress rupture of aramid fibre. Plast Rubber Compos 36(9):403–41210.1179/174328907X248186 ↗
7. Chambers JJ, Burgoyne CJ (1990) An experimental investigation of the stress-rupture behaviour of a parallel-lay aramid rope. J Mater Sci 25:3723–3730. doi: 10.1007/BF0057541110.1007/BF00575411 ↗
8. Guimaraes GB, Burgoyne CJ (1989) Parallel-lay aramid ropes for offshore structures. In: Proceedings of the 7th International Symposium on Offshore Engineering, Rio de Janeiro
9. Gibson AG (2006) Implementation of reinforced thermoplastic pipes (RTPs) in the oil and gas industry phase II. Creep and failure behaviour of aramid fibres. University of Newcastle
10. Ulianov C, Robinson AM, Gibson AG, Fallatah GM (2010) Reliability analysis of aramid fibre yarns. Plast Rubber Compos 39:157–16410.1179/174328910X12647080902574 ↗
11. Zhurkov SN (1965) Kinetic concept of the strength of solids. Int J Fract Mech 1:311–32310.1007/BF03545562 ↗
12. Zhurkov SN, Tomashevsky EE (1966) An investigation of fracture process of polymers by electron spin resonance method. In: Conference Proceedings: physical basis of yield and fracture, Oxford, pp 200–208
13. Pai GA, Batra SK, Hersh SP (1991) Interpreting creep and fatigue failure of fibers via deformation kinetics. J Polym Sci 47:127–141
14. Zimmerman J (1986) Failure mechanisms in polymeric fibers. In: Brostow W, Corneliussen RD (eds) Failure of plastics. Hanser Publishers, New York, pp 430–442
15. Coleman BD (1956) Time dependence of mechanical breakdown phenomena. J Appl Phys 27(8):862–610.1063/1.1722504 ↗
16. Phoenix SL, Tierney L-J (1983) A statistical model for the time dependent failure of unidirectional composite materials under local elastic load-sharing among fibers. Eng Fract Mech 18(1):193–21510.1016/0013-7944(83)90107-8 ↗
17. Pauchard V, Grosjean F, Campion-Boulharts H, Chateauminois A (2002) Application of a stress-corrosion-cracking model to an analysis of the durability of glass/epoxy composites in wet environments. Compos Sci Technol 62:493–49810.1016/S0266-3538(01)00139-7 ↗
18. Kelly A, McCartney LN (1981) Failure by stress corrosion of bundles of fibers. Proc R Soc Lond A 374:475–48910.1098/rspa.1981.0032 ↗
19. Cowking A, Attou A, Siddiqui AM, Sweet AS (1991) An accoustic emission study of failure by stress corrosion in bundles of E-Glass fibres. J Mater Sci 26:301–306. doi: 10.1007/BF0057652010.1007/BF00576520 ↗
20. Draper NR, Smith H (1981) Applied regression analysis (Wiley series in probability and mathematical statistics), 2nd edn. Wiley, New York
21. Reliawiki.org [Internet]. Experiment design and analysis reference: Chapter 3: simple linear regression analysis, Reliasoft. [updated 2013 Dec 13; Accessed 2014 March]. Available from: http://www.reliawiki.org/
22. Abramowitz M, Stegun IA (1964) Handbook of mathematical functions with formulas, graphs, and mathematical tables. NBS applied mathematics series, vol 55. National Bureau of Standards, Washington, DC
23. Kendall MG, Stuart A (1961) The advanced theory of statistics. Inference and relationships, vol 2. Charles Griffin & Co., Ltd., London
24. Lehmann EL, Casella G (1998) Theory of point estimation, 2nd edn. Springer, New York