Effect of Bi additions on the microstructure evolution and surface instability during room-temperature aging of Sn alloys
Source abstract
Abstract
Abstract Sn alloys with minor alloying additions experience spontaneous surface deterioration during room-temperature (RT) aging, a phenomenon previously demonstrated as surface instability in the research. This raises surface quality concerns for its related industrial applications, such as fixed abrasive lapping plates utilized in the production of magnetic sliders for hard disk drives (HDDs). Surface instability was considered as a result of corresponding changes in the metallic structure of Sn alloys, stemming from the release of residual energy following mechanical process over exposure time. However, no specific strategies have been proposed to control surface instability during RT aging in Sn alloys. This work focuses on optimizing the compositions of Sn alloys and investigating the effects of Bi additions on such surface instability. As lapping plates materials, Sn-Bi alloys typically incorporate minor amount of Bi. In this work, Sn-Bi alloys with Bi additions of no more than 5 wt.% were synthesized through dissolution and casting and then systematically compared with pure Sn. Results revealed that Sn alloys with more Bi additions, especially as Sn-5 wt.% Bi, exhibit more stable surface over RT aging compared to pure Sn. It was also observed that Sn-5 wt.% Bi presented the highest hardness among the tested compositions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Takahide S, Tanaka H, Hiromu C (2005) Development of lapping technology for mass production of magnetic heads in HDD. J Japan Soc Abrasive Technol 49:114–117
2. Jiang M, Hao S, Komanduri R (2003) On the advanced lapping process in the precision finishing of thin-film magnetic recording heads for rigid disc drives. Appl Phys A Mater Sci Process 77:923–932. https://doi.org/10.1007/s00339-002-2021-410.1007/s00339-002-2021-4 ↗
3. Hu B, Zhou W, Tsuchiya K (2023) Mechanism elucidation of Sn-Bi alloy lapping plate surface instability. J Alloy Compd 965:171465. https://doi.org/10.1016/j.jallcom.2023.17146510.1016/j.jallcom.2023.171465 ↗
4. Cai Y, Wang X, Du Y (2022) Surface roughening behavior of the 6063–T4 aluminum alloy during quasi-in situ uniaxial stretching. Materials (Basel) 15:6265. https://doi.org/10.3390/ma1518626510.3390/ma15186265 ↗
5. Raabe D, Sachtleber M, Zhao Z, Roters F, Zaefferer S (2001) Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation. Acta Mater 49:3433–3441. https://doi.org/10.1016/S1359-6454(01)00242-710.1016/S1359-6454(01)00242-7 ↗
6. Stoudt MR, Ricker RE (2002) The relationship between grain size and the surface roughening behavior of Al-Mg alloys. Metall and Mat Trans A 33:2883–2889. https://doi.org/10.1007/s11661-002-0273-410.1007/s11661-002-0273-4 ↗
7. Raabe D, Sachtleber M, Weiland H, Scheele G, Zhao Z (2003) Grain-scale micromechanics of polycrystal surfaces during plastic straining. Acta Mater 51:1539–1560. https://doi.org/10.1016/S1359-6454(02)00557-810.1016/S1359-6454(02)00557-8 ↗
8. Wouters O, Vellinga WP, Tijum RV, de Hosson JThM (2005) On the evolution of surface roughness during deformation of polycrystalline aluminum alloys. Acta Mater 53:4043–4050. https://doi.org/10.1016/j.actamat.2005.05.00710.1016/j.actamat.2005.05.007 ↗
9. Zhao Z, Radovitzky R, Cuitiño A (2004) A study of surface roughening in fcc metals using direct numerical simulation. Acta Mater 52:5791–5804. https://doi.org/10.1016/j.actamat.2004.08.03710.1016/j.actamat.2004.08.037 ↗
10. Romanova V, Balokhonov R, Zinovieva O (2016) A micromechanical analysis of deformation-induced surface roughening in surface-modified polycrystalline materials. Meccanica 51:359–370. https://doi.org/10.1007/s11012-015-0294-x10.1007/s11012-015-0294-x ↗
11. Liao K-C, Chen C-L (2010) Investigation of surface roughness of aluminum alloy sheet based on crystalline plasticity model. Comput Mater Sci 49:S47–S53. https://doi.org/10.1016/j.commatsci.2010.03.03810.1016/j.commatsci.2010.03.038 ↗
12. Cai Y, Wang X, Yuan S (2016) Analysis of surface roughening behavior of 6063 aluminum alloy by tensile testing of a trapezoidal uniaxial specimen. Mater Sci Eng, A 672:184–193. https://doi.org/10.1016/j.msea.2016.07.00810.1016/j.msea.2016.07.008 ↗
13. Liu G, Ji S (2018) Effect of Bi on the microstructure and mechanical properties of Sn-Zn alloys processed by rolling. Mater Charact 137:39–49. https://doi.org/10.1016/j.matchar.2018.01.01710.1016/j.matchar.2018.01.017 ↗
14. Zhao J, Qi L, Wang X, Wang L (2004) Influence of Bi on microstructures evolution and mechanical properties in Sn–Ag–Cu lead-free solder. J Alloy Compd 375:196–201. https://doi.org/10.1016/j.jallcom.2003.12.00510.1016/j.jallcom.2003.12.005 ↗
15. El-Daly AA, El-Taher AM, Gouda S (2015) Novel Bi-containing Sn–1.5Ag–0.7Cu lead-free solder alloy with further enhanced thermal property and strength for mobile products. Mater & Design (1980–2015) 65 (2015) 796–805. https://doi.org/10.1016/j.matdes.2014.10.006.10.1016/j.matdes.2014.10.006 ↗
16. Song G, Wang Y, Tan DQ (2022) A review of surface roughness impact on dielectric film properties. IET Nanodielectrics 5:1–23. https://doi.org/10.1049/nde2.1202610.1049/nde2.12026 ↗
17. Zhu L, Xu B, Wang H, Wang C (2012) On the evaluation of residual stress and mechanical properties of FeCrBSi coatings by nanoindentation. Mater Sci Eng, A 536:98–102. https://doi.org/10.1016/j.msea.2011.12.07810.1016/j.msea.2011.12.078 ↗
18. Gao F, Takemoto T (2006) Mechanical properties evolution of Sn-3.5Ag based lead-free solders by nanoindentation. Mater Lett 60:2315–2318. https://doi.org/10.1016/j.matlet.2005.12.13210.1016/j.matlet.2005.12.132 ↗
19. Cheng Y-T, Cheng C-M (2004) Scaling, dimensional analysis, and indentation measurements. Mater Sci Eng R Rep 44:91–149. https://doi.org/10.1016/j.mser.2004.05.00110.1016/j.mser.2004.05.001 ↗
20. Mahmudi R, Geranmayeh AR, Mahmoodi SR, Khalatbari A (2007) Room-temperature indentation creep of lead-free Sn–Bi solder alloys. J Mater Sci: Mater Electron 18:1071–1078. https://doi.org/10.1007/s10854-007-9124-910.1007/s10854-007-9124-9 ↗
21. Peng L, Xu Z, Gao Z, Fu MW (2018) A constitutive model for metal plastic deformation at micro/meso scale with consideration of grain orientation and its evolution. Int J Mech Sci 138–139:74–85. https://doi.org/10.1016/j.ijmecsci.2017.11.04610.1016/j.ijmecsci.2017.11.046 ↗
22. Feng Z, Li H, Yang J, Huang H, Li G, Huang D (2018) Macro-meso scale modeling and simulation of surface roughening: Aluminum alloy tube bending. Int J Mech Sci 144:696–707. https://doi.org/10.1016/j.ijmecsci.2018.06.03210.1016/j.ijmecsci.2018.06.032 ↗
23. Kattner UR (2002) Phase diagrams for lead-free solder alloys. JOM 54:45–51. https://doi.org/10.1007/BF0270918910.1007/BF02709189 ↗
24. Prasad LC, Mikula A (1999) Role of surface properties on the wettability of Sn–Pb–Bi solder alloys. J Alloy Compd 282:279–285. https://doi.org/10.1016/S0925-8388(98)00831-710.1016/S0925-8388(98)00831-7 ↗
25. Shen L, Septiwerdani P, Chen Z (2012) Elastic modulus, hardness and creep performance of SnBi alloys using nanoindentation. Mater Sci Eng, A 558:253–258. https://doi.org/10.1016/j.msea.2012.07.12010.1016/j.msea.2012.07.120 ↗
26. Peng YZ, Li CJ, Yang JJ, Zhang JT, Peng JB, Zhou GJ, Pu CJ, Yi JH (2021) Effects of bismuth on the microstructure, properties, and interfacial reaction layers of Sn-9Zn-xBi solders. Metals 11:538. https://doi.org/10.3390/met1104053810.3390/met11040538 ↗
27. Chen J, Shen J, Min D, Peng C (2009) Influence of minor Bi additions on the interfacial morphology between Sn–Zn–xBi solders and a Cu layer. J Mater Sci: Mater Electron 20:1112–1117. https://doi.org/10.1007/s10854-008-9835-610.1007/s10854-008-9835-6 ↗
28. Mahdavifard MH, Sabri MFM, Shnawah DA, Said SM, Badruddin IA, Rozali S (2015) The effect of iron and bismuth addition on the microstructural, mechanical, and thermal properties of Sn–1Ag–0.5Cu solder alloy. Microelectron Reliability 55:1886–1890. https://doi.org/10.1016/j.microrel.2015.06.13410.1016/j.microrel.2015.06.134 ↗
29. Reinikainen T, Kivilahti J (1999) Deformation behavior of dilute SnBi(0.5 to 6 at. pct) solid solutions. Metall Mater Trans A 30:123–132. https://doi.org/10.1007/s11661-999-0200-z10.1007/s11661-999-0200-z ↗
30. Oliver WC, Pharr GM (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
31. Oliver WC, Pharr GM (2004) Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology. J Mater Res 19:3–20. https://doi.org/10.1557/jmr.2004.19.1.310.1557/jmr.2004.19.1.3 ↗
32. Shen Y-L (2019) Nanoindentation for testing material properties, in: S. Schmauder, C.-S. Chen, K.K. Chawla, N. Chawla, W. Chen, Y. Kagawa (Eds.), Handbook of mechanics of materials, Springer, Singapore, 2019: pp. 1981–2012. https://doi.org/10.1007/978-981-10-6884-3_46.10.1007/978-981-10-6884-3_46 ↗
33. Hall EO (1954) Variation of Hardness of Metals with Grain Size. Nature 173:948–949. https://doi.org/10.1038/173948b010.1038/173948b0 ↗
34. Mamoru H, Masayuki W, Eisuke N (2014) Damage evaluation of ferrite steel during fatigue crack initiation process using misorientation parameter by EBSD. Trans JSME (in Japanese). https://doi.org/10.1299/transjsme.2014smm025110.1299/transjsme.2014smm0251 ↗
35. Schayes C, Bouquerel J, Vogt J-B, Palleschi F, Zaefferer S (2016) A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading. Mater Charact 115:61–70. https://doi.org/10.1016/j.matchar.2016.03.02010.1016/j.matchar.2016.03.020 ↗
36. Gussev MN, Leonard KJ (2019) In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel. J Nucl Mater 517:45–56. https://doi.org/10.1016/j.jnucmat.2019.01.03410.1016/j.jnucmat.2019.01.034 ↗
37. Wright SI, Nowell MM, Field DP (2011) A review of strain analysis using electron backscatter diffraction. Microsc Microanal 17:316–329. https://doi.org/10.1017/S143192761100005510.1017/S1431927611000055 ↗
38. Rui S-S, Shang Y-B, Fan Y-N, Han Q-N, Niu L-S, Shi H-J, Hashimoto K, Komai N (2018) EBSD analysis of creep deformation induced grain lattice distortion: a new method for creep damage evaluation of austenitic stainless steels. Mater Sci Eng, A 733:329–337. https://doi.org/10.1016/j.msea.2018.07.05810.1016/j.msea.2018.07.058 ↗
39. Liu G, Ji S (2019) Microstructure, dynamic restoration and recrystallization texture of Sn-Cu after rolling at room temperature. Mater Charact 150:174–183. https://doi.org/10.1016/j.matchar.2019.02.03210.1016/j.matchar.2019.02.032 ↗
40. Hoseini-Athar MM, Mahmudi R, Babu RP, Hedström P (2020) Effect of Zn content on the microstructural stability and grain growth kinetics of fine-grained extruded Mg–Gd–Zn alloys. J Alloy Compd 831:154766. https://doi.org/10.1016/j.jallcom.2020.15476610.1016/j.jallcom.2020.154766 ↗
41. Huang K (2023) Towards the modelling of recrystallization phenomena in multi-pass conditions: application to 304L steel, phdthesis, École Nationale Supérieure des Mines de Paris, 2011. https://pastel.archives-ouvertes.fr/pastel-00682138 (accessed May 1, 2023).
42. Sasaki K, Kamaya M, Miura T, Fukuya K (2010) Correlation between Microstructural Scale Plastic Strain and Misorientation. J Japan Instit Metals Mater 74:467–474. https://doi.org/10.2320/jinstmet.74.46710.2320/jinstmet.74.467 ↗
43. Kim I, Park SC, Kim YI, Kim D-K, Lee K-A, Oh SJ, Lee B (2023) Surface residual stress analysis of additive manufactured AlSi10Mg alloys. J Alloy Compd 945:169315. https://doi.org/10.1016/j.jallcom.2023.16931510.1016/j.jallcom.2023.169315 ↗
44. Rohrer GS (2016) The role of grain boundary energy in grain boundary complexion transitions. Curr Opin Solid State Mater Sci 20:231–239. https://doi.org/10.1016/j.cossms.2016.03.00110.1016/j.cossms.2016.03.001 ↗
45. Calcagnotto M, Ponge D, Demir E, Raabe D (2010) Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD. Mater Sci Eng, A 527:2738–2746. https://doi.org/10.1016/j.msea.2010.01.00410.1016/j.msea.2010.01.004 ↗
46. Kubin LP, Mortensen A (2003) Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues. Scripta Mater 48:119–125. https://doi.org/10.1016/S1359-6462(02)00335-410.1016/S1359-6462(02)00335-4 ↗
47. Yang J, Ji P, Zhang J, Xu W, Jiao J, Lian Y, Jiang L, Zhang B (2023) Effect of current density on the texture, residual stress, microhardness and corrosion resistance of electrodeposited chromium coating. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2023.12986810.1016/j.surfcoat.2023.129868 ↗
48. Shamsujjoha Md, Agnew SR, Fitz-Gerald JM, Moore WR, Newman TA (2018) High strength and ductility of additively manufactured 316L stainless steel explained. Metall Mater Trans A 49:3011–3027. https://doi.org/10.1007/s11661-018-4607-210.1007/s11661-018-4607-2 ↗
49. Toth LS, Gu C (2014) Ultrafine-grain metals by severe plastic deformation. Mater Charact 92:1–14. https://doi.org/10.1016/j.matchar.2014.02.00310.1016/j.matchar.2014.02.003 ↗
50. Cui L, Jiang S, Xu J, Peng RL, Mousavian RT, Moverare J (2021) Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel. Mater Des 198:109385. https://doi.org/10.1016/j.matdes.2020.10938510.1016/j.matdes.2020.109385 ↗
51. Raabe D (2014) 23 - Recovery and recrystallization: phenomena, physics, models, simulation, in: D.E. Laughlin, K. Hono (Eds.), Physical metallurgy (Fifth Edition), Elsevier, Oxford, 2014: pp. 2291–2397. https://doi.org/10.1016/B978-0-444-53770-6.00023-X.10.1016/B978-0-444-53770-6.00023-X ↗