journal article·2025-04

Effect of Al content on thermophysical properties in Fe–17Mn–0.7C twinning-induced plasticity steel

Sangbum Woo, Joong-Ki Hwang

Journal of Materials Science· Volume 60· Issue 16
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. Grassel O, Kruger L, Frommeyer G, Meyer LW (2000) High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development–properties–application. Int J Plast 16:1391–140910.1016/S0749-6419(00)00015-2 ↗
2. Bouaziz O, Guelton N (2001) Modeling of TWIP effect on work-hardening. Mater Sci Eng A 319–321:246–24910.1016/S0921-5093(00)02019-0 ↗
3. Lee YK (2012) Microstructural evolution during plastic deformation of twinning-induced plasticity steels. Scr Mater 66:1002–100610.1016/j.scriptamat.2011.12.016 ↗
4. Luo ZC, Huang MX (2020) The role of interstitial carbon atoms on the strain-hardening rate of twinning-induced plasticity steels. Scr Mater 178:264–26810.1016/j.scriptamat.2019.11.047 ↗
5. Bouaziz O, Allain S, Scott C (2008) Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scr Mater 58:484–48710.1016/j.scriptamat.2007.10.050 ↗
6. Hwang JK (2019) The microstructure dependence of drawability in ferritic, pearlitic and TWIP steels during wire drawing. J Mater Sci 54:8743–8759. https://doi.org/10.1007/s10853-019-03499-410.1007/s10853-019-03499-4 ↗
7. Kim SJ, Lee T, Hwang JK (2020) High-strength bolt manufactured by an extrusion-based forming process using twinning-induced plasticity steel. J Manuf Process 59:33–4210.1016/j.jmapro.2020.09.043 ↗
8. De Cooman BC, Estrin Y, Kim SK (2018) Twinning-induced plasticity (TWIP) steels. Acta Mater 142:283–36210.1016/j.actamat.2017.06.046 ↗
9. Bouaziz O, Allain S, Scott CP, Cugy P, Barbier D (2011) High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships. Curr Opin Solid State Mater Sci 15:141–16810.1016/j.cossms.2011.04.002 ↗
10. Jabłońska MB, Jasiak K, Kowalczyk K, Skwarski M, Rodak K, Gronostajski Z (2023) The influence of the heat generation during deformation on the mechanical properties and microstructure of the selected TWIP steels. Int J Mater Form 16:3010.1007/s12289-023-01753-4 ↗
11. Hwnag JK (2022) Comparison of temperature distribution between TWIP and plain carbon steels during wire drawing. Materials 15:869610.3390/ma15238696 ↗
12. El-Domiaty A, Kassab SZ (1998) Temperature rise in wire-drawing. J Mater Process Technol 83:72–7810.1016/S0924-0136(98)00045-4 ↗
13. Haddi A, Imad A, Vega G (2011) Analysis of temperature and speed effects on the drawing stress for improving the wire drawing process. Mater Des 32:4310–431510.1016/j.matdes.2011.04.010 ↗
14. Suliga M, Kruzel R, Garstka T, Gazdowicz J (2015) The influence of drawing speed on structure changes in high carbon steel wires. Metalurgija 54:161–164
15. Lee SK, Ko DC, Kim BM (2009) Pass schedule of wire drawing process to prevent delamination for high strength steel cord wire. Mater Des 30:2919–292710.1016/j.matdes.2009.01.007 ↗
16. Hwang JK (2022) Direct formed high-strength bolt with hot-rolled twinning-induced plasticity steel using its high strain hardening rate. J Mater Eng Perform 31:272–28510.1007/s11665-021-06174-5 ↗
17. Chin KG, Kang CY, Shin SY, Hong S, Lee S, Kim HS, Kim K, Kim NJ (2011) Effects fo Al addition on deformation and fracture mechanisms in two high manganese TWIP steels. Mater Sci Eng A 528:2922–292810.1016/j.msea.2010.12.085 ↗
18. Hong S, Shin SY, Kim HS, Lee S, Kim S, Chin KG, Kim NJ (2012) Effects of aluminum addition on tensile and cup forming properties of three twinning iduced plasticity steels. Metall Mater Trans A 43A:1870–188310.1007/s11661-011-1007-2 ↗
19. Han DK, Kim YM, Han HN, Bhadeshia HKDH, Suh DW (2014) Hydrogen and aluminium in high-manganese twinning-induced plasticity steel. Scr Mater 80:9–1210.1016/j.scriptamat.2014.01.039 ↗
20. Hong S, Shin SY, Lee J, Ahn DH, Kim HS, Kim SK, Chin KG, Lee S (2014) Serration phenomena occurring during tensile tests of three high-manganese twinning-induced plasticity (TWIP) steels. Metall Mater Trans A 45A:633–64610.1007/s11661-013-2007-1 ↗
21. Jin JE, Lee YK (2012) Effect of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel. Acta Mater 60:1680–168810.1016/j.actamat.2011.12.004 ↗
22. Yang HK, Zhang ZJ, Zhang ZF (2013) Comparison of work hardening and deformation twinning evolution in Fe–22Mn–0.6C–(1.5Al) twinning-induced plasticity steels. Scr Mater 68:992–99510.1016/j.scriptamat.2013.02.060 ↗
23. Denis S, Sjöström S, Simon A (1987) Coupled temperature, stress, phase transformation calculation. Metall Mater Trans A 18:1203–121210.1007/BF02647190 ↗
24. Li K, Tian H (2018) Integrated scheduling of reheating furnace and hot rolling based on improved multiobjective differential evolution. Complexity 2018:191943810.1155/2018/1919438 ↗
25. Saeed-Akbari A, Imlau J, Prahl U, Bleck W (2009) Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels. Metall Mater Trans A 40:3076–309010.1007/s11661-009-0050-8 ↗
26. Prieler R, Mayr B, Demuth M, Holleis B, Hochenauer C (2016) Numerical analysis of the transient heating of steel billets and the combustion process under air-fired and oxygen enriched conditions. Appl Therm Eng 103:252–26310.1016/j.applthermaleng.2016.04.091 ↗
27. Steinboeck A, Graichen K, Wild D, Kiefer T, Kugi A (2011) Model-based trajectory planning, optimization, and open-loop control of a continuous slab reheating furnace. J Process Control 21:279–29210.1016/j.jprocont.2010.08.004 ↗
28. Parker WJ, Jenkins RJ, Butler CP, Abbott GL (1961) Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity. J Appl Phys 32:1679–168410.1063/1.1728417 ↗
29. Thomsen EG, Yang CT, Bierbower TB (1954) An experimental investigation of the mechanics of plastic deformation of metals. Univ Calif Publ Eng 5:89–144
30. Kuepferle J, Wilzer J, Weber S, Theisen W (2015) Thermo-physical properties of heat-treatable steels in the temperature range relevant for hot-stamping applications. J Mater Sci 50:2594–2604. https://doi.org/10.1007/s10853-015-8829-z10.1007/s10853-015-8829-z ↗
31. Jang YJ, Kim SW (2007) An estimation of a billet temperature during reheating furnace operation. Int J Control Autom 5:43–50
32. Steau E, Mahendran M, Poologanathan K (2020) Elevated temperature thermal properties of carbon steels used in cold-formed light gauge steel frame systems. J Build Eng 28:10107410.1016/j.jobe.2019.101074 ↗
33. Barbier D, Gey N, Allain S, Bozzolo N, Humbert M (2009) Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions. Mater Sci Eng A 500:196–20610.1016/j.msea.2008.09.031 ↗
34. Jin JE, Lee YK (2009) Strain hardening behavior of a Fe–18Mn–0.6C–1.5Al TWIP steel. Mater Sci Eng A 527:157–16110.1016/j.msea.2009.08.028 ↗
35. Curtze S, Kuokkala VT (2010) Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate. Acta Mater 58:5129–514110.1016/j.actamat.2010.05.049 ↗
36. Kim JK, De Cooman BC (2016) Stacking fault energy and deformation mechanisms in Fe–xMn–0.6C–yAl TWIP steel. Mater Sci Eng A 676:216–23110.1016/j.msea.2016.08.106 ↗
37. Li S, Wang X, Chen C (2024) Effect of annealing temperature on carbide precipitation, microstructure and mechanical properties of Fe–Mn–C–(Cr, Mo, W, Ni, Nb, Ti, V) multi-alloying TWIP steel. Mater Today Commun 39:10889510.1016/j.mtcomm.2024.108895 ↗
38. Kang S, Jung YS, Jun JH, Lee YK (2010) Effects of recrystallization annealing temperature on carbide precipitation, microstructure, and mechanical properties in Fe–18Mn–0.6 C–1.5 Al TWIP steel. Mater Sci Eng A 527:745–75110.1016/j.msea.2009.08.048 ↗
39. Wu M, Chen J, Yan H, Xia W, Su B, Deng Y, Shen Y (2022) Effect of Ca addition on the mechanical properties and thermal conductivity of Mg–2Ga alloy. Mater Sci Eng A 861:14432210.1016/j.msea.2022.144322 ↗
40. Zhang Y, Zhang Z, Kang H, Nagaumi H, Yang X (2022) Development of an extremely dilute Mg–Mn–Ce alloy with high strength-thermal conductivity synergy by low-temperature extrusion. Mater Lett 326:13296510.1016/j.matlet.2022.132965 ↗
41. Oh GY, Kim YK, Kim SK, Lim HK, Kim YJ (2017) Effects of grain size and texture on thermal conductivity of AZ31 during static recrystallization. Mater Trans 58:1241–124310.2320/matertrans.M2017126 ↗
42. Chen L, Kim HS, Kim SK, DeCooman BC (2007) Localized deformation due to Portevin–LeChatelier effect in 18Mn–0.6C TWIP austenitic steel. ISIJ Int 47:1804–181210.2355/isijinternational.47.1804 ↗
43. Dastur YN, Leslie WC (1981) Mechanism of work hardening in Hadfield manganese steel. Metall Trans A 12:749–75910.1007/BF02648339 ↗
44. Lee SJ, Kim J, Kane SN, De Cooman BC (2011) On the origin of dynamic strain aging in twinning-induced plasticity steels. Acta Mater 59:6809–681910.1016/j.actamat.2011.07.040 ↗
45. Drebushchak VA (2020) Thermal expansion of solids: review on theories. J Therm Anal Calorim 142:1097–111310.1007/s10973-020-09370-y ↗
46. Hahn TA (1970) Thermal expansion of copper from 20 to 800 K—standard reference material 736. J Appl Phys 41:5096–510110.1063/1.1658614 ↗
47. Wilzer J, Küpferle J, Weber S, Theisen W (2014) Temperature-dependent thermal conductivities of non-alloyed and high-alloyed heat-treatable steels in the temperature range between 20 and 500° C. J Mater Sci 49:4833–4843. https://doi.org/10.1007/s10853-014-8183-610.1007/s10853-014-8183-6 ↗
48. Laplanche G, Gadaud P, Horst O, Otto F, Eggeler G, George EP (2015) Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy. J Alloys Compd 623:348–35310.1016/j.jallcom.2014.11.061 ↗
49. Chen K, Boyle KP (2009) Elastic properties, thermal expansion coefficients, and electronic structures of Mg and Mg-based alloys. Metall Mater Trans A 40:2751–276010.1007/s11661-009-9954-6 ↗
50. Ebert HP, Braxmeier S, Neubert D (2019) Intercomparison of thermophysical property measurements on iron and steels. Int J Thermophys 40:9610.1007/s10765-019-2568-3 ↗
51. Rudtsch S, Ebert HP, Hemberger F, Barth G, Brandt R, Groß U, Hohenauer W, Jaenicke-Roessler K, Kaschnitz E, Pfaff E, Pößnecker W, Pottlacher G, Rhode M, Wilthan B (2005) Intercomparison of thermophysical property measurements on an austenitic stainless steel. Int J Thermophys 26:855–86710.1007/s10765-005-5582-6 ↗
52. Tripathy H, Rai AK, Hajra RN, Vijaya Shanthi N, Subramanian R, Saibaba S (2018) High-temperature thermophysical properties of 18Cr–9Ni–2.95 Cu–0.58 Nb–0.1 C (mass%) austenitic stainless steel. J Therm Anal Calorim 131:2749–276110.1007/s10973-017-6792-4 ↗
53. Quested PN, Brooks RF, Chapman L, Morrell R, Youssef Y, Mills KC (2009) Measurement and estimation of thermophysical properties of nickel based superalloys. Mater Sci Technol 25:154–16210.1179/174328408X361454 ↗
54. Xu G, Deng P, Wang GX, Cao LF, Liu F (2013) Measurement of expansion coefficients of four steel types. Ironmak Steelmak 40:613–61810.1179/1743281212Y.0000000079 ↗
55. Ma H, Li Z, Wang J (2021) Effects of Y content on microstructures and thermal expansion behavior of Mg–Al–Y alloys. Mater Res Express 8:07651810.1088/2053-1591/ac144e ↗
56. Wang K, Reeber RR (2000) The perfect crystal, thermal vacancies and the thermal expansion coefficient of aluminium. Philos Mag A 80:1629–164310.1080/01418610008212140 ↗
57. Illarionov AG, Vodolazskiy FV, Barannikova NA, Kosmatskiy YI, Khudorozhkova YV (2021) Influence of phase composition on thermal expansion of Ti–0.4 Al, Ti–2.2 Al–2.5 Zr and Ti–3Al–2.5 V alloys. J Alloys Compd 875:15804910.1016/j.jallcom.2020.158049 ↗
58. Lin CL, Lee JL, Kuo SM, Li MY, Gan L, Murakami H, Mitani S, Gorsse S, Yeh AC (2021) Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10−xMnx high entropy alloys. Mater Chem Phys 271:12490710.1016/j.matchemphys.2021.124907 ↗
59. Zhuang C, Liu J, Li C, Tang D (2019) Study on high temperature solidification behavior and crack sensitivity of Fe–Mn–C–Al TWIP steel. Sci Rep 9:1596210.1038/s41598-019-52381-5 ↗
60. Huiping L, Guoqun Z, Shanting N, Chuanzhen H (2007) FEM simulation of quenching process and experimental verification of simulation results. Mater Sci Eng A 452–453:705–71410.1016/j.msea.2006.11.023 ↗
61. Jiang M, Huang C, Qian L, Jia P, Huang R, Li L (2023) Physical properties of a high manganese austenitic steel Fe–30% Mn–1% C at cryogenic temperatures. Cryogenics 129:10362910.1016/j.cryogenics.2023.103629 ↗
62. Tritt TM (2005) Thermal conductivity: theory, properties, and applications. Springer, Berlin, pp 21–91
63. Abdulagatov IM, Abdulagatova ZZ, Kallaev SN, Bakmaev AG, Ranjith PG (2015) Thermal-diffusivity and heat-capacity measurements of sandstone at high temperatures using laser flash and DSC methods. Int J Thermophys 36:658–69110.1007/s10765-014-1829-4 ↗
64. Kövér M, Behúlová M, Drienovský M, Motyčka P (2015) Determination of the specific heat using laser flash apparatus. J Therm Anal Calorim 122:151–15610.1007/s10973-015-4748-0 ↗
65. Ahsan F, Razmi J, Ladani L (2020) Experimental measurement of thermal diffusivity, conductivity and specific heat capacity of metallic powders at room and high temperatures. Powder Technol 374:648–65710.1016/j.powtec.2020.07.043 ↗
66. Tripathy H, Rai AK, Hajra RN, Vijaya Shanthi N, Subramanian R, Saibaba S (2017) High-temperature thermophysical properties of 18Cr–9Ni–2.95 Cu–0.58 Nb–0.1 C (mass%) austenitic stainless steel. J Therm Anal Calorim 131:2749–276110.1007/s10973-017-6792-4 ↗
67. Mills KC, Su Y, Li Z, Brooks RF (2004) Equations for the calculation of the thermo-physical properties of stainless steel. ISIJ Int 44:1661–166810.2355/isijinternational.44.1661 ↗
68. García AM, Colorado AF, Obando JE, Arrieta CE, Amell AA (2019) Effect of the burner position on an austenitizing process in a walking-beam type reheating furnace. Appl Therm Eng 153:633–64510.1016/j.applthermaleng.2019.02.116 ↗
69. Xing Y, Wang W, Al-azzani H (2021) Assessment of thermal properties of various types of high-strength steels at elevated temperatures. Fire Saf J 122:10334810.1016/j.firesaf.2021.103348 ↗
70. Emadi A, Saboonchi A, Taheri M, Hassanpour S (2014) Heating characteristics of billet in a walking hearth type reheating furnace. Appl Therm Eng 63:396–40510.1016/j.applthermaleng.2013.11.003 ↗
71. Mayrhofer M, Koller M, Seemann P, Prieler R, Hochenauer C (2022) CFD investigation of a vertical annealing furnace for stainless steel and non-ferrous alloys strips—a comparative study on air-staged & MILD combustion. Therm Sci Eng Prog 28:10105610.1016/j.tsep.2021.101056 ↗
72. Casal JM, Porteiro J, Míguez JL, Vázquez A (2015) New methodology for CFD three-dimensional simulation of a walking beam type reheating furnace in steady state. Appl Therm Eng 86:69–8010.1016/j.applthermaleng.2015.04.020 ↗
73. Li M, Brooks JA, Atteridge DG, Porter WD (1997) Thermophysical property measurements on low alloy high strength carbon steels. Scr Mater 36:1353–135910.1016/S1359-6462(97)00051-1 ↗
74. Ying T, Zheng MY, Li ZT, Qiao XG (2014) Thermal conductivity of as-cast and as-extruded binary Mg–Al alloys. J Alloys Compd 608:19–2410.1016/j.jallcom.2014.04.107 ↗
75. Ying T, Zheng MY, Li ZT, Qiao XG, Xu SW (2015) Thermal conductivity of as-cast and as-extruded binary Mg–Zn alloys. J Alloys Compd 621:250–25510.1016/j.jallcom.2014.09.199 ↗
76. Wang G, Li Y (2019) Effects of alloying elements and temperature on thermal conductivity of ferrite. J Appl Phys 126:12511810.1063/1.5115441 ↗
77. Mora-Barzaga G, Miranda EN, Bringa EM (2023) Do dislocations always decrease thermal conductivity? Int J Therm Sci 193:10847410.1016/j.ijthermalsci.2023.108474 ↗
78. Wilzer J, Küpferle J, Weber S, Theisen W (2015) Influence of alloying elements, heat treatment, and temperature on the thermal conductivity of heat treatable steels. Steel Res Int 86:1234–124110.1002/srin.201400294 ↗
79. Terada Y, Ohkubo K, Mohri T, Suzuki T (2002) Effects of alloying additions on thermal conductivity of ferritic iron. ISIJ Int 42:322–32410.2355/isijinternational.42.322 ↗
80. Peet MJ, Hasan HS, Bhadeshia H (2011) Prediction of thermal conductivity of steel. Int J Heat Mass Transf 54:2602–260810.1016/j.ijheatmasstransfer.2011.01.025 ↗
81. Terada Y, Ohkubo K, Mohri T, Suzuki T (1999) Thermal conductivity in Pt-based alloys. J Alloys Compd 285:233–23710.1016/S0925-8388(98)01042-1 ↗
82. Miura A, Osada T, Kawagishi K, Uchida K (2020) Thermal transport properties of Ni–Co-based superalloy. AIP Adv 10:12511810.1063/5.0030847 ↗
83. Chou HP, Chang YS, Chen SK, Yeh JW (2009) Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys. Mater Sci Eng B 163:184–18910.1016/j.mseb.2009.05.024 ↗
84. García-García V, Mejía I, Reyes-Calderón F, Benito JA, Cabrera JM (2020) FE thermo-mechanical simulation of welding residual stresses and distortion in Ti-containing TWIP steel through GTAW process. J Manuf Process 59:801–81510.1016/j.jmapro.2020.09.042 ↗
85. Williams RK, Graves RS, Weaver FJ, Yarbrough DW (1987) Effect of point defects on the phonon thermal conductivity of bcc iron. J Appl Phys 62:2778–278310.1063/1.339406 ↗
86. Zhou Y, Zhang X, Zhong G, Zhang J, Yang Y, Kang D, Li H, Jie W, Schumacher P, Li J (2022) Elucidating thermal conductivity mechanism of Al–9Si based alloys with trace transition elements (Mn, Cr, V). J Alloys Compd 907:16444610.1016/j.jallcom.2022.164446 ↗
87. Terada Y, Ohkubo K, Mohri T, Suzuki T (2003) Thermal conductivity of cobalt-base alloys. Metall Mater Trans A 34A:2026–202810.1007/s11661-003-0168-z ↗
88. Mayr B, Prieler R, Demuth M, Moderer L, Hochenauer C (2017) CFD analysis of a pusher type reheating furnace and the billet heating characteristic. Appl Therm Eng 115:986–99410.1016/j.applthermaleng.2017.01.028 ↗
89. Gardner L, Insausti A, Ng KT, Ashraf M (2010) Elevated temperature material properties of stainless steel alloys. J Constr Steel Res 66:634–64710.1016/j.jcsr.2009.12.016 ↗
90. Choi IR, Chung KS, Kim DH (2014) Thermal and mechanical properties of high-strength structural steel HSA800 at elevated temperatures. Mater Des 63:544–55110.1016/j.matdes.2014.06.035 ↗
91. Jung M, Kang M, Lee YK (2012) Finite-element simulation of quenching incorporating improved transformation kinetics in a plain medium-carbon steel. Acta Mater 60:525–53610.1016/j.actamat.2011.10.007 ↗
92. Wang KY, Jin YJ, Xu MJ, Chen JS, Lu H (2015) Estimation of heat transfer coefficient and phase transformation latent heat by modified pattern search method. Int Commun Heat Mass Transfer 68:14–1910.1016/j.icheatmasstransfer.2015.08.001 ↗
93. Fakir R, Barka N, Brousseau J (2018) Case study of laser hardening process applied to 4340 steel cylindrical specimens using simulation and experimental validation. Case Stud Therm Eng 11:15–2510.1016/j.csite.2017.12.002 ↗
94. Faini F, Attanasio A, Ceretti E (2018) Experimental and FE analysis of void closure in hot rolling of stainless steel. J Mater Process Technol 259:235–24210.1016/j.jmatprotec.2018.04.033 ↗