Toughness and plasticity mechanism of medium manganese steel in cyclic phase transformation strengthening
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Liang ZY, Cao ZH, Lu J et al (2021) Influence of co-existing medium Mn and dual phase steel microstructures on ductility and Lüders band formation. Acta Mater 221:117–128. https://doi.org/10.1016/j.actamat.2021.11741810.1016/j.actamat.2021.117418 ↗
2. Aranas C, Chu X, Jahazi M, Yue S (2018) Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions. Mater Sci Eng A 729:496–507. https://doi.org/10.1016/j.msea.2018.04.11510.1016/j.msea.2018.04.115 ↗
3. Ruiz MMV, Garcia JC, Jimenez MJA (2022) Study of the isothermal bainitic transformation and austenite stability in an advanced Al—rich medium—Mn steel. Arch Civ Mech Eng 9:1–14. https://doi.org/10.1007/s43452-022-00475-910.1007/s43452-022-00475-9 ↗
4. Zhang HT, Li HY, Yan HL et al (2023) The effect of Ti–Mo additions on microstructural evolution and superplastic deformation behavior of cold–rolled medium Mn steels. Mater Charact 203:113–131. https://doi.org/10.1016/j.matchar.2023.11305110.1016/j.matchar.2023.113051 ↗
5. Cai ZH, Cai B, Ding H et al (2016) Microstructure and deformation behavior of the hot-rolled medium manganese steels with varying aluminum-content. Mater Charact 676:263–270. https://doi.org/10.1016/j.msea.2016.08.11910.1016/j.msea.2016.08.119 ↗
6. Yang F, Luo H, Pu E et al (2018) On the characteristics of Portevin–Le Chatelier bands in cold-rolled 7Mn steel showing transformation-induced plasticity. Int J Plast 103:188–202. https://doi.org/10.1016/j.ijplas.2018.01.01010.1016/j.ijplas.2018.01.010 ↗
7. Jacob R, Raman Sankaranarayanan S, Kumaresh Babu SP (2019) Recent advancements in manganese steels-a review. Mater Today Proc 27:2852–2858. https://doi.org/10.1016/j.matpr.2020.01.29610.1016/j.matpr.2020.01.296 ↗
8. Xu Z, Shen X, Allam T et al (2022) Austenite transformation and deformation behavior of a cold-rolled medium-Mn steel under different annealing temperatures. Mater Sci Eng A 829:142–155. https://doi.org/10.1016/j.msea.2021.14211510.1016/j.msea.2021.142115 ↗
9. Nakada N, Mizutani K, Tsuchiyama T, Takaki S (2014) Difference in transformation behavior between ferrite and austenite formations in medium manganese steel. Acta Mater 65:251–258. https://doi.org/10.1016/j.actamat.2013.10.06710.1016/j.actamat.2013.10.067 ↗
10. Zhu C, Zeng J, Wang W et al (2020) Mechanism of δ → δ + γ phase transformation and hardening behavior of duplex stainless steel via sub-rapid solidification process. Mater Charact 170:110–124. https://doi.org/10.1016/j.matchar.2020.11067910.1016/j.matchar.2020.110679 ↗
11. Han Y, Shi J, Xu L et al (2012) Effects of Ti addition and reheating quenching on grain refinement and mechanical properties in low carbon medium manganese martensitic steel. Mater Des 34:427–434. https://doi.org/10.1016/j.matdes.2011.08.01510.1016/j.matdes.2011.08.015 ↗
12. Zhang R, Cao WQ, Peng ZJ et al (2013) Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel. Mater Sci Eng A 583:84–88. https://doi.org/10.1016/j.msea.2013.06.06710.1016/j.msea.2013.06.067 ↗
13. Li Y, Li W, Liu W et al (2018) The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel. Acta Mater 146:126–141. https://doi.org/10.1016/j.actamat.2017.12.03510.1016/j.actamat.2017.12.035 ↗
14. Li DZ, Xiao NM, Lan YJ et al (2007) Growth modes of individual ferrite grains in the austenite to ferrite transformation of low carbon steels. Acta Mater 55:6234–6249. https://doi.org/10.1016/j.actamat.2007.07.04110.1016/j.actamat.2007.07.041 ↗
15. Yun-bo X, Zhi-ping H, Zou Y et al (2017) Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite. Mater Sci Eng A 688:40–55. https://doi.org/10.1016/j.msea.2017.01.06310.1016/j.msea.2017.01.063 ↗
16. Varanasi RS, Lipińska-Chwałek M, Mayer J et al (2022) Mechanisms of austenite growth during intercritical annealing in medium manganese steels. Scr Mater 206:114–128. https://doi.org/10.1016/j.scriptamat.2021.11422810.1016/j.scriptamat.2021.114228 ↗
17. Luo H, Shi J, Wang C et al (2011) Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel. Acta Mater 59:4002–4014. https://doi.org/10.1016/j.actamat.2011.03.02510.1016/j.actamat.2011.03.025 ↗
18. Liu G, Li B, Xu S et al (2021) Effect of intercritical annealing temperature on multiphase microstructure evolution in ultra-low carbon medium manganese steel. Mater Charact 173:110–120. https://doi.org/10.1016/j.matchar.2021.11092010.1016/j.matchar.2021.110920 ↗
19. Wen P, Hu B, Han J et al (2022) A strong and ductile medium Mn steel manufactured via ultrafast heating process. J Mater Sci Technol 97:54–68. https://doi.org/10.1016/j.jmst.2021.04.03510.1016/j.jmst.2021.04.035 ↗
20. Ma J, Lu Q, Sun L, Shen Y (2018) Two-step intercritical annealing to eliminate lüders band in a strong and ductile medium Mn steel. Metall Mater Trans A Phys Metall Mater Sci 49:4404–4408. https://doi.org/10.1007/s11661-018-4791-010.1007/s11661-018-4791-0 ↗
21. Hu B, Luo H (2019) A novel two-step intercritical annealing process to improve mechanical properties of medium Mn steel. Acta Mater 176:250–263. https://doi.org/10.1016/j.actamat.2019.07.01410.1016/j.actamat.2019.07.014 ↗
22. Li Y, Yuan G, Li L et al (2023) Ductile 2-GPa steels with hierarchical substructure. Science 379:168–173. https://doi.org/10.1126/science.add785710.1126/science.add7857 ↗
23. da Silva JRG, McLellan RB (1976) Diffusion of carbon and nitrogen in B.C.C. iron. Mater Sci Eng 26:83–87. https://doi.org/10.1016/0025-5416(76)90229-910.1016/0025-5416(76)90229-9 ↗
24. Messina L, Nastar M, Garnier T et al (2014) Exact ab initio transport coefficients in bcc Fe-X (X=Cr, Cu, Mn, Ni, P, Si) dilute alloys. Phys Rev B Condens Matter Mater Phys 90:1–15. https://doi.org/10.1103/PhysRevB.90.10420310.1103/PhysRevB.90.104203 ↗
25. Liu Y, Zhang L, Du Y et al (2009) Atomic mobilities, uphill diffusion and proeutectic ferrite growth in Fe-Mn-C alloys. Calphad Comput Coupling Phase Diagrams Thermochem 33:614–623. https://doi.org/10.1016/j.calphad.2009.07.00210.1016/j.calphad.2009.07.002 ↗
26. Zhuang W, Zhi H, Liu H et al (2019) Effect of titanium alloying on the microstructure and properties of high manganese steel. E3S Web Conf 79:100–109. https://doi.org/10.1051/e3sconf/2019790100110.1051/e3sconf/20197901001 ↗
27. Dong Y, Zhang B, Du Y et al (2021) The significant impact of Ti addition on the hot deformation behavior of medium-manganese microalloyed steel. Steel Res Int 92:1–11. https://doi.org/10.1002/srin.20210007410.1002/srin.202100074 ↗
28. Liu Q, Fang L, Xiong Z et al (2021) The response of dislocations, low angle grain boundaries and high angle grain boundaries at high strain rates. Mater Sci Eng A 822:141–151. https://doi.org/10.1016/j.msea.2021.14170410.1016/j.msea.2021.141704 ↗
29. Zou Y, Xu YB, Hu ZP et al (2017) High strength-toughness combination of a low-carbon medium-manganese steel plate with laminated microstructure and retained austenite. Mater Sci Eng A 707:270–279. https://doi.org/10.1016/j.msea.2017.09.05910.1016/j.msea.2017.09.059 ↗
30. Wang L, Yang P, Li K et al (2018) Phase transformation and texture evolution during cold rolling and α’-M reversion in high manganese TRIP steel. Acta Metall Sin 54(12):1756–1766. https://doi.org/10.11900/0412.1961.2018.0022210.11900/0412.1961.2018.00222 ↗
31. Kalsar R, Ray RK, Suwas S (2018) Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel. Mater Sci Eng A 729:385–397. https://doi.org/10.1016/j.msea.2018.05.07110.1016/j.msea.2018.05.071 ↗
32. Wang B, Jin Q, Du X et al (2024) Corrosion mechanism and microstructure evolution of yttrium-doped marine steel. J Mater Res Technol 28:2752–2766. https://doi.org/10.1016/j.jmrt.2023.12.18910.1016/j.jmrt.2023.12.189 ↗
33. Ralston KD, Fabijanic D, Birbilis N (2011) Effect of grain size on corrosion of high purity aluminium. Electrochim Acta 56:1729–1736. https://doi.org/10.1016/j.electacta.2010.09.02310.1016/j.electacta.2010.09.023 ↗
34. Pütz RD, Allam T, Wang J et al (2022) Influence of intercritical annealing temperature on the micro-galvanic interactions between austenite and ferrite in medium-Mn steel. Corros Sci 208:110–123. https://doi.org/10.1016/j.corsci.2022.11063310.1016/j.corsci.2022.110633 ↗
35. Tan N, Qiao J, Wang Q (2023) Tribocorrosion performance of medium-manganese austenitic wear-resistant steel in simulated mine water. Corros Sci 219:111–122. https://doi.org/10.1016/j.corsci.2023.11122510.1016/j.corsci.2023.111225 ↗
36. He BB, Wang M, Huang MX (2019) Resetting the austenite stability in a medium Mn steel via dislocation engineering. Metall Mater Trans A Phys Metall Mater Sci 50:2971–2977. https://doi.org/10.1007/s11661-019-05222-z10.1007/s11661-019-05222-z ↗
37. Min T, Sik M, Jung C et al (2021) Materials science & engineering a improved strength of a medium-Mn steel by V addition without sacrificing ductility. Mater Sci Eng A 802:14–23. https://doi.org/10.1016/j.msea.2020.14068110.1016/j.msea.2020.140681 ↗
38. Ko KK, Bae HJ, Park EH et al (2022) A feasible route to produce 1.1 GPa ferritic-based low-Mn lightweight steels with ductility of 47%. J Mater Sci Technol 117:225–237. https://doi.org/10.1016/j.jmst.2021.11.05210.1016/j.jmst.2021.11.052 ↗
39. Yang J, Dong H, Xia Y et al (2021) Carbide precipitates and mechanical properties of medium Mn steel joint with metal inert gas welding. J Mater Sci Technol 75:48–58. https://doi.org/10.1016/j.jmst.2020.10.02910.1016/j.jmst.2020.10.029 ↗
40. Hu J, Li XY, Meng QW et al (2022) Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling. Mater Sci Eng A 855:143–154. https://doi.org/10.1016/j.msea.2022.14390410.1016/j.msea.2022.143904 ↗
41. Ye Q, Dong H, Guo Q et al (2024) Tailoring the austenite characteristics via dual nanoparticles to synergistically optimize the strength-ductility in cold rolled medium Mn steel. J Mater Sci Technol 169:158–171. https://doi.org/10.1016/j.jmst.2023.07.00210.1016/j.jmst.2023.07.002 ↗