journal article·2024-07

Microstructure-based interior cracking behavior of α + β titanium alloy under two stress ratios and intermediate temperature in the very high-cycle fatigue regime

Asif Mahmood, Chuanwen Sun, Muhammad Imran Lashari, Wei Li

Journal of Materials Science· Volume 59· Issue 27
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Sajadifar SV, Wegener T, Yapici GG, Niendor T (2019) Effect of grain size on the very high cycle fatigue behavior and notch sensitivity of titanium. Theor Appl Fract Mech 104:10236210.1016/j.tafmec.2019.102362 ↗
2. Li B, Gao T, Xue H, Sun Z (2022) Estimation of fatigue crack initiation in the very high cycle fatigue regime for AA7075-T6 alloy using crystal plasticity finite element method. J Mater Sci 57:1–15. https://doi.org/10.1007/s10853-021-06790-510.1007/s10853-021-06790-5 ↗
3. Geathers J, Torbet CJ, Jones JW, Daly S (2015) Investigating environmental effects on small fatigue crack growth in Ti–6242S using combined ultrasonic fatigue and scanning electron microscopy. Int J Fatigue 70:154–16210.1016/j.ijfatigue.2014.09.007 ↗
4. Furuya Y, Takeuchi E (2014) Gigacycle fatigue properties of Ti-6Al-4V alloy under tensile mean stress. Mater Sci Eng A 598:135–14010.1016/j.msea.2014.01.019 ↗
5. Heinz S, Eifler D (2016) Crack initiation mechanisms of Ti6Al4V in the very high cycle fatigue regime. Int J Fatigue 93:301–30810.1016/j.ijfatigue.2016.04.026 ↗
6. Li W, Zhao H, Nehila A, Zhang Z, Sakai T (2017) Very high cycle fatigue of TC4 titanium alloy under variable stress ratio: failure mechanism and life prediction. Int J Fatigue 104:342–35410.1016/j.ijfatigue.2017.08.004 ↗
7. Wang B, Cheng L, Li D (2022) Study on very high cycle fatigue properties of forged TC4 titanium alloy treated by laser shock peening under three-point bending. Int J Fatigue 156:10666810.1016/j.ijfatigue.2021.106668 ↗
8. Guo Z, Ma T, Chen T, Wang J, Chen X, Yang X, Vairis A (2023) Linear friction welding of equiaxed Ti17 titanium alloy: effects of microstructure evolution on tensile and impact properties. J Mater Sci 58:10189–10200. https://doi.org/10.1007/s10853-023-08666-210.1007/s10853-023-08666-2 ↗
9. Oguma H, Nakamura T (2010) The effect of microstructure on very high cycle fatigue properties in Ti-6Al-4V. Scr Mater 63:32–3410.1016/j.scriptamat.2010.02.043 ↗
10. Crupi V, Epasto G, Guglielmino E, Squillace A (2017) Influence of microstructure [alpha+ beta and beta] on very high cycle fatigue behaviour of Ti-6Al-4V alloy. Int J Fatigue 95:64–7510.1016/j.ijfatigue.2016.10.002 ↗
11. Wang S, Li S, Liu L, Li S, Gao L, Liu H, Zhou S (2023) Microstructure and mechanical properties of powder metallurgy Ti-TiBw-xFe titanium matrix composites using Ti-TiBw composite powder. J Mater Sci 58:13662–13677. https://doi.org/10.1007/s10853-023-08870-010.1007/s10853-023-08870-0 ↗
12. Bayraktar E, Claude Bathias H, Xue TH (2004) On the giga cycle fatigue behaviour of two-phase (2+) TiAl alloy. Int J Fatigue 26(12):1263–127510.1016/j.ijfatigue.2004.05.002 ↗
13. Syed AK, Zhang X, Davis AE, Kennedy JR, Martina F, Ding J, Williams S, Prangnell PB (2021) Effect of deposition strategies on fatigue crack growth behaviour of wire+ arc additive manufactured titanium alloy Ti–6Al–4V. Mater Sci Eng A 814:14119410.1016/j.msea.2021.141194 ↗
14. Hémery S, Azdine Nait-Ali M, Guéguen PV (2018) Mechanical study of crystalline orientation distribution in Ti-6Al-4V: an assessment of micro-texture induced load partitioning. Mater Design 137:22–3210.1016/j.matdes.2017.10.011 ↗
15. Pagan DC, Peterson KM, Shade PA, Pilchak AL, Dye D (2023) Using the Ti–Al system to understand plasticity and its connection to fracture and fatigue in α Ti alloys. Metall Mater Trans A 54(9):3373–338810.1007/s11661-023-07114-9 ↗
16. Xiao X, Mao Y, Qin D, Wang X, Fu L (2023) Effects of microstructure composition and orientation on micro mechanical properties of linear friction welding joint weld zone for heteromorphic TC17 titanium alloy. J Mater Sci 58:16208–16224. https://doi.org/10.1007/s10853-023-09008-y10.1007/s10853-023-09008-y ↗
17. Szczepanski CJ, Jha SK, Larsen JM, Jones JW (2012) The role of local microstructure on small fatigue crack propagation in an α+ β titanium alloy, Ti-6Al-2Sn-4Zr-6Mo. Metall Mater Trans A 43:4097–411210.1007/s11661-012-1228-z ↗
18. Fu R, Zheng L, Ling C, Zhong Z, Hong Y (2022) An experimental investigation of fatigue performance and crack initiation characteristics for an SLMed Ti-6Al-4V under different stress ratios up to very-high-cycle regime. Int J Fatigue 164:10711910.1016/j.ijfatigue.2022.107119 ↗
19. Pan X, Shouwen Xu, Qian G, Nikitin A, Shanyavskiy A, Palin-Luc T, Hong Y (2020) The mechanism of internal fatigue-crack initiation and early growth in a titanium alloy with lamellar and equiaxed microstructure. Mater Sci Eng A 798:14011010.1016/j.msea.2020.140110 ↗
20. Liu H, Wang H, Huang Z, Wang Q, Chen Q (2020) Comparative study of very high cycle tensile and torsional fatigue in TC17 titanium alloy. Int J Fatigue 139:10572010.1016/j.ijfatigue.2020.105720 ↗
21. Kuliiev R, Riekehr S, Ventzke V, Keller S, Kashaev N (2023) On the effect of testing frequency on high and very high cycle fatigue behavior of AA2024-T3, Ti-6Al-4V, and inconel 718. J Mater Eng Perform 32(23):10843–1085610.1007/s11665-023-08385-4 ↗
22. Singh SN, Deoghare AB (2023) High layer thickness laser directed energy deposition of Ti6Al4V alloy: Microstructure, fatigue behavior and fractography. Eng Fail Anal 148:10720810.1016/j.engfailanal.2023.107208 ↗
23. Viespoli LM, Bressan S, Itoh T, Hiyoshi N, Prashanth KG, Berto F (2020) Creep and high temperature fatigue performance of as build selective laser melted Ti-based 6Al-4V titanium alloy. Eng Fail Anal 111:10447710.1016/j.engfailanal.2020.104477 ↗
24. Tokaji K (2006) High cycle fatigue behaviour of Ti–6Al–4V alloy at elevated temperatures. Scr Mater 54(12):2143–214810.1016/j.scriptamat.2006.02.043 ↗
25. Han Q, Lei X, Yang H, Yang X, Su Z, Rui SS, Shi H (2021) Effects of temperature and load on fretting fatigue induced geometrically necessary dislocation distribution in titanium alloy. Mater Sci Eng A 800:14030810.1016/j.msea.2020.140308 ↗
26. Li H, Tian Z, Zheng J, Huang K, Nie B, Xu W, Zhao Z (2023) A defect-based fatigue life estimation method for laser additive manufactured Ti-6Al-4V alloy at elevated temperature in very high cycle regime. Int J Fatigue 167:10737510.1016/j.ijfatigue.2022.107375 ↗
27. Li P, Warner DH, Fatemi A, Phan N (2016) Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research. Int J Fatigue 85:130–14310.1016/j.ijfatigue.2015.12.003 ↗
28. Eylon D, Hall JA (1977) Fatigue behavior of beta processed titanium alloy IMI 685. Metall Trans A 8:981–99010.1007/BF02661583 ↗
29. Nikitin A, Palin-Luc T, Shanyavskiy A (2016) Crack initiation in VHCF regime on forged titanium alloy under tensile and torsion loading modes Int. J Fatigue 93:318–32510.1016/j.ijfatigue.2016.05.030 ↗
30. Nalla RK, Ritchie RO, Boyce BL, Campbell JP, Peters JO (2002) Influence of microstructure on high-cycle fatigue of Ti-6Al-4V: Bimodal versus lamellar structures. Metall Mater Trans A 33:899–91810.1007/s11661-002-0160-z ↗
31. Voudouris G, Di Maio D, Sever IA (2020) Experimental fatigue behaviour of CFRP composites under vibration and thermal loading. Int J Fatigue 140:10579110.1016/j.ijfatigue.2020.105791 ↗
32. Dunstan MK, Paramore JD, Fang ZZ (2018) The effects of microstructure and porosity on the competing fatigue failure mechanisms in powder metallurgy Ti-6Al-4V. Int J Fatigue 116:584–59110.1016/j.ijfatigue.2018.07.006 ↗
33. Marines-Garcia I, Paris PC, Tada H, Bathias C, Lados D (2008) Fatigue crack growth from small to large cracks on very high cycle fatigue with fish-eye failures. Eng Fract Mech 75(6):657–166510.1016/j.engfracmech.2007.05.015 ↗
34. Biswal R, Zhang X, Syed AK, Awd M, Ding J, Walther F, Williams S (2019) Criticality of porosity defects on the fatigue performance of wire+ arc additive manufactured titanium alloy. Int J Fatigue 122:208–21710.1016/j.ijfatigue.2019.01.017 ↗
35. Shiozawa K, Morii Y, Nishino S, Lu L (2006) Subsurface crack initiation and propagation mechanism in high-strength steel in a very high cycle fatigue regime. Int J Fatigue 28(11):1521–153210.1016/j.ijfatigue.2005.08.015 ↗
36. Sun C, Song Q, Zhou L, Pan X (2019) Characteristic of interior crack initiation and early growth for high cycle and very high cycle fatigue of a martensitic stainless steel. Mater Sci Eng A 758:112–12010.1016/j.msea.2019.04.015 ↗
37. Yang K, He C, Huang Qi, Huang ZY, Wang C, Wang Q, Liu YJ, Zhong B (2017) Very high cycle fatigue behaviors of a turbine engine blade alloy at various stress ratios. Int J Fatigue 99:35–4310.1016/j.ijfatigue.2016.11.032 ↗
38. Wang P, Mao P, Zhou L, Wang Z, Wang F, Wei Z, Liu Z (2024) Effect of α phase morphologies on shear localization behavior of TC4 titanium alloy at high strain rate. J Mater Sci 59:1–16. https://doi.org/10.1007/s10853-024-09385-y10.1007/s10853-024-09385-y ↗
39. Wu Y, Liu J, Wang H, Guan S, Yang R, Xiang H (2018) Effect of stress ratio on very high cycle fatigue properties of Ti-10V-2Fe-3Al alloy with duplex microstructure. J Mater Sci Technol 34(7):1189–1195. https://doi.org/10.1016/j.jmst.2017.11.03610.1016/j.jmst.2017.11.036 ↗
40. Huang ZY, Liu HQ, Wang HM, Wagner D, Khan MK, Wang QY (2016) Effect of stress ratio on VHCF behavior for a compressor blade titanium alloy. Int J Fatigue 93:232–23710.1016/j.ijfatigue.2016.05.004 ↗
41. Liu X, Sun C, Hong Y (2015) Effects of stress ratio on high-cycle and very-high-cycle fatigue behavior of a Ti–6Al–4V alloy. Mater Sci Eng A 622:228–23510.1016/j.msea.2014.09.115 ↗
42. Tokaji K, Kariya H (2000) Mean stress dependence of fatigue strength and subsurface crack initiation in Ti–15Mo–5Zr–3Al alloy. Mater Sci Eng, A 281(1–2):268–27410.1016/S0921-5093(99)00710-8 ↗
43. Zuo JH, Wang ZG, Han EH (2008) Effect of microstructure on ultra-high cycle fatigue behavior of Ti–6Al–4V. Mater Sci Eng A 73(1–2):147–15210.1016/j.msea.2007.04.062 ↗
44. Gao T, Xue H, Sun Z (2021) Effect of transformed β phase on fish-eye ductile crack initiation of a Ti-6Al-4V alloy in very high cycle fatigue regime. Mater Letters 287:12928310.1016/j.matlet.2020.129283 ↗
45. Gao Tao Xu, Zhao HX, Sun Z (2022) Characteristics and micromechanisms of fish-eye crack initiation of a Ti-6Al-4V alloy in very high cycle fatigue regime. J Mater Research Technol 21:3140–315310.1016/j.jmrt.2022.10.125 ↗
46. Sun C, Chi W, Wang W, Duan Y (2021) Characteristic and mechanism of crack initiation and early growth of an additively manufactured Ti-6Al-4V in very high cycle fatigue regime. Int J Mechanical Sci 205:10659110.1016/j.ijmecsci.2021.106591 ↗
47. Takeuchi E, Furuya Y, Nagashima N, Matsuoka S (2008) The effect of frequency on the giga-cycle fatigue properties of a Ti–6Al–4V alloy. Fatigue Fract Eng Mater Struct 31(7):599–60510.1111/j.1460-2695.2008.01257.x ↗
48. Kakiuchi T, Kawaguchi R, Nakajima M, Hojo M, Fujimoto K, Uematsu Y (2019) Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature. Int J Fatigue 126:55–6110.1016/j.ijfatigue.2019.04.025 ↗
49. Liu FL, Chen Y, He C, Li L, Wang C, Li HZ et al (2021) Tensile and very high cycle fatigue behaviors of a compressor blade titanium alloy at room and high temperatures. Mater Sci Eng A 811:14104910.1016/j.msea.2021.141049 ↗
50. Wu Y, Xiong Y, Liu W, Chen Z, Zhang X, Wang S, Cao W (2021) Effect of supersonic fine particle bombardment on microstructure and fatigue properties of Ti-6.5 Al-3.5 Mo-1.5 Zr-0.3 Si titanium alloy at different temperatures. Surf Coat Technol 421:12747310.1016/j.surfcoat.2021.127473 ↗
51. Li G, Sun C (2022) High-temperature failure mechanism and defect sensitivity of TC17 titanium alloy in high cycle fatigue. J Mater Sci Technol 122:128–140. https://doi.org/10.1016/j.jmst.2022.01.01010.1016/j.jmst.2022.01.010 ↗
52. Li W, Li M, Sun R, Xing X, Wang P, Sakai T (2020) Faceted crack induced failure behavior and micro-crack growth based strength evaluation of titanium alloys under very high cycle fatigue. Int J Fatigue 131:10536910.1016/j.ijfatigue.2019.105369 ↗
53. Li W, Xing X, Gao N, Li M, Sun R, Zhou S, Sakai T (2019) Subsurface facets-induced crack nucleation behavior and microstructure-based strength evaluation of titanium alloys in ultra-long life regime. Mater Sci Eng A 761:13805510.1016/j.msea.2019.138055 ↗
54. Li W, Li X, Sun C, Sun R, Hu T, Wang S, Lashari MI (2023) Multi-scale experimental investigation on microstructure related subsurface fatigue cracking behavior of selective-laser-melted superalloy at elevated temperature. Mater Charact 201:11296010.1016/j.matchar.2023.112960 ↗
55. Sakai T (2023) Historical review and future prospect for researches on very high cycle fatigue of metallic materials. Fatigue Fract Eng Mater Struct 46(4):1217–125510.1111/ffe.13885 ↗
56. Zhou W, Zhu G, Wang R, Yang C, Tian Y, Zhang L, Dong A, Wang D, Shu D, Sun B (2020) Inhibition of cracking by grain boundary modification in a non-weldable nickel-based superalloy processed by laser powder bed fusion. Mater Sci Eng A 791:13974510.1016/j.msea.2020.139745 ↗
57. Wu Z, Kou H, Chen N, Zhang Z, Qiang F, Fan J et al (2020) The effect of cubic-texture on fatigue cracking in a metastable β titanium alloy subjected to high-cycle fatigue. Int J Fatigue 14:10587210.1016/j.ijfatigue.2020.105872 ↗
58. Bridier F, Villechaise P, Mendez J (2005) Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation. Acta Mater 53(3):555–56710.1016/j.actamat.2004.09.040 ↗
59. Lavogiez C, Hemery S, Villechaise P (2020) Analysis of deformation mechanisms operating under fatigue and dwell-fatigue loadings in an α/β titanium alloy. Int J Fatigue 131:10534110.1016/j.ijfatigue.2019.105341 ↗
60. Clancy M, Pomeroy MJ, Belochapkine S (2012) Improved FIB milling process for TEM preparation of NiAlPt bulk alloy samples containing residual stress. Micron 43(5):627–63010.1016/j.micron.2011.11.005 ↗
61. Chen C-L, Shang D-G, Tang Z-Q, Li D-H, Yin X, Guo Y-E (2023) Fatigue failure mechanism of Ti60 titanium alloy in HCF and VHCF regime at different temperatures. Eng Fail Anal 151:10739310.1016/j.engfailanal.2023.107393 ↗
62. Neal DF, P. A., Blenkinsop, (1976) Internal fatigue origins in α-β titanium allols. Acta Metall 24(1):59–6310.1016/0001-6160(76)90147-4 ↗
63. Furukawa M, Horita Z, Nemoto M, Valiev RZ, Langdon TG (1996) Microhardness measurements and the hall-petch relationship in an Al-Mg alloy with submicrometer grain size. Acta Mater 44(11):4619–462910.1016/1359-6454(96)00105-X ↗
64. Liu F, Chen Y, He C, Wang C, Li L, Liu Y et al (2021) Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature. Int J Fatigue 152:10644610.1016/j.ijfatigue.2021.106446 ↗
65. Chan KS (2010) Changes in fatigue life mechanism due to soft grains and hard particles. Int J Fatigue 32(3):526–53410.1016/j.ijfatigue.2009.04.015 ↗
66. Chai G, Zhou N, Ciurea S, Andersson M, Peng RL (2012) Local plasticity exhaustion in a very high cycle fatigue regime. Scripta Mater 66(10):769–77210.1016/j.scriptamat.2012.02.003 ↗
67. Everaerts J, Verlinden B, Wevers M (2017) Investigation of fatigue crack initiation facets in Ti-6Al-4V using focused ion beam milling and electron backscatter diffraction. J Microsc 267(1):57–6910.1111/jmi.12547 ↗
68. Li W, Sun R, Wang P, XiaoLong Li, Zhang Y, Hu T et al (2021) Subsurface faceted-cracking behavior of selective laser melting Ni-based superalloy under very high cycle fatigue. Scripta Mater 194:11361310.1016/j.scriptamat.2020.11.001 ↗