Introducing compression platen misalignment in single fiber transverse compression analytical models
Source abstract
Abstract
International audience ; Analytical models of Single Fiber Transverse Compression Tests (SFTCTs) are commonplace for the identification of a fiber’s apparent transverse elastic modulus by inverse method. Compression platen misalignment however, has been shown to induce important identification errors due to the change in the platen-fiber contact surface compared to the parallel platen configuration. Nevertheless, methods to minimize this misalignment experimentally are sparse in the literature and no existing analytical models take it into consideration. In this paper the development of such a model is presented, which accounts for the angle around the fiber’s pitch axis, named ”tilt” angle. The predictions of this analytical model are shown to closely match the results of an equivalent Finite element model. Using force and displacement data resulting from this Finite element analysis, along with fiber’s material and geometric properties and the value of the tilt angle, the proposed analytical model produces very low identification errors of ET , independently of the tilt angle. The proposed model can thus be used to reliably identify a fiber’s transverse elastic modulus even for SFTCTs where a tilt angle is present.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Chang H, Luo J, Gulgunje PV, Kumar S (2017) Structural and functional fibers. Annu Rev Mater Res 47:331–359. https://doi.org/10.1146/annurev-matsci-120116-11432610.1146/annurev-matsci-120116-114326 ↗
2. Khan T, Hameed Sultan MT, Bin Ariffin AH (2018) The challenges of natural fiber in manufacturing, material selection, and technology application: a review. J Reinf Plast Compos 37:770–779. https://doi.org/10.1177/073168441875676210.1177/0731684418756762 ↗
3. Bourmaud A, Beaugrand J, Shah DU et al (2018) Towards the design of high-performance plant fibre composites. Prog Mater Sci 97:347–408. https://doi.org/10.1016/j.pmatsci.2018.05.00510.1016/j.pmatsci.2018.05.005 ↗
4. Abtew MA, Boussu F, Bruniaux P et al (2019) Ballistic impact mechanisms - A review on textiles and fibre-reinforced composites impact responses. Compos Struct 223:110966. https://doi.org/10.1016/j.compstruct.2019.11096610.1016/j.compstruct.2019.110966 ↗
5. Comas-Cardona S, Le Grognec P, Binetruy C, Krawczak P (2007) Unidirectional compression of fibre reinforcements. Part 1: a non-linear elastic-plastic behaviour. Compos Sci Technol 67:507–514. https://doi.org/10.1016/j.compscitech.2006.08.01710.1016/j.compscitech.2006.08.017 ↗
6. Hertz H, Jones DE, Schott GA (1896) On the contact of rigid elastic solids and on hardness. In: Miscellaneous Papers. Macmillan, pp 163-183
7. M’Ewen E (1949) XLI. Stresses in elastic cylinders in contact along a generatrix (including the effect of tangential friction). London, Edinburgh, Dublin Philos Mag J Sci 40:454–459. https://doi.org/10.1080/1478644490852173310.1080/14786444908521733 ↗
8. Hadley D, Ward I, Ward J (1965) The transverse compression of anisotropic fibre monofilaments. Proc R Soc London Ser A Math Phys Sci 285:275–286. https://doi.org/10.1098/rspa.1965.010310.1098/rspa.1965.0103 ↗
9. Morris S (1968) 39-The determination of the lateral-compression modulus of fibres. J Text Inst 59:536–547. https://doi.org/10.1080/0040500680866001610.1080/00405006808660016 ↗
10. Phoenix S, Skelton J (1974) Transverse compressive moduli and yield behavior of some orthotropic, high-modulus filaments. Text Res J. https://doi.org/10.1177/00405175740440120310.1177/004051757404401203 ↗
11. Jawad SA, Ward IM (1978) The transverse compression of oriented nylon and polyethylene extrudates. J Mater Sci 13:1381–1387. https://doi.org/10.1007/BF0055319010.1007/BF00553190 ↗
12. Cheng M, Chen W, Weerasooriya T (2004) Experimental investigation of the transverse mechanical properties of a single Kevlar® KM2 fiber. Int J Solids Struct 41:6215–6232. https://doi.org/10.1016/j.ijsolstr.2004.05.01610.1016/j.ijsolstr.2004.05.016 ↗
13. Jones MCG, Lara-Curzio E, Kopper A, Martin DC (1997) The lateral deformation of cross-linkable PPXTA fibres. J Mater Sci 32:2855–2871. https://doi.org/10.1023/A:101867240045910.1023/A:1018672400459 ↗
14. Guo Z, Casem D, Hudspeth M et al (2016) Transverse compression of two high-performance ballistic fibers. Text Res J 86:502–511. https://doi.org/10.1177/004051751559281410.1177/0040517515592814 ↗
15. Sockalingam S, Bremble R, Gillespie JW, Keefe M (2016) Transverse compression behavior of Kevlar KM2 single fiber. Compos Part A Appl Sci Manuf 81:271–281. https://doi.org/10.1016/j.compositesa.2015.11.03210.1016/j.compositesa.2015.11.032 ↗
16. Naito K, Tanaka Y, Yang JM (2017) Transverse compressive properties of polyacrylonitrile (PAN)-based and pitch-based single carbon fibers. Carbon N Y 118:168–183. https://doi.org/10.1016/j.carbon.2017.03.03110.1016/j.carbon.2017.03.031 ↗
17. Wollbrett-Blitz J, Joannès S, Bruant R et al (2016) Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing. J Polym Sci Part B Polym Phys 54:374–384. https://doi.org/10.1002/polb.2376310.1002/polb.23763 ↗
18. Govilas J, Guicheret-Retel V, Amiot F et al (2022) Platen parallelism significance and control in single fiber transverse compression tests. Compos Part A Appl Sci Manuf 159:106990. https://doi.org/10.1016/j.compositesa.2022.10699010.1016/j.compositesa.2022.106990 ↗
19. Gradshteyn IS, Ryzhik IM (2007) Table of integrals, series and products, 7th edn. Academic Press, Cambridge
20. SITARIST : Single fIber TrAnsverse compRessIon teSt with Tilt. https://doi.org/10.5281/zenodo.830140310.5281/zenodo.8301403 ↗