Development of adherent antimicrobial copper coatings on stainless steel for healthcare applications
Source abstract
Abstract
Copper coatings were fabricated using an environmentally sustainable non-cyanide electrodeposition technique. By following four-stage acid pickling treatment of the substrate and optimum parameters during electrodeposition, adhesion strength up to 9 MPa was obtained. Four different copper coatings were fabricated by varying CuSO4. 5H2O concentration in an electrolyte (10, 15, 30, and 45 g/L) to understand nucleation and growth mechanism and surface texture evolution. Nano-nodular morphology of the deposited copper marks a significant feature. It increases the fraction of grain boundaries in it. The grazing incidence X-ray diffraction analysis revealed the preferred orientation along the (111) plane with the presence of residual compressive stresses (in the range of 24.90–273.92 MPa). Surface texture studies indicated that the coating had an abundance of nano-scaled protruding structures with surface roughness’s Sa in the range of 2.507–1.674 µm (Ra in a range of 1.714–1.235 µm). It offers 3D contact with microbes. The developed coating had increased hardness (41.93%), scratch resistance (58.77%), and 9 MPa adhesion strength with the substrate. Initially, copper coatings had hydrophobicity against water (initial contact angle in the range of 134–139°). The extent of hydrophobicity decreased with exposure time. The developed coatings exhibited significant antimicrobial activity. Antimicrobial studies using the cell viability technique indicated that the coating exhibits toxicity against Escherichia coli (ATCC25922) and Staphylococcus aureus (MCC2408) microbes. 100% reduction of the survival of microbes is observed after 4 h of exposure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanoparticles: synthesis and applications · Electrodeposition and Electroless Coatings · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Schlesinger M, Paunovic M (2011) Modern electroplating, 5th edn. Wiley, Hoboken. https://doi.org/10.1002/978047060263810.1002/9780470602638 ↗
2. “Copper plating for engineering applications | Bend plating.” https://www.bendplating.com/copper-plating-for-engineering-applications/ (accessed Jun. 18, 2021)
3. “Uses of copper | Supply, demand, production, resources.” https://geology.com/usgs/uses-of-copper/ (accessed Jun. 14, 2021)
4. Ghosh S (2019) Electroless copper deposition: a critical review. Thin Solid Films 669:641–658. https://doi.org/10.1016/j.tsf.2018.11.01610.1016/j.tsf.2018.11.016 ↗
5. Bharadishettar N, Bhat UK, Panemangalore DB (2021) Coating technologies for copper based antimicrobial active surfaces: a perspective review. Metals (Basel) 11:711. https://doi.org/10.3390/met1105071110.3390/met11050711 ↗
6. Rohan JF, Thompson D (2014) Frontiers of Cu Electrodeposition and Electroless Plating for On-chip Interconnects. Springer, New York NY, pp 99–113. https://doi.org/10.1007/978-1-4614-9176-7_510.1007/978-1-4614-9176-7_5 ↗
7. Sekar R (2017) Synergistic effect of additives on electrodeposition of copper from cyanide-free electrolytes and its structural and morphological characteristics. Trans of Nonferrous Metals Soc China (Eng Ed) 27(7):1665–1676. https://doi.org/10.1016/S1003-6326(17)60189-410.1016/S1003-6326(17)60189-4 ↗
8. Sivasakthi P, Sekar R, Ramesh Bapu GNK (2015) Electrodeposition and characterisation of copper deposited from cyanide-free alkaline glycerol complex bath. Trans Inst Metal Finish 93(1):32–37. https://doi.org/10.1179/0020296714Z.00000000019610.1179/0020296714Z.000000000196 ↗
9. Sekar R, Jagadesh KK, Bapu GNKR (2015) Electrodeposition and characterisation of copper deposits from non-cyanide electrolytes. Surf Eng 31(6):433–438. https://doi.org/10.1179/1743294414Y.000000040010.1179/1743294414Y.0000000400 ↗
10. Tharamani CN, Maruthi BN, Mayanna SM (2002) Development of a non-cyanide alkaline bath for industrial copper plating. Trans IMF 80(2):37–39. https://doi.org/10.1080/00202967.2002.1187142710.1080/00202967.2002.11871427 ↗
11. Ibrahim MAM, Bakdash RS (2015) New non-cyanide acidic copper electroplating bath based on glutamate complexing agent. Surf Coat Technol 282:139–148. https://doi.org/10.1016/J.SURFCOAT.2015.10.02410.1016/J.SURFCOAT.2015.10.024 ↗
12. Kublanovsky V, Litovchenko K (2000) Mass transfer and mechanism of electrochemical reduction of copper(II) from aminoacetate electrolytes. J Electroanal Chem 495(1):10–18. https://doi.org/10.1016/S0022-0728(00)00372-710.1016/S0022-0728(00)00372-7 ↗
13. Hong B, ai Jiang CH, Wang XJ (2007) Influence of complexing agents on texture formation of electrodeposited copper. Surf Coat Technol 201(16–17):7449–7452. https://doi.org/10.1016/J.SURFCOAT.2007.02.01110.1016/J.SURFCOAT.2007.02.011 ↗
14. World Health Organization (2011) Report on the burden of endemic health care-associated infection worldwide. WHO, Geneva, Switzerland
15. Sunada K, Minoshima M, Hashimoto K (2012) Highly efficient antiviral and antibacterial activities of solid-state cuprous compounds. J Hazard Mater 235–236:265–270. https://doi.org/10.1016/j.jhazmat.2012.07.05210.1016/j.jhazmat.2012.07.052 ↗
16. Mitra D, Kang ET, Neoh KG (2020) Antimicrobial copper-based materials and coatings: potential multifaceted biomedical applications. ACS Appl Mater Interfaces 12(19):21159–21182. https://doi.org/10.1021/acsami.9b1781510.1021/acsami.9b17815 ↗
17. Grass G, Rensing C, Solioz M (2011) Metallic copper as an antimicrobial surface. Appl Environ Microbiol 77(5):1541–1547. https://doi.org/10.1128/AEM.02766-1010.1128/AEM.02766-10 ↗
18. Hutasoit N, Kennedy B, Hamilton S, Luttick A, Rahman Rashid RA, Palanisamy S (2020) Sars-CoV-2 (COVID-19) inactivation capability of copper-coated touch surface fabricated by cold-spray technology. Manuf Lett 25:93–97. https://doi.org/10.1016/J.MFGLET.2020.08.00710.1016/J.MFGLET.2020.08.007 ↗
19. Govind V et al (2021) Antiviral properties of copper and its alloys to inactivate covid-19 virus: a review. Biometals 34(6):1217–1235. https://doi.org/10.1007/S10534-021-00339-410.1007/S10534-021-00339-4 ↗
20. Shigetoh K, Hirao R, Ishida N (2023) Durability and surface oxidation states of antiviral nano-columnar copper thin films. ACS Appl Mater Interfaces 15(16):20398–20409. https://doi.org/10.1021/ACSAMI.3C01400/ASSET/IMAGES/LARGE/AM3C01400_0010.JPEG10.1021/ACSAMI.3C01400/ASSET/IMAGES/LARGE/AM3C01400_0010.JPEG ↗
21. Banthia S, Sengupta S, Das S, Das K (2019) Cu, Cu-SiC functionally graded coating for protection against corrosion and wear. Surf Coat Technol 374:833–844. https://doi.org/10.1016/j.surfcoat.2019.06.05010.1016/j.surfcoat.2019.06.050 ↗
22. Kim J et al (2021) Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion. Front Bioeng Biotechnol 9:643722. https://doi.org/10.3389/fbioe.2021.64372210.3389/fbioe.2021.643722 ↗
23. Lu L, Chen X, Huang X, Lu K (1979) Revealing the maximum strength in nanotwinned copper. Science 323(5914):607–610. https://doi.org/10.1126/science.116764110.1126/science.1167641 ↗
24. Gonczy ST, Randall N (2005) An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. Int J Appl Ceram Technol 2(5):422–428. https://doi.org/10.1111/j.1744-7402.2005.02043.x10.1111/j.1744-7402.2005.02043.x ↗
25. Morshed MM, McNamara BP, Cameron DC, Hashmi MSJ (2003) Effect of surface treatment on the adhesion of DLC film on 316L stainless steel. Surf Coat Technol 163–164:541–545. https://doi.org/10.1016/S0257-8972(02)00619-910.1016/S0257-8972(02)00619-9 ↗
26. Isa NNC, Mohd Y, Zaki MHM, Mohamad SAS (2017) Characterization of copper coating electrodeposited on stainless steel substrate. Int J Electrochem Sci 12(7):6010–6021. https://doi.org/10.20964/2017.07.5810.20964/2017.07.58 ↗
27. Homjabok W, Permpoon S, Lothongkum G (2010) Pickling behavior of AISI 304 stainless steel in sulfuric and hydrochloric acid solutions. J Metals Mater Miner 20(2):1–6
28. Augustin A, Huilgol P, Udupa KR, Bhat UK (2016) Effect of current density during electrodeposition on microstructure and hardness of textured Cu coating in the application of antimicrobial Al touch surface. J Mech Behav Biomed Mater 63:352–360. https://doi.org/10.1016/j.jmbbm.2016.07.01310.1016/j.jmbbm.2016.07.013 ↗
29. Bahl S, Suwas S, Chatterjee K (2014) The importance of crystallographic texture in the use of titanium as an orthopedic biomaterial. RSC Adv 4(72):38078–38087. https://doi.org/10.1039/c4ra05440g10.1039/c4ra05440g ↗
30. Hamid ZA, Aal AA (2009) New environmentally friendly noncyanide alkaline electrolyte for copper electroplating. Surf Coat Technol 203(10–11):1360–1365. https://doi.org/10.1016/j.surfcoat.2008.11.00110.1016/j.surfcoat.2008.11.001 ↗
31. Stegmann C et al (2014) Platinum nanowires with pronounced texture, controlled crystallite size and excellent growth homogeneity fabricated by optimized pulsed electrodeposition. RSC Adv 4(10):4804–4810. https://doi.org/10.1039/C3RA46204H10.1039/C3RA46204H ↗
32. Rosenberg M et al (2019) Potential ecotoxicological effects of antimicrobial surface coatings: a literature survey backed up by analysis of market reports. PeerJ 7:e631510.7717/peerj.6315 ↗
33. Li LF et al (2005) Mechanism of single and multiple step pickling of 304 stainless steel in acid electrolytes. Corros Sci 47(5):1307–1324. https://doi.org/10.1016/j.corsci.2004.06.02510.1016/j.corsci.2004.06.025 ↗
34. Augustin A, Bhat KU, Udupa KR, Hegde AC (2015) Electron microscopic study of nodules formed during electrodeposition of copper on aluminium. Mater Sci Forum 830–831:371–374. https://doi.org/10.4028/www.scientific.net/MSF.830-831.37110.4028/www.scientific.net/MSF.830-831.371 ↗
35. Augustin A, Rajendra Udupa K, Udaya Bhat K (2016) Crystallite size measurement and micro-strain analysis of electrodeposited copper thin film using Williamson-Hall method. AIP Conf Proc 1728:1–4. https://doi.org/10.1063/1.494654310.1063/1.4946543 ↗
36. Weil R (1970) The oriign of stress in electrodeposits. Plating 57:1231–1237
37. Aliyu A, Srivastava C (2021) Correlation between growth texture, crystallite size, lattice strain and corrosion behavior of copper-carbon nanotube composite coatings. Surf Coat Technol 405:126596. https://doi.org/10.1016/J.SURFCOAT.2020.12659610.1016/J.SURFCOAT.2020.126596 ↗
38. Augustin A, Rajendra Udupa K, Udaya Bhat K (2019) Characterization of DC magnetron sputtered copper thin film on aluminium touch surface. Trans Indian Inst Metals 72(6):1683–1685. https://doi.org/10.1007/s12666-019-01714-z10.1007/s12666-019-01714-z ↗
39. Balasubramanian A, Srikumar DS, Raja G, Saravanan G, Mohan S (2013) Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel. Surf Eng 25(5):389–392. https://doi.org/10.1179/026708408X34468010.1179/026708408X344680 ↗
40. Drory MD, Thouless MD, Evans AG (1988) On the decohesion of residually stressed thin films. Acta Metall 36(8):2019–2028. https://doi.org/10.1016/0001-6160(88)90303-310.1016/0001-6160(88)90303-3 ↗
41. Erwinski FC, Kedzierski Z (1997) On the mechanism of microcrack formation in nanocrystalline Fe-Ni electrodeposits. J mater sci 32:2957–296110.1023/A:1018693005002 ↗
42. Dini JW (1993) Electrodeposition—the materials science of coatings and substrates, Jan 1994, vol 367. Noyes publications, Park Ridge, NJ, pp 88–89
43. Tripathi P, Ramkumar J, Balani K (2021) Microscratching and fretting of electro-co-deposited Cr-based composite coatings with BN, graphene, and diamond reinforcements. J Mater Sci 56(10):6148–6166. https://doi.org/10.1007/s10853-020-05656-610.1007/s10853-020-05656-6 ↗
44. Vereschaka A et al (2020) Influence of the thickness of a nanolayer composite coating on values of residual stress and the nature of coating wear. Coatings 10(1):63. https://doi.org/10.3390/coatings1001006310.3390/coatings10010063 ↗
45. Chawla V, Jayaganthan R, Chawla AK, Chandra R (2009) Microstructural characterizations of magnetron sputtered Ti films on glass substrate. J Mater Process Technol 209(7):3444–3451. https://doi.org/10.1016/j.jmatprotec.2008.08.00410.1016/j.jmatprotec.2008.08.004 ↗
46. Pawlus P, Reizer R, Wieczorowski M, Krolczyk G (2020) Material ratio curve as information on the state of surface topography—a review. Precis Eng 65:240–258. https://doi.org/10.1016/j.precisioneng.2020.05.00810.1016/j.precisioneng.2020.05.008 ↗
47. Leach R (2013) Characterization of areal surface texture, 1st edn. Springer, Berlin, pp 45–9710.1007/978-3-642-36458-7 ↗
48. Townsend A, Senin N, Blunt L, Leach RK, Taylor JS (2016) Surface texture metrology for metal additive manufacturing: a review. Precis Eng 46:34–47. https://doi.org/10.1016/j.precisioneng.2016.06.00110.1016/j.precisioneng.2016.06.001 ↗
49. Amiriafshar M, Rafieazad M, Duan X, Nasiri A (2020) Fabrication and coating adhesion study of superhydrophobic stainless steel surfaces: the effect of substrate surface roughness. Surf Interfaces 20:100526. https://doi.org/10.1016/j.surfin.2020.10052610.1016/j.surfin.2020.100526 ↗
50. Low KO, El-Tayeb NSM, Brevern PV, Chong FM (2009) Study on the scratch hardness and indentation hardness of burnished poly (Oxymethylene) surfaces. Tribol Trans 52(2):197–203. https://doi.org/10.1080/1040200080230249010.1080/10402000802302490 ↗
51. Beegan D, Chowdhury S, Laugier MT (2007) Comparison between nanoindentation and scratch test hardness (scratch hardness) values of copper thin films on oxidised silicon substrates. Surf Coat Technol 201(12):5804–5808. https://doi.org/10.1016/j.surfcoat.2006.10.03110.1016/j.surfcoat.2006.10.031 ↗
52. Konkhunthot N, Photongkam P, Wongpanya P (2019) Improvement of thermal stability, adhesion strength and corrosion performance of diamond-like carbon films with titanium doping. Appl Surf Sci 469:471–486. https://doi.org/10.1016/j.apsusc.2018.11.02810.1016/j.apsusc.2018.11.028 ↗
53. Hassan MA, Bushroa AR, Mahmoodian R (2015) Identification of critical load for scratch adhesion strength of nitride-based thin films using wavelet analysis and a proposed analytical model. Surf Coat Technol 277:216–221. https://doi.org/10.1016/j.surfcoat.2015.07.06110.1016/j.surfcoat.2015.07.061 ↗
54. Beake BD, Vishnyakov VM, Valizadeh R, Colligon JS (2006) Influence of mechanical properties on the nanoscratch behaviour of hard nanocomposite TiN/Si3N4 coatings on Si. J Phys D Appl Phys 39(7):1392–1397. https://doi.org/10.1088/0022-3727/39/7/00910.1088/0022-3727/39/7/009 ↗
55. Burnett PJ, Rickerby DS (1988) The scratch adhesion test: an elastic-plastic indentation analysis. Thin Solid Films 157(2):233–254. https://doi.org/10.1016/0040-6090(88)90006-510.1016/0040-6090(88)90006-5 ↗
56. Ariharan S, Maurya R (2021) Assessment of plasma sprayed carbon nanotube reinforced Al2O3-based nanocomposite with micro-scratching. Surf Coat Technol 418:127216. https://doi.org/10.1016/j.surfcoat.2021.12721610.1016/j.surfcoat.2021.127216 ↗
57. Wirasate S, Boerio FJ (2005) Effect of adhesion, film thickness, and substrate hardness on the scratch behavior of poly(carbonate) films. J Adhes 81(5):509–528. https://doi.org/10.1080/0021846059094495410.1080/00218460590944954 ↗
58. Ma ZS, Zhou YC, Long SG, Lu C (2012) On the intrinsic hardness of a metallic film/substrate system: Indentation size and substrate effects. Int J Plast 34:1–11. https://doi.org/10.1016/J.IJPLAS.2012.01.00110.1016/J.IJPLAS.2012.01.001 ↗
59. Gamonpilas C, Busso EP (2004) On the effect of substrate properties on the indentation behaviour of coated systems. Mater Sci Eng A 380(1–2):52–61. https://doi.org/10.1016/J.MSEA.2004.04.03810.1016/J.MSEA.2004.04.038 ↗
60. Augustin A, Udupa KR, K UB (2015) Effect of Pre-Zinc coating on the properties and structure of DC magnetron sputtered copper thin film on aluminium. Am J Mater Sci 5:58–61. https://doi.org/10.5923/c.materials.201502.1210.5923/c.materials.201502.12 ↗
61. Ye M, Delplancke JL, Berton G, Segers L, Winand R (1998) Characterization and adhesion strength study of Zn coatings electrodeposited on steel substrates. Surf Coat Technol 105(1–2):184–188. https://doi.org/10.1016/S0257-8972(98)00490-310.1016/S0257-8972(98)00490-3 ↗
62. Jothi Prakash CG, Prasanth R (2021) Approaches to design a surface with tunable wettability: a review on surface properties. J Mater Sci 56(1):108–135. https://doi.org/10.1007/s10853-020-05116-110.1007/s10853-020-05116-1 ↗
63. Augustin A, Rajendra Udupa K, Udaya Bhat K (2016) Effect of coating current density on the wettability of electrodeposited copper thin film on aluminum substrate. Perspect Sci (Neth) 8:472–474. https://doi.org/10.1016/j.pisc.2016.06.00310.1016/j.pisc.2016.06.003 ↗
64. Santo CE et al (2011) Bacterial killing by dry metallic copper surfaces. Appl Environ Microbiol 77(3):794–802. https://doi.org/10.1128/AEM.01599-1010.1128/AEM.01599-10 ↗
65. Warnes SL, Caves V, Keevil CW (2012) Mechanism of copper surface toxicity in Escherichia coli O157:H7 and Salmonella involves immediate membrane depolarization followed by slower rate of DNA destruction which differs from that observed for gram-positive bacteria. Environ Microbiol 14(7):1730–1743. https://doi.org/10.1111/j.1462-2920.2011.02677.x10.1111/j.1462-2920.2011.02677.x ↗
66. Wu S, Zuber F, Maniura-Weber K, Brugger J, Ren Q (2018) Nanostructured surface topographies have an effect on bactericidal activity. J Nanobiotechnol 16(1):1–9. https://doi.org/10.1186/S12951-018-0347-010.1186/S12951-018-0347-0 ↗
67. Pal S, Tak YK, Song JM (2007) Does the antibacterial activity of silver nanoparticles depend on the shape of the nanoparticle? A study of the gram-negative bacterium Escherichia coli. Appl Environ Microbiol 73(6):1712–1720. https://doi.org/10.1128/AEM.02218-0610.1128/AEM.02218-06 ↗
68. Nie Y, Kalapos C, Nie X, Murphy M, Hussein R, Zhang J (2010) Superhydrophilicity and antibacterial property of a Cu-dotted oxide coating surface. Ann Clin Microbiol Antimicrob 9:1–10. https://doi.org/10.1186/1476-0711-9-2510.1186/1476-0711-9-25 ↗
69. Gottenbos B et al (2003) Positively charged biomaterials exert antimicrobial effects on gram-negative bacilli in rats. Biomaterials 24(16):2707–2710. https://doi.org/10.1016/S0142-9612(03)00083-810.1016/S0142-9612(03)00083-8 ↗