Structures and stabilities of titanium hydride surfaces: a first-principles thermodynamic study
Source abstract
Abstract
The surface structures and relative stabilities of low-miller-index surfaces of γ-TiH and γ-TiH2 have been investigated as a direct function of environmental conditions (hydrogen partial pressure pH2 and temperature T), using the first-principles thermodynamic calculations. The results were used to construct the surface phase diagrams for a wide pH2 range at T = 300 and 900 K. The γ-TiH surfaces tend to be dominated by the non-stoichiometric (110) at low pH2 values, and the most energy-favored surface termination would change from the 110-ns-2Ti1H to the 110-ns-2Ti2H and then to the 110-ns-2Ti4H as pH2 increases. For pH2 > e−43.6 at 300 K (or pH2 > e−2.5 at 900 K), γ-TiH can no longer be stable but have the tendency to transform into γ-TiH2, by consistently absorbing H from the gaseous environment. The γ-TiH2 surfaces tend to be dominated by the stoichiometric (111) facet with the 111-stoi-2H termination and with a surface energy of 1.31 J/m2.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Hydrogen Storage and Materials · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Lütjering G, Williams JC (2007) Titanium, 2nd edn. Springer, Heidelberg
2. Manchester FD, San-Martin A (1987) The H-Ti (Hydrogen–Titanium) system. Bull Alloy Phase Diagr 8:30–4210.1007/BF02868888 ↗
3. Tao SX, Notten PHL, Van Santen RA, Jansen APJ (2009) Density functional theory studies of the hydrogenation properties of Mg and Ti. Phys Rev B 79:14412110.1103/PhysRevB.79.144121 ↗
4. Wang XQ, Wang JT (2010) Structural stability and hydrogen diffusion in TiHx alloys. Solid State Commun 150:1715–171810.1016/j.ssc.2010.06.004 ↗
5. Kolesnikov AI, Balagurov AM, Bashkin IO, Fedotovt VK, Malyshevt VYu, Mironova GM, Ponyatovsky EG (1993) A real-time neutron diffraction study of phase transitions in the Ti–D system after high-pressure treatment. J Phys Condens Matter 5:5045–505810.1088/0953-8984/5/29/003 ↗
6. Wang K, Kong XC, Du JL, Li CH, Li ZL, Wu Z (2010) Thermodynamic description of the Ti–H system. Calphad 34:317–32310.1016/j.calphad.2010.07.001 ↗
7. Hodgson A (2000) State resolved desorption measurements as a probe of surface reactions. Prog Surf Sci 63:1–6110.1016/S0079-6816(99)00017-9 ↗
8. Sakintuna B, Lamari-Darkrim F, Hirscher M (2007) Metal hydride materials for solid hydrogen storage: a review. Int J Hydrog Energy 32:1121–114010.1016/j.ijhydene.2006.11.022 ↗
9. Zhang CS, Li B, Norton PR (1996) The initial stages of interaction of hydrogen with the Zr (1010) surface. Surf Sci 346:206–22110.1016/0039-6028(95)00904-3 ↗
10. Li FS, Li SL, Yang K, Wang YL (2021) Morphology and microstructure evolution of surface hydride in zirconium alloys during hydrogen desorption process. Int J Hydrog Energy 46:24247–2425510.1016/j.ijhydene.2021.05.008 ↗
11. Wang F, Li RF, Ding CP, Tang WK, Wang YB, Xu SM, Yu RH, Wu Y (2017) Recent progress on the hydrogen storage properties of ZrCo-based alloys applied in international thermonuclear experimental reactor (ITER). Prog Nat Sci 27:58–6510.1016/j.pnsc.2016.12.018 ↗
12. Yan G, Chen WD, Zhong XK, Yan SF (2013) Properties of oxide coating on the surface of ZrH1.8 prepared by microarc oxidation with different positive voltages. Rare Met 32:169–17310.1007/s12598-013-0028-y ↗
13. Ma MW, Liang L, Tang BH, Xiang W, Wang Y, Cheng YL, Tan XH (2015) Decomposition kinetics study of zirconium hydride by interrupted thermal desorption spectroscopy. J Alloys Compd 645:S217–S22010.1016/j.jallcom.2015.01.054 ↗
14. Shen CL, Jia YP, Xu CH, Hu SL, Zhou XS, Long XG (2022) Adsorption and diffusion behavior of hydrogen on the M-doped (M=Zr, Mo, Y, Cu, Pd, Ir, Mg, Al, Si) Ti(0001) surfaces: a first-principles study. Surf Sci 725:12214910.1016/j.susc.2022.122149 ↗
15. Wang L, Zhou F, Meng YS, Ceder G (2007) First-principles study of surface properties of LiFePO4: surface energy, structure, Wulff shape, and surface redox potential. Phys Rev B 76:16543510.1103/PhysRevB.76.165435 ↗
16. Kiejna A, Lundqvist BI (2001) First-principles study of surface and subsurface O structures at Al (111). Phys Rev B 63:08540510.1103/PhysRevB.63.085405 ↗
17. Yang LT, Jiang Y, Odette GR, Zhou WC, Liu ZM, Liu Y (2013) Nonstoichiometry and relative stabilities of Y2Ti2O7 polar surfaces: a density functional theory prediction. Acta Mater 61:7260–727010.1016/j.actamat.2013.08.031 ↗
18. Sun SP, Li XP, Wang HJ, Jiang Y, Yi DQ (2016) Adsorption of oxygen atom on MoSi2 (110) surface. Appl Surf Sci 382:239–24810.1016/j.apsusc.2016.04.133 ↗
19. Liang CP, Gong HR (2010) Structural stability, mechanical property and phase transition of the Ti–H system. Int J Hydrog Energy 35:11378–1138610.1016/j.ijhydene.2010.07.074 ↗
20. Xu QC, Van-Der-Ven A (2007) First-principles investigation of metal-hydride phase stability: The Ti-H system. Phys Rev B 76:06420710.1103/PhysRevB.76.064207 ↗
21. Ukita S, Ohtani H, Hasebe M (2007) Thermodynamic analysis of the Ti-H and Zr-H binary phase diagrams. J Jpn I Met 71:721–72910.2320/jinstmet.71.721 ↗
22. Shanavas KV, Lindsay L, Parker DS (2016) Electronic structure and electron-phonon coupling in TiH2. Sci Rep 6:2810210.1038/srep28102 ↗
23. Shimizu R, Sasahara Y, Hamada I, Oguchi H, Ogura S, Shirasawa T, Kitamura M, Horiba K, Kumigashira H, Orimo S, Fukutani K, Hitosugi T (2020) Polarity reversal of the charge carrier in tetragonal TiHx (x=1.6–2.0) at low temperatures. Phys Rev Res 2:03346710.1103/PhysRevResearch.2.033467 ↗
24. Billeter E, Łodziana Z, Borgschulte A (2021) Surface properties of the hydrogen–titanium system. J Phys Chem C 125:25339–2534910.1021/acs.jpcc.1c08635 ↗
25. Shen CL, Liu Y, Gong YX, Liu ZQ, Jiang Y, Xu CH, Zhou XS, Long XG (2022) Environment-dependent phase stabilities of titanium hydrides: a first-principles prediction. T Nonferr Metal Soc, in press10.1016/S1003-6326(23)66314-9 ↗
26. Siegel DJ, Hector LG, Adams JB (2003) Ab initio study of Al-ceramic interfacial adhesion. Phys Rev B 67:09210510.1103/PhysRevB.67.092105 ↗
27. Jiang Y, Smith JR, Evans AG (2008) First principles assessment of metal/oxide interface adhesion. Appl Phys Lett 92:14191810.1063/1.2907339 ↗
28. Jiang Y, Smith JR (2009) Pt effects in γ-Ni(Al)/α-Al2O3 adhesion. J Mater Sci 44:1734–1740https://doi.org/10.1007/s10853-008-3084-110.1007/s10853-008-3084-1 ↗
29. Jiang Y, Wei YG, Smith JR, Hutchinson JW, Evans AG (2010) First principles based predictions of the toughness of a metal/oxide interface. Int J Mater Res 101:8–1510.3139/146.110254 ↗
30. Biswas A, Siegel DJ, Wolverton C, Seidman DN (2011) Precipitates in Al-Cu alloys revisited: atom-probe tomographic experiments and first-principles calculations of compositional evolution and interfacial segregation. Acta Mater 59:6187–620410.1016/j.actamat.2011.06.036 ↗
31. Lan GQ, Jiang Y, Yi DQ, Liu SJ (2012) Theoretical prediction of impurity effects on the internally oxidized metal/oxide interface: the case study of S on Cu/Al2O3. Phys Chem Chem Phys 14:11178–1118410.1039/c2cp41079f ↗
32. Kressese G, Furthmüller J (1996) Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comp Mater Sci 6:15–5010.1016/0927-0256(96)00008-0 ↗
33. Kresse G, Joubert D (1999) From ultrasoft pseudopotentials to the projector augmented-wave method. Phys Rev B 59:1758–177510.1103/PhysRevB.59.1758 ↗
34. Perdew JP, Burke K, Ernzerhof M (1996) Generalized gradient approximation made simple. Phys Rev Lett 77:3865–386810.1103/PhysRevLett.77.3865 ↗
35. Togo A, Oba F, Tanaka I (2008) First-principles calculations of the ferroelastic transition between rutile-type and CaCl2-type SiO2 at high pressures. Phys Rev B 78:13410610.1103/PhysRevB.78.134106 ↗
36. Gonze X (1995) Perturbation expansion of variational principles at arbitrary order. Phys Rev A 52:1086–109510.1103/PhysRevA.52.1086 ↗
37. There are some very small imaginary frequencies (less than 0.1 THz) predicted for γ-TiH2 along the Γ→ M direction in Fig. 02. Calculation with the LDA functionals shows no imaginary modes, indicating that these very small imaginary frequencies are resulted from the translational symmetry breaking caused by the GGA type functionals (see Developers’ Manual for the PHonon, Ver. 7.0, QUANTUM ESPRESSOTM). These imaginary frequencies was thus ignored and the γ-TiH2 structure can be determined as dynamically stable. Numerous experiments also confirmed γ-TiH2 as a stable bulk phase in Ti-H system for temperatures up to 650 °C (or 923 K) (see Okamoto H (2011) H-Ti (Hydrogen-Titanium). J Phase Equilib Diff 32:174–175
38. Setyawan W, Curtarolo S (2010) High-throughput electronic band structure calculations: challenges and tools. Comp Mater Sci 49:299–31210.1016/j.commatsci.2010.05.010 ↗
39. Jiang Y, Adams JB, Van-Schilfgaarde M (2005) Density-functional calculation of CeO2 surfaces and prediction of effects of oxygen partial pressure and temperature on stabilities. J Chem Phys 123:06470110.1063/1.1949189 ↗
40. Chase MW (1998) NIST-JANAF thermochemical tables, 4th edn. American Institute of Physics, New York
41. Irikura KK (2007) Experimental vibrational zero-point energies: diatomic molecules. J Phys Chem Ref Data 36:389–39710.1063/1.2436891 ↗
42. Ma MW, Wang L, Wang Y, Xiang W, Liu P, Tang BH, Xiao H (2017) Effect of hydrogen content on hydrogen desorption kinetics of titanium hydride. J Alloys Compd 709:445–45210.1016/j.jallcom.2017.03.176 ↗
43. Shimizu R, Sasahara Y, Oguchi H, Yamamoto K, Sugiyama I, Shiraki S, Orimo S, Hitosugi T (2017) Fabrication of atomically abrupt interfaces of single-phase TiH2 and Al2O3. APL Mater 5:08610210.1063/1.4996984 ↗
44. Yoshimatsu K, Suzuki T, Tsuchimine N, Horiba K, Kumigashira H, Oshima T, Ohtomo A (2015) Direct growth of metallic TiH2 thin films by pulsed laser deposition. Appl Phys Express 8:03580110.7567/APEX.8.035801 ↗