Investigation on the pore structure and adsorption capacity of silica aerogels prepared with different cations
Source abstract
Abstract
The structural characteristics of silica aerogels prepared under different concentrations of Na+, Ca2+ and Al3+ were thoroughly evaluated by using XRD and FTIR, and then, their adsorption capacity for the oils and organic solvents was investigated through a combined technique of 1H-NMR, nitrogen adsorption and SEM observation. The results show that the different cations and their varied concentrations can significantly change the adsorption capacity of silica aerogels, which is closely related to the correspondingly modified pore structure and pore volume. Specifically, Na+ does not involve in the formed skeleton of the silica aerogel, but precipitates as sodium chloride crystals, which reduces the pore volume of silica aerogels and then decreases the adsorption capacity. The increased [Ca2+] can increase the pore volume and pore size of silica aerogels, but a first increase and then decrease in the adsorption capacity of the aerogels is observed, which could be related to the reduced capillary force due to the increased pore size. At last, the presence of Al3+ can greatly decrease the pore volume of the silica aerogels and their corresponding adsorption capacity, which could be caused by the participation of Al3+ in the formed skeleton of silica aerogels.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Mesoporous Materials and Catalysis · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Lin B, Chen J, Li ZT, He FA, Li DH (2019) Superhydrophobic modification of polyurethane sponge for the oil-water separation. Surf Coat Technol 359:216–22610.1016/j.surfcoat.2018.12.054 ↗
2. Wahi R, Chuah LA, Choong T, Ngaini Z, Nourouzi MM (2013) Oil removal from aqueous state by natural fibrous sorbent: an overview. Sep Purif Technol 113:51–6310.1016/j.seppur.2013.04.015 ↗
3. Li L, Li B, Sun H, Zhang J (2017) Compressible and conductive carbon aerogels from waste paper with exceptional performance for oil/water separation. J Mater Chem A 5:14858–1486410.1039/C7TA03511J ↗
4. Schmidt M, Schwertfeger F (1998) Applications for silica aerogel products. J Non-Cryst Solids 225:364–36810.1016/S0022-3093(98)00054-4 ↗
5. Yun S, Luo H, Gao Y (2014) Superhydrophobic silica aerogel microspheres from methyltrimethoxysilane: rapid synthesis via ambient pressure drying and excellent absorption properties. RSC Adv 4:4535–454210.1039/C3RA46911E ↗
6. Zhang Y, Wang J, Zhang X (2018) Surfactant-free synthesis of silica aerogel microspheres with hierarchically porous structure. J Colloid Interface Sci 515:1–910.1016/j.jcis.2018.01.010 ↗
7. Maleki H (2016) Recent advances in aerogels for environmental remediation applications: a review. Chem Eng J 300:98–11810.1016/j.cej.2016.04.098 ↗
8. Dorcheh A, Abbasi MH (2008) Silica aerogel; synthesis, properties and characterization. J Mater Process Technol 199:10–2610.1016/j.jmatprotec.2007.10.060 ↗
9. Schwertfeger F, Frank D, Schmidt M (1998) Hydrophobic waterglass based aerogels without solvent exchange or supercritical drying. J Non-Cryst Solids 225:24–2910.1016/S0022-3093(98)00102-1 ↗
10. Tang Q, Wang T (2005) Preparation of silica aerogel from rice hull ash by supercritical carbon dioxide drying. J Supercrit Fluids 35:91–9410.1016/j.supflu.2004.12.003 ↗
11. Abbas N, Khalid HR, Ban G, Kim HT, Lee HK (2019) Silica aerogel derived from rice husk: an aggregate replacer for lightweight and thermally insulating cement-based composites. Constr Build Mater 195:312–32210.1016/j.conbuildmat.2018.10.227 ↗
12. Wu X, Fan M, McLaughlin JF, Shen X, G, (2018) A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique. Powder Technol 323:310–32210.1016/j.powtec.2017.10.022 ↗
13. Shi F, Liu JX, Song K, Wang ZY (2010) Cost-effective synthesis of silica aerogels from fly ash via ambient pressure drying. J Non-Cryst Solids 356:2241–224610.1016/j.jnoncrysol.2010.08.005 ↗
14. Lee YR, Soe JT, Zhang S, Ahn JW, Park MB, Ahn WS (2017) Synthesis of nanoporous materials via recycling coal fly ash and other solid wastes: a mini review. Chem Eng J 317:821–84310.1016/j.cej.2017.02.124 ↗
15. Nazriati N, Setyawan H, Affandi S, Yuwana M, Winardi S (2014) Using bagasse ash as a silica source when preparing silica aerogels via ambient pressure drying. J Non-Cryst Solids 400:6–1110.1016/j.jnoncrysol.2014.04.027 ↗
16. Rahman NA, Widhiana I, Juliastuti SR, Setyawan H (2015) Synthesis of mesoporous silica with controlled pore structure from bagasse ash as a silica source. Colloid Surf A-Physicochem Eng Asp 476:1–710.1016/j.colsurfa.2015.03.018 ↗
17. Muljani S, Setyawan H, Wibawa G, Altway A (2014) A facile method for the production of high-surface-area mesoporous silica gels from geothermal sludge. Adv Powder Technol 25:1593–159910.1016/j.apt.2014.05.012 ↗
18. Cheng Y, Xia M, Luo F, Li N, Guo C, Wei C (2016) Effect of surface modification on physical properties of silica aerogels derived from fly ash acid sludge. Colloid Surf A-Physicochem Eng Asp 490:200–20610.1016/j.colsurfa.2015.11.055 ↗
19. Mirzaee SS, Salahi E, Khanlarkhani A (2018) Modelling and optimisation of sodium silicate based silica aerogel synthesis using response surface methodology. Micro Nano Lett 13:853–85610.1049/mnl.2018.0093 ↗
20. Liu SW, Wei Q, Cui SP, Nie ZR, Du MH, Li QY (2015) Hydrophobic silica aerogel derived from wheat husk ash by ambient pressure drying. J Sol-Gel Sci Technol 78:60–6710.1007/s10971-015-3928-5 ↗
21. Ller RK (1980) The chemistry of silica. Wiley-Interscience 3: 213–220
22. Shi HX, Cui JT, Shen HM, Wu HK (2014) Preparation of silica aerogel and its adsorption performance to organic molecule. Adv Mater Sci Eng 2014:1–8
23. Firoozmandan M, Moghaddas J, Yasrebi N (2016) Performance of water glass-based silica aerogel for adsorption of phenol from aqueous solution. J Sol-Gel Sci Technol 79:67–7510.1007/s10971-016-4007-2 ↗
24. Huber L, Zhao S, Malfait WJ, Vares S, Koebel MM (2017) Fast and minimal-solvent production of superinsulating silica aerogel granulate. Angew Chem Int Ed Engl 56:4753–475610.1002/anie.201700836 ↗
25. Shen J, Wang JC, Ni XY, Wang B, Zhang ZH (2009) Preparation of silica aerogels with non-ionic exchange water glass. J Funct Mater 40:149–152
26. Pooter S, Latré S, Desplentere F, Seveno D (2018) Optimized synthesis of ambient pressure dried thermal insulating silica aerogel powder from non-ion exchanged water glass. J Non-Cryst Solids 499:217–22610.1016/j.jnoncrysol.2018.07.028 ↗
27. Slosarczyk A (2021) Carbon fiber-silica aerogel composite with enhanced structural and mechanical properties based on water glass and ambient pressure drying. Nanomaterials 11:1–1410.3390/nano11020258 ↗
28. Sahin I, Ozbakir Y, Inonu Z, Ulker Z, Erkey C (2018) Kinetics of supercritical drying of gels. Gels 4:1–29
29. Shewale PM, Rao AV, Rao AP (2008) Effect of different trimethyl silylating agents on the hydrophobic and physical properties of silica aerogels. Appl Surf Sci 254:6902–690710.1016/j.apsusc.2008.04.109 ↗
30. Stojanovic A, Comesaña SP, Rentsch D, Koebel MM, Malfait WJ (2019) Ambient pressure drying of silica aerogels after hydrophobization with mono-, di- and tri-functional silanes and mixtures thereof. Microporous Mesoporous Mat 284:289–29510.1016/j.micromeso.2019.04.038 ↗
31. Sert Cok S, Koc F, Gi Zli N (2021) Lightweight and highly hydrophobic silica aerogels dried in ambient pressure for an efficient oil/organic solvent adsorption. J Hazard Mater 408:1–1310.1016/j.jhazmat.2020.124858 ↗
32. Li Z, Cheng X, He S, Shi X, Gong L, Zhang H (2016) Aramid fibers reinforced silica aerogel composites with low thermal conductivity and improved mechanical performance. Colloid Surf A Physicochem Eng Asp 84:316–325
33. Brunauer S, Emmet PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–31910.1021/ja01269a023 ↗
34. Barrett EP, Joyner LG, Halenda PP (1951) The determination of pore volume and area distributions in porous substances. I. computations from nitrogen isotherms. J Am Chem Soc 73:373–38010.1021/ja01145a126 ↗
35. Kesserwan F, Ahmad MN, Khalil M, El-Rassy H (2020) Hybrid CaO/Al2O3 aerogel as heterogeneous catalyst for biodiesel production. Chem Eng J 385:1–1310.1016/j.cej.2019.123834 ↗
36. Baumann TF, Gash AE, Chinn SC, Sawvel AM, Maxwell RS, Satcher JH (2005) Synthesis of high-surface-area alumina aerogels without the use of alkoxide precursors. Chem Mat 17:395–40110.1021/cm048800m ↗
37. Abolghasemi Mahani A, Motahari S, Mohebbi A (2018) Sol-gel derived flexible silica aerogel as selective adsorbent for water decontamination from crude oil. Mar Pollut Bull 129:438–44710.1016/j.marpolbul.2017.10.012 ↗
38. Mojumdar SC, Raki L (2006) Preparation, thermal, spectral and microscopic studies of calcium silicate hydrate–poly(acrylic acid) nanocomposite materials. J Therm Anal Calorim 85:99–10510.1007/s10973-005-7353-9 ↗
39. Ding F, Gao M, Shen T, Zeng H (2018) Comparative study of organo-vermiculite, organo-montmorillonite and organo-silica nanosheets functionalized by an ether-spacer-containing Gemini surfactant: Congo red adsorption and wettability. Chem Eng J 349:388–39610.1016/j.cej.2018.05.095 ↗
40. Liu H, Sun Z, Yang J, Ji Y (2021) A novel method for semi-quantitative analysis of hydration degree of cement by 1H low-field NMR. Cem Concr Res 141:1–1110.1016/j.cemconres.2020.106329 ↗
41. Bargozin H, Moghaddas JS (2013) Stability of nanoporous silica aerogel dispersion as wettability alteration agent. J Dispers Sci Technol 34:1454–146410.1080/01932691.2012.738128 ↗
42. Luo Z, Yang G, Zhang M, Wang Y, Si Z, Mu Y, Liu X (2022) Effect of residual Na+ on the properties of aerogel prepared with sodium silicate via APD. J Non-Cryst Solids 575:1–910.1016/j.jnoncrysol.2021.121200 ↗
43. Pierre AC, Pajonk G (2002) Chemistry of aerogels and their applications. Chem Rev 102:4243–426510.1021/cr0101306 ↗
44. Chen LJ, Dou LY (2013) Introduction of product structure stability of silicate binder. New Build Mater 10:22–24
45. Lebedev AE, Menshutina NV, Khudeev II, Kamyshinsky RA (2021) Investigation of alumina aerogel structural characteristics at different precursor-water-ethanol ratio. J Non-Cryst Solids 553:1–910.1016/j.jnoncrysol.2020.120475 ↗