journal article·2023-02

Multi-dimensional research on material and processing technology of bearings under multi-working conditions

Lai Hu, Jun Zha, Dongfeng Wang, Yaolong Chen

Journal of Materials Science· Volume 58· Issue 7
Publisher page

Abstract

Bearing is one of the essential and important components in high-end equipment. In this study, the spindle precision bearings, RV reducer thin-walled bearings and high-speed rail bearings produced by different manufacturers were used as research carriers. The element content, grain size, grain boundary morphology, metamorphic layer and hardness of the bearing raceway, fatigue life test for 42 h were compared and analyzed. The theoretical model of influencing factors of bearing service life was deduced, and the raw materials, processing technology and service life of bearing were discussed in multiple dimensions. The following conclusions were obtained: (a) The bearings produced by German and Japanese manufacturers were more accurately controlled in heat treatment of the raw material and ultra-precision machining process. (b) The bearings produced by Chinese and American manufacturers have their own advantages in service life. (c) With the increase of torque, friction factor and wear amount will increase, wear resistance and fatigue life of bearings will decrease. (d) With the increase of the hardness of the bearing raceway, the wear amount will decrease, the wear resistance and the fatigue life will increase. (e) With the decrease of the metamorphic layer in the bearing raceway, the compressive stress will increase, the wear amount will decrease, and the wear resistance and the fatigue life will increase. Through the analysis of this study, we hope to provide product quality control methods for bearing enterprises.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Engineering Technology and Methodologies · Manufacturing Process and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Zheng P, Wang H, Sang Z et al (2018) Smart manufacturing systems for Industry 4.0: conceptual framework, scenarios, and future perspectives. Front Mech Eng 13:137–15010.1007/s11465-018-0499-5 ↗
2. Li D, Li PQ, Wang PQ (2021) Long march 5: flagship of China’s new generation carrier rocket. Aerospace China 06:11–17
3. Li D, Li PQ, Wang J, Huang B, Liu B (2021) General scheme and key technologies of Long March 5 launch vehicle. J Deep Space Explor 8(4):335–343
4. Sun L, Li A (2016) Rolling-element bearings in China: from ancient times to the 20th century. Front Mech Eng 11:33–4310.1007/s11465-016-0373-2 ↗
5. Harris TA, Barnsby RM, Kotzalas MN (2001) A method to calculate frictional effects in oil-lubricated ball bearings. Tribol Trans 44(4):704–70810.1080/10402000108982514 ↗
6. Harris T, Mindel M (1973) Rolling element bearing dynamics. Wear 23(3):311–337. https://doi.org/10.1016/0043-1648(73)90020-310.1016/0043-1648(73)90020-3 ↗
7. Jones A (1960) A general theory for elastically constrained ball and radial roller bearings under arbitrary load and speed conditions. J Basic Eng 82(2):309–320. https://doi.org/10.1115/1.366258710.1115/1.3662587 ↗
8. Poplawski J (1972) Slip and cage forces in a high-speed roller bearing. J Lubri Tech 94(2):143–15010.1115/1.3451660 ↗
9. Rumbarger J, Filetti E, Gubernick D (1973) Gas turbine engine mainshaft roller bearing-system analysis. J Lubri Tech 95(4):401–416. https://doi.org/10.1115/1.345184310.1115/1.3451843 ↗
10. Sun J, Wood R, Ling W, Care I, Powrie HEG (2005) Wear monitoring of bearing steel using electrostatic and acoustic emission techniques. Wear 259(7):1482–1489. https://doi.org/10.1016/j.wear.2005.02.02110.1016/j.wear.2005.02.021 ↗
11. Zhiqiang Y, Zhenguo Y (2007) Failure analysis on excess wear of rolling bearing of motors for supply blower. Lubri Eng 32:5
12. Zhang Q, Luo J, Chen C, Zeng Z, Jin Q, Xu J (2019) Experimental study on skid damage of rolling bearing. Lubri Eng 44(9):64–69
13. Walters CT (1971) The dynamics of ball bearings. J Lubri Tech 93(1):1–10. https://doi.org/10.1016/0043-1648(72)90165-210.1016/0043-1648(72)90165-2 ↗
14. TE Geer, JW Kannel, RD Stockwell, CT Walters, WRD Wilson (1969) Study of high-speed angular-contact ball bearings under dynamic load. NASA Tech Brief 69-10367
15. Gupta PK (1975) Transient ball motion and skid in ball bearings. J Lubri Tech 97(2):261–269. https://doi.org/10.1115/1.345256810.1115/1.3452568 ↗
16. Gupta PK (1983) Some dynamic effects in high-speed solid-lubricated ball bearings. Asle Trans 26(3):393–400. https://doi.org/10.1080/0569819830898151810.1080/05698198308981518 ↗
17. Gupta PK (2012) Advanced dynamics of rolling elements. Springer Sci Bus Media. https://doi.org/10.1115/1.317184710.1115/1.3171847 ↗
18. Gupta P, Winn L, Wilcock D (1977) Vibrational characteristics of ball bearings. J Lubri Tech 99(2):284–287. https://doi.org/10.1115/1.345307810.1115/1.3453078 ↗
19. Zhang Fangyuan (2019) Study on microstructure and wear resistance of the metamorphic layer of GCr15 bearing steel in hard cutting. Dalian Uni of Tech
20. Cong M, Xiangming H, Yuelin Li, Zhixiong Z (2010) Characteristics of affected layer in surface grinding of hardened bearing steel. Nanotech Prec Eng 8(04):356–361. https://doi.org/10.3788/HPLPB20102208.178010.3788/HPLPB20102208.1780 ↗
21. Mingwei F (2007) Failure analysis of skidding damage of rear bearing aero-engine main shaft. Guizhou Uni
22. Chunyan H, Xinling L, Ying L (2011) Failure analysis on main fuel pump bearing of engine. Heat Treat Met s1:64–67
23. Chen X, Rowe W, Mccormack D (2000) Analysis of the transitional temperature for tensile residual stress in grinding. J Mate Proce Tech 107(1–3):216–221. https://doi.org/10.1016/S0924-0136(00)00692-010.1016/S0924-0136(00)00692-0 ↗
24. Fergani O, Shao Y, Lazoglu I (2014) Temperature effects on grinding residual stress. Procedia CIRP 14:2–6. https://doi.org/10.1016/j.procir.2014.03.10010.1016/j.procir.2014.03.100 ↗
25. Kruszyński BW, Wójcik R (2001) Residual stress in grinding. J Mate Proce Tech 109(3):254–257. https://doi.org/10.1016/S0924-0136(00)00807-410.1016/S0924-0136(00)00807-4 ↗
26. Mahdi M, Zhang L (1999) Applied mechanics in grinding—part 7: residual stresses induced by the full coupling of mechanical deformation, thermal deformation and phase transformation. Int J Mach Tools Manuf 39(8):1285–1298. https://doi.org/10.1016/S0890-6955(98)00094-710.1016/S0890-6955(98)00094-7 ↗
27. Paul S, Chattopadhyay A (1995) Effects of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding steels. Cryogenics 35(8):515–523. https://doi.org/10.1016/0011-2275(95)98219-Q10.1016/0011-2275(95)98219-Q ↗
28. Ata B, Ig A, Fg A (2019) Damage models of different hardness layers subjected to point contact. Wear 430–431:157–168
29. Jianguo Gu, Zhang Y, Liu H (2019) Influences of wear on dynamic characteristics of angular contact ball bearings. Meccanica 54(7):945–96510.1007/s11012-019-00996-3 ↗
30. Morales-Espejel GE, Gabelli A (2020) A model for rolling bearing life with surface and subsurface survival: surface thermal effects. Wear. https://doi.org/10.1016/j.wear.2020.20344610.1016/j.wear.2020.203446 ↗
31. Pdw A, Hee B, Cbp B (2011) Investigation into the wear behaviour of Stellite 6 during rotation as an unlubricated bearing at 600°C ScienceDirect. Tribol Int 44(12):1589–1597. https://doi.org/10.1016/j.triboint.2011.02.01110.1016/j.triboint.2011.02.011 ↗
32. Singh P, Upendra P, Joshi K (2014) Fatigue life analysis of thrust ball bearing using ANSYS. Int J Eng Sci Res Technol 3(1):156–162
33. Zeng G, Zhao C, Yu X, Bian Q, Liu B, Xiao ZG, Liu BY (2021) Life extension analysis of high speed ball bearing based on multi-parameter coupling. J Mech Sci Technol 35(7):1569–158110.1007/s12206-021-0321-x ↗
34. Kong X, Ding H, Tang J, Hu Z, Chen S (2022) Bearing internal load analysis and fatigue life estimation based on nonlinear dynamic model of a gear system. J Vib Control 28:1635–164210.1177/1077546321998559 ↗
35. Zhou Chang, Qian Jia, Xing Yuan, Chen Yaolong (2017) Main failure mode of oil-air lubricated rolling bearing installed in high speed machining. Tribol Int 112:68–74. https://doi.org/10.1016/j.triboint.2017.03.02410.1016/j.triboint.2017.03.024 ↗
36. Heqin X (2017) Internal load sequence and life analysis of rolling bearing. ZheJiang University China, pp 60–65