The effects of CoAl2O4 on the microstructural evolution of Inconel 718 processed by direct energy deposition
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Mazumder J, Dutta D, Kikuchi N, Ghosh A (2000) Closed loop direct metal deposition: art to part. Opt Lasers Eng 34(4–6):397–414. https://doi.org/10.1016/S0143-8166(00)00072-510.1016/S0143-8166(00)00072-5 ↗
2. Carter LN, Attallah MM, Reed RC (2012) Laser powder bed fabrication of nickel-base superalloys: influence of parameters; characterisation, quantification and mitigation of cracking. Superalloys 2012(6):2826–2834
3. Zhong M, Sun H, Liu W, Zhu X, He J (2005) Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy. Scripta Mater 53(2):159–164. https://doi.org/10.1016/j.scriptamat.2005.03.04710.1016/j.scriptamat.2005.03.047 ↗
4. Kontis P et al (2019) Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys. Acta Mater 177:209–221. https://doi.org/10.1016/j.actamat.2019.07.04110.1016/j.actamat.2019.07.041 ↗
5. Zhang J, Singer RF (2002) Hot tearing of nickel-based superalloys during directional solidification. Acta Mater 50(7):1869–1879. https://doi.org/10.1016/S1359-6454(02)00042-310.1016/S1359-6454(02)00042-3 ↗
6. Yan F, Xiong W, Faierson E (2017) Grain structure control of additively manufactured metallic materials. Materials 10(11):1260. https://doi.org/10.3390/ma1011126010.3390/ma10111260 ↗
7. Zhang D et al (2020) Grain refinement of alloys in fusion-based additive manufacturing processes. Metall Mater Trans A 51(9):4341–4359. https://doi.org/10.1007/s11661-020-05880-410.1007/s11661-020-05880-4 ↗
8. Easton MA, Qian M, Prasad A, StJohn DH (2016) Recent advances in grain refinement of light metals and alloys. Curr Opin Solid State Mater Sci 20(1):13–24. https://doi.org/10.1016/j.cossms.2015.10.00110.1016/j.cossms.2015.10.001 ↗
9. Kelly P, Zhang M-X (2006) Edge-to-edge matching—the fundamentals. Metall and Mater Trans A 37(3):833–83910.1007/s11661-006-0056-4 ↗
10. Bramfitt BL (1970) The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron. Metall Trans 1(7):1987–1995. https://doi.org/10.1007/BF0264279910.1007/BF02642799 ↗
11. Jian F, Bin Y (1982) High temperature alloys for gas turbines: investigation of the surface grain refinement for superalloys castings. Springer, Dordrecht
12. Binczyk F (2009) Macrostructure of IN-713C superalloy after volume modification. Arch Foundry Eng 9(2):105–108
13. Binczyk F, Śleziona J (2010) Effect of modification on the mechanical properties of IN-713C alloy. Arch Foundry Eng 10(1):195–198
14. Binczyk F, Śleziona J, Gradoń P (2011) Modification of the macrostructure of nickel superalloys with cobalt nanoparticles. Composites 1:49–55
15. Martin JH et al (2020) Grain refinement mechanisms in additively manufactured nano-functionalized aluminum. Acta Mater 200:1022–1037. https://doi.org/10.1016/j.actamat.2020.09.04310.1016/j.actamat.2020.09.043 ↗
16. Martin JH, Yahata BD, Hundley JM, Mayer JA, Schaedler TA, Pollock TM (2017) 3D printing of high-strength aluminium alloys. Nature 549(7672):365–369. https://doi.org/10.1038/nature2389410.1038/nature23894 ↗
17. Zhou S et al (2021) Grain-refining of wire arc additive manufactured aluminum alloy with Nb powder addition. Mater Res Express 8(2):026520. https://doi.org/10.1088/2053-1591/abe6d510.1088/2053-1591/abe6d5 ↗
18. Li XP et al (2017) Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility. Acta Mater 129:183–193. https://doi.org/10.1016/j.actamat.2017.02.06210.1016/j.actamat.2017.02.062 ↗
19. Zhou L et al (2021) Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition. Mater Sci Eng, A 823:141679. https://doi.org/10.1016/j.msea.2021.14167910.1016/j.msea.2021.141679 ↗
20. Tan Q et al (2020) A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. Addit Manuf 32:101034. https://doi.org/10.1016/j.addma.2019.10103410.1016/j.addma.2019.101034 ↗
21. Bermingham MJ, StJohn DH, Krynen J, Tedman-Jones S, Dargusch MS (2019) Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Mater 168:261–274. https://doi.org/10.1016/j.actamat.2019.02.02010.1016/j.actamat.2019.02.020 ↗
22. Chen Y, Yang C, Fan C, Zhuo Y, Lin S, Chen C (2020) Grain refinement of additive manufactured Ti-6.5Al-3.5Mo-1.5Zr-0.3Si titanium alloy by the addition of La2O3. Mater Lett 275:128170. https://doi.org/10.1016/j.matlet.2020.12817010.1016/j.matlet.2020.128170 ↗
23. Tedman-Jones SN, McDonald SD, Bermingham MJ, StJohn DH, Dargusch MS (2019) A new approach to nuclei identification and grain refinement in titanium alloys. J Alloy Compd 794:268–284. https://doi.org/10.1016/j.jallcom.2019.04.22410.1016/j.jallcom.2019.04.224 ↗
24. Kennedy J, Davis A, Caballero A, Williams S, Pickering E, Prangnell P (2021) The potential for grain refinement of wire-arc additive manufactured (WAAM) Ti-6Al-4V by ZrN and TiN inoculation. Addit Manuf 40:101928. https://doi.org/10.1016/j.addma.2021.10192810.1016/j.addma.2021.101928 ↗
25. Tiparti D, Ho I-T, Chang K-C, Hsu T-H, Yeh A-C, Tin S (2021) Understanding the effects of CoAl2O4 inoculant additions on microstructure in additively manufactured inconel 718 processed via selective laser melting. Metall Mater Trans A 52(6):2630–2641. https://doi.org/10.1007/s11661-021-06255-z10.1007/s11661-021-06255-z ↗
26. Ho I-T, Chen Y-T, Yeh A-C, Chen C-P, Jen K-K (2018) Microstructure evolution induced by inoculants during the selective laser melting of IN718. Addit Manuf 21:465–471. https://doi.org/10.1016/j.addma.2018.02.01810.1016/j.addma.2018.02.018 ↗
27. Ho I-T et al (2020) Effects of CoAl2O4 inoculants on microstructure and mechanical properties of IN718 processed by selective laser melting. Addit Manuf 35:101328. https://doi.org/10.1016/j.addma.2020.10132810.1016/j.addma.2020.101328 ↗
28. Hsu T-H et al (2020) “Effect of carbide inoculants additions in IN718 fabricated by selective laser melting process”, in superalloys. Cham 2020:982–989. https://doi.org/10.1007/978-3-030-51834-9_9610.1007/978-3-030-51834-9_96 ↗
29. Ho IT, Chang KC, Tiparti D, Yeh AC, Tin S (2021) Insight to agglomeration and chemical reactions of CoAl2O4 inoculants in IN718 processed by selective laser melting. Journal of Alloys and Compounds 883:160753. https://doi.org/10.1016/j.jallcom.2021.16075310.1016/j.jallcom.2021.160753 ↗
30. Lehto P, Romanoff J, Remes H, Sarikka T (2016) Characterisation of local grain size variation of welded structural steel. Weld World 60(4):673–688. https://doi.org/10.1007/s40194-016-0318-810.1007/s40194-016-0318-8 ↗
31. Manvatkar VD, Gokhale AA, Jagan Reddy G, Venkataramana A, De A (2011) Estimation of melt pool dimensions, thermal cycle, and hardness distribution in the laser-engineered net shaping process of austenitic stainless steel. Metall Mater Trans A 42(13):4080–4087. https://doi.org/10.1007/s11661-011-0787-810.1007/s11661-011-0787-8 ↗
32. Manvatkar V, De A, DebRoy T (2015) Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process. Mater Sci Technol 31(8):924–930. https://doi.org/10.1179/1743284714Y.000000070110.1179/1743284714Y.0000000701 ↗
33. Wei HL, Mazumder J, DebRoy T (2015) Evolution of solidification texture during additive manufacturing. Sci Rep 5(1):16446. https://doi.org/10.1038/srep1644610.1038/srep16446 ↗
34. Parimi LL, Ravi GA, Clark D, Attallah MM (2014) Microstructural and texture development in direct laser fabricated IN718. Mater Charact 89:102–111. https://doi.org/10.1016/j.matchar.2013.12.01210.1016/j.matchar.2013.12.012 ↗
35. Zhang Y, Huang B, Li J (2013) Microstructural evolution with a wide range of solidification cooling rates in a Ni-based superalloy. Metall Mat Trans A 44(4):1641–1644. https://doi.org/10.1007/s11661-013-1645-710.1007/s11661-013-1645-7 ↗
36. Ma C, Chen L, Cao C, Li X (2017) Nanoparticle-induced unusual melting and solidification behaviours of metals. Nature Commun. https://doi.org/10.1038/ncomms1417810.1038/ncomms14178 ↗
37. Mukherjee T, Manvatkar V, De A, DebRoy T (2017) Dimensionless numbers in additive manufacturing. J Appl Phys 121(6):064904. https://doi.org/10.1063/1.497600610.1063/1.4976006 ↗
38. Mundra K, Debroy T, Zacharia T, David S (1992) Role of thermophysical properties in weld pool modeling. Weld J 71:313–320
39. Ma C, Zhao J, Cao C, Lin T-C, Li X (2016) Fundamental study on laser interactions with nanoparticles-reinforced metals—part II: effect of nanoparticles on surface tension, viscosity, and laser melting. J Manuf Sci Eng. https://doi.org/10.1115/1.403344610.1115/1.4033446 ↗
40. Ma C, Zhao J, Cao C, Lin T-C, Li X (2016) Fundamental study on laser interactions with nanoparticles-reinforced metals—part i: effect of nanoparticles on optical reflectivity, specific heat, and thermal conductivity. J Manuf Sci Eng. https://doi.org/10.1115/1.403339210.1115/1.4033392 ↗
41. Pantawane MV et al (2021) Spatial variation of thermokinetics and associated microstructural evolution in laser surface engineered IN718: precursor to additive manufacturing. Metall Mater Trans A 52(6):2344–2360. https://doi.org/10.1007/s11661-021-06227-310.1007/s11661-021-06227-3 ↗
42. Wei HL, Elmer JW, DebRoy T (2017) Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy. Acta Mater 126:413–425. https://doi.org/10.1016/j.actamat.2016.12.07310.1016/j.actamat.2016.12.073 ↗
43. David SA, Vitek JM (1989) Correlation between solidification parameters and weld microstructures. Int Mater Rev 34(1):213–245. https://doi.org/10.1179/imr.1989.34.1.21310.1179/imr.1989.34.1.213 ↗
44. Wei HL, Elmer JW, DebRoy T (2016) Origin of grain orientation during solidification of an aluminum alloy. Acta Mater 115:123–131. https://doi.org/10.1016/j.actamat.2016.05.05710.1016/j.actamat.2016.05.057 ↗
45. Zhang D, Zhang P, Liu Z, Feng Z, Wang C, Guo Y (2018) Thermofluid field of molten pool and its effects during selective laser melting (SLM) of Inconel 718 alloy. Addit Manuf 21:567–578. https://doi.org/10.1016/j.addma.2018.03.03110.1016/j.addma.2018.03.031 ↗
46. Yin J et al (2018) Thermal behavior and grain growth orientation during selective laser melting of Ti-6Al-4V alloy. J Mater Process Technol 260:57–65. https://doi.org/10.1016/j.jmatprotec.2018.04.03510.1016/j.jmatprotec.2018.04.035 ↗
47. Schwarz M, Arnold CB, Aziz MJ, Herlach DM (1997) Dendritic growth velocity and diffusive speed in solidification of undercooled dilute Ni-Zr melts. Mater Sci Eng A 226–228:420–424. https://doi.org/10.1016/S0921-5093(96)10656-010.1016/S0921-5093(96)10656-0 ↗
48. Lipton J, Kurz W, Trivedi R (1987) Rapid dendrite growth in undercooled alloys. Acta Metall 35(4):957–964. https://doi.org/10.1016/0001-6160(87)90174-X10.1016/0001-6160(87)90174-X ↗
49. Prasad A et al (2020) Towards understanding grain nucleation under additive manufacturing solidification conditions. Acta Mater 195:392–403. https://doi.org/10.1016/j.actamat.2020.05.01210.1016/j.actamat.2020.05.012 ↗
50. StJohn DH, Qian M, Easton MA, Cao P (2011) The interdependence theory: the relationship between grain formation and nucleant selection. Acta Mater 59(12):4907–4921. https://doi.org/10.1016/j.actamat.2011.04.03510.1016/j.actamat.2011.04.035 ↗
51. Bermingham M, StJohn D, Easton M, Yuan L, Dargusch M (2020) Revealing the mechanisms of grain nucleation and formation during additive manufacturing. JOM 72(3):1065–1073. https://doi.org/10.1007/s11837-020-04019-510.1007/s11837-020-04019-5 ↗
52. Siva Prasad H, Brueckner F, Kaplan AFH (2020) Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition. Addit Manuf 35:101413. https://doi.org/10.1016/j.addma.2020.10141310.1016/j.addma.2020.101413 ↗
53. Siva Prasad H, Brueckner F, Kaplan AFH (2019) Powder catchment in laser metal deposition. J Laser Appl 31:022308. https://doi.org/10.2351/1.509613010.2351/1.5096130 ↗
54. Haley JC, Schoenung JM, Lavernia EJ (2018) Observations of particle-melt pool impact events in directed energy deposition. Addit Manuf 22:368–374. https://doi.org/10.1016/j.addma.2018.04.02810.1016/j.addma.2018.04.028 ↗
55. Haley JC, Schoenung JM, Lavernia EJ (2019) Modelling particle impact on the melt pool and wettability effects in laser directed energy deposition additive manufacturing. Mater Sci Eng A 761:138052. https://doi.org/10.1016/j.msea.2019.13805210.1016/j.msea.2019.138052 ↗
56. Bennett JL, Wolff SJ, Hyatt G, Ehmann K, Cao J (2017) Thermal effect on clad dimension for laser deposited Inconel 718. J Manuf Process 28:550–557. https://doi.org/10.1016/j.jmapro.2017.04.02410.1016/j.jmapro.2017.04.024 ↗
57. Humphreys FJ, Hatherly M (2012) Recrystallization and related annealing phenomena. Elsevier
58. De A, DebRoy T (2011) A perspective on residual stresses in welding. Sci Technol Weld Join 16:204–208. https://doi.org/10.1179/136217111X1297847653778310.1179/136217111X12978476537783 ↗
59. Charpagne M-A, Franchet J-M, Bozzolo N (2018) Overgrown grains appearing during sub-solvus heat treatment in a polycrystalline γ-γ’ Nickel-based superalloy. Mater Des 144. https://doi.org/10.1016/j.matdes.2018.02.04810.1016/j.matdes.2018.02.048 ↗
60. Agnoli A, Bernacki M, Logé R, Franchet J-M, Laigo J, Bozzolo N (2015) Selective growth of low stored energy grains during δ sub-solvus annealing in the Inconel 718 Nickel-based superalloy. Metall Mater Trans A 46:4405–4421. https://doi.org/10.1007/s11661-015-3035-910.1007/s11661-015-3035-9 ↗
61. Bozzolo N, Agnoli A, Souaï N, Bernacki M, Logé RE (2013) Strain induced abnormal grain growth in Nickel base superalloys. Mater Sci Forum 753:321–324. https://doi.org/10.4028/www.scientific.net/MSF.753.32110.4028/www.scientific.net/MSF.753.321 ↗
62. Fahrmann MG, Metzler DA (2020) Abnormal grain growth in the presence of grain boundary pinning precipitates. In: Tin S, Hardy M, Clews J, Cormier J, Feng Q, Marcin J, O’Brien C, Suzuki A (eds) Superalloys 2020. Springer International Publishing, Cham, pp 519–532. https://doi.org/10.1007/978-3-030-51834-9_5110.1007/978-3-030-51834-9_51 ↗
63. Underwood OD, Madison JD, Thompson GB (2017) Emergence and progression of abnormal grain growth in minimally strained Nickel-200. Metals 7:334. https://doi.org/10.3390/met709033410.3390/met7090334 ↗
64. Liu F, Lin X, Yang G, Song M, Chen J, Huang W (2011) Recrystallization and its influence on microstructures and mechanical properties of laser solid formed nickel base superalloy Inconel 718. Rare Met 30:433–438. https://doi.org/10.1007/s12598-011-0319-010.1007/s12598-011-0319-0 ↗
65. Dennis J, Bate PS, Humphreys JF (2007) Abnormal grain growth in metals. Mater Sci Forum 558–559:717–722. https://doi.org/10.4028/www.scientific.net/MSF.558-559.71710.4028/www.scientific.net/MSF.558-559.717 ↗
66. Ghosh S, Choi J (2006) Modeling and experimental verification of transient/residual stresses and microstructure formation in multi-layer laser aided DMD process. J Heat Transfer 128:662–679. https://doi.org/10.1115/1.219403710.1115/1.2194037 ↗
67. Hu YL, Li YL, Zhang SY, Lin X, Wang ZH, Huang WD (2020) Effect of solution temperature on static recrystallization and ductility of Inconel 625 superalloy fabricated by directed energy deposition. Mater Sci Eng A 772:138711. https://doi.org/10.1016/j.msea.2019.13871110.1016/j.msea.2019.138711 ↗
68. Sui S, Tan H, Chen J, Zhong C, Li Z, Fan W, Gasser A, Huang W (2019) The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing. Acta Materialia 164:413–427. https://doi.org/10.1016/j.actamat.2018.10.03210.1016/j.actamat.2018.10.032 ↗
69. Seow CE, Coules HE, Wu G, Khan RHU, Xu X, Williams S (2019) Wire + arc additively manufactured inconel 718: effect of post-deposition heat treatments on microstructure and tensile properties. Mater Des 183:108157. https://doi.org/10.1016/j.matdes.2019.10815710.1016/j.matdes.2019.108157 ↗