Effect of applied stress on creep properties of Sanicro 25 welded joint made with a composition-matched weld filler metal
Source abstract
Abstract
Sanicro 25 is a candidate material for reheaters and superheaters used in 650–700 °C advanced ultra-supercritical power plants. A composition-matched weld filler metal has been developed to join Sanicro 25 tubes through tungsten inert gas welding. Creep tests of the Sanicro 25 welded joint were conducted at 973 K under a stress of 180–240 MPa. The creep lifetime decreased with an increase in applied stress. The welded joint crept at 180 MPa fracture at the base metal (BM) in a mixed fracture type, and voids were the main damage form in the BM, which had low ductility in the welded joint. Creep fractures occurred in the weld metal (WM) in an intergranular manner at 200–240 MPa, with wedge cracks representing the main damage form and a lower creep ductility in WM. The distribution and strengthening mechanism of the nano-MX and nano-Cu phases in the WM of joint were close to those of pure BM after creep. The growth of carbides in the WM was restrained by element B during the 180 MPa creep test, which caused increasingly serious carbide coarsening in the BM. The amount of low misorientation angle boundaries in the WM following the creep substantially increased. Besides, the creep deformation of the welded joint at 180 MPa is dominated by BM, and the change in the weld grain shape is small. For tests under 200–240 MPa, the creep deformation of the welded joint was dominated by the weld, and the shape of the weld grain changed significantly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Chen L, Zhang Y, Li F, Liu X, Guo B, Jin M (2016) Modeling of dynamic recrystallization behavior of 21Cr–11Ni–N–RE lean austenitic heat-resistant steel during hot deformation. Mater Sci Eng A 663:141–15010.1016/j.msea.2016.03.119 ↗
2. Jung S, Jeon C, Jo YH, Choi W, Lee B, Oh Y et al (2016) Effects of tungsten and molybdenum on high-temperature tensile properties of five heat resistant austenitic stainless steels. Mater Sci Eng A 656:190–19910.1016/j.msea.2016.01.022 ↗
3. Zhang Y, Jing H, Xu L, Zhao L, Han Y, Liang J (2017) Microstructure and texture study on an advanced heat-resistant alloy during creep. Mater Charact 130:156–17210.1016/j.matchar.2017.05.037 ↗
4. Zhang Y, Jing H, Xu L, Zhao L, Han Y, Zhao Y (2017) High-temperature deformation and fracture mechanisms of an advanced heat resistant Fe–Cr–Ni alloy. Mater Sci Eng A 686:102–11210.1016/j.msea.2017.01.002 ↗
5. Dymáček P, Dobe F, Kloc L (2017) Small punch testing of Sanicro 25 steel and its correlation with uniaxial tests. Key Eng Mater 734:70–7610.4028/www.scientific.net/KEM.734.70 ↗
6. Jamrozik P, Sozańska M (2013) Characteristics of the structure of welded joints in sanicro 25 steel. Solid State Phenom 212:71–7410.4028/www.scientific.net/SSP.212.71 ↗
7. Rutkowski B, Gil A, Czyrska-Filemonowicz A (2016) Microstructure and chemical composition of the oxide scale formed on the sanicro 25 steel tubes after fireside corrosion. Corros Sci 102:373–38310.1016/j.corsci.2015.10.030 ↗
8. Korzhavyi PA, Sandström R (2015) First-principles evaluation of the effect of alloying elements on the lattice parameter of a 23Cr25NiWCuCo austenitic stainless steel to model solid solution hardening contribution to the creep strength. Mater Sci Eng A 626:213–21910.1016/j.msea.2014.12.057 ↗
9. Mazánová V, Heczko M, Polák J (2018) Fatigue crack initiation and growth in 43Fe–25Ni–22.5Cr austenitic steel at a temperature of 700 °C. Int J Fatigue 114:11–2110.1016/j.ijfatigue.2018.04.033 ↗
10. Heczko M, Esser BD, Smith TM, Beran P, Mazánová V, McComb DW et al (2018) Atomic resolution characterization of strengthening nanoparticles in a new high-temperature-capable 43Fe–25Ni–22.5Cr austenitic stainless steel. Mater Sci Eng A 719:49–6010.1016/j.msea.2018.02.004 ↗
11. Siefert JA, David SA (2014) Weldability and weld performance of candidate austenitic alloys for advanced ultrasupercritical fossil power plants. Sci Technol Weld Joi 19:271–29410.1179/1362171814Y.0000000197 ↗
12. Srinivasan G, Dey HC, Ganesan V, Bhaduri AK, Albert SK, Laha K (2016) Choice of welding consumable and procedure qualification for welding of 304HCu austenitic stainless steel boiler tubes for Indian advanced ultra super critical power plant. Weld World 60:1029–103610.1007/s40194-016-0359-z ↗
13. Zhang W, Wang X, Gong J, Jiang Y, Huang X (2017) Experimental and simulated characterization of creep behavior of P92 steel with prior cyclic loading damage. J Mater Sci Technol 33:1540–154810.1016/j.jmst.2017.09.006 ↗
14. Kang YH, Yan H, Chen RS (2017) Creep behavior and microstructure evolution of sand-cast Mg–4Y–2.3Nd–1Gd–0.6Zr alloy crept at 523–573 K. J Mater Sci Technol 33:79–8910.1016/j.jmst.2016.08.016 ↗
15. Xiao B, Xu L, Zhao L, Jing H, Han Y, Tang Z (2017) Microstructure evolution and fracture mechanism of a novel 9Cr tempered martensite ferritic steel during short-term creep. Mater Sci Eng A 707:466–47710.1016/j.msea.2017.09.086 ↗
16. Tang Z, Jing H, Xu L, Chi D, Zhao L, Han Y et al (2020) Investigation of creep-fatigue crack growth of G115 steel using a novel damage model. Int J Mech Sci 183:10582710.1016/j.ijmecsci.2020.105827 ↗
17. Guguloth K, Roy N (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Mater Sci Eng A 680:388–40410.1016/j.msea.2016.10.112 ↗
18. Sakthivel T, Selvi SP, Laha K (2015) An assessment of creep deformation and rupture behaviour of 9Cr–1.8W–0.5Mo–VNb (ASME grade 92). Mater Sci Eng A 240:61–7110.1016/j.msea.2015.05.068 ↗
19. Sherby OD, Taleff EM (2002) Influence of grain size, solute atoms and second-phase particles on creep behavior of polycrystalline solids. Mater Sci Eng A 322:89–9910.1016/S0921-5093(01)01121-2 ↗
20. Wen J, Tu S, Xuan F, Zhang X, Gao X (2016) Effects of stress level and stress state on creep ductility: evaluation of different models. J Mater Sci Technol 32:695–70410.1016/j.jmst.2016.02.014 ↗
21. Spindler MW (2004) The multiaxial creep ductility of austenitic stainless steels. Fatigue Fract Eng Mater Struct 27:273–28110.1111/j.1460-2695.2004.00732.x ↗
22. Shim J, Kozeschnik E, Jung W, Lee S, Kim D, Suh J, Lee Y, Cho YW (2010) Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels. Calphad 34:105–11210.1016/j.calphad.2010.01.001 ↗
23. Dewar MP, Gerlich AP (2013) Correlation between experimental and calculated phase fractions in aged 20Cr32Ni1Nb austenitic stainless steels containing nitrogen. Metall Mater Trans A 44:627–63910.1007/s11661-012-1457-1 ↗
24. Li H, Jing H, Xu L, Han Y, Zhao L, Yang S et al (2020) Effect of strain rate induced M23C6 distribution on cyclic deformation behavior: cyclic hardening model. Int J Plast 127:10263410.1016/j.ijplas.2019.11.013 ↗
25. Wei RP, Liu H, Gao M (1998) Crystallographic features and growth of creep cavities in a Ni–18Cr–18Fe alloy. Acta Mater 46(1):313–32510.1016/S1359-6454(97)00183-3 ↗
26. Taneike M, Sawada K, Abe F (2004) Effect of carbon concentration on precipitation behavior of M23C6 carbides and MX carbonitrides in martensitic 9Cr steel during heat treatment. Metall Mater Trans A 35:1255–126210.1007/s11661-004-0299-x ↗
27. Sahara R, Matsunaga T, Hongo H, Tabuchi M (2016) Theoretical investigation of stabilizing mechanism by boron in body-centered cubic iron through (Fe, Cr) 23 (C, B) 6 Precipitates. Metall Mater Trans A 47:2487–249710.1007/s11661-016-3397-7 ↗
28. Hsieh C, Wu W (2012) Overview of intermetallic sigma (σ) phase precipitation in stainless steels. ISRN Metall 2012:1–1610.5402/2012/732471 ↗
29. Yvell K, Grehk TM, Hedström P, Borgenstam A, Engberg G (2018) Microstructure development in a high-nickel austenitic stainless steel using EBSD during in situ tensile deformation. Mater Charact 135:228–23710.1016/j.matchar.2017.11.046 ↗
30. Yan J, Gu Y, Sun F, Michinari Y, Zhong Z, Yuan Y, Lu J (2015) Microstructural study in a Fe–Ni-base superalloy during creep-rupture at intermediate temperature. Mat Sci Eng A 639:15–2010.1016/j.msea.2015.04.093 ↗
31. Zhang J, Zhang Y, Xu K (2005) Dependence of stresses and strain energies on grain orientations in FCC metal films. J Cryst Growth 285:427–43510.1016/j.jcrysgro.2005.08.037 ↗
32. Poddar D, Cizek P, Beladi H, Hodgson PD (2015) The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe–30Ni–Nb model austenitic steel. Acta Mater 99:347–36210.1016/j.actamat.2015.08.003 ↗
33. Grube WL, Rouze SR (1963) The origin, growth and annihilation of annealing twins in austenite. Can Metall Q 2:31–5210.1179/cmq.1963.2.1.31 ↗