Wet corrosion of Al 1050 alloy in ethyl bromide-containing environment
Source abstract
Abstract
The natural passivity, or induced by anodizing process, does not always result in an effective corrosion barrier for aluminium when exposed to environments containing specific chemicals that can cause material degradation phenomena with localized corrosion morphology. The present work investigates the effects of ethyl bromide (EtBr), a neutral organic molecule, sometimes used as a fumigant in packaging containers, that has been recently indicated as a possible cause of corrosion in aluminium alloy components. The study was conducted on Al 1050 alloy samples in aqueous solutions of sodium sulphate at increasing EtBr concentrations, ranging from 500 to 8600 ppm. Long-term exposure tests (936 h) and electrochemical experiments (potentiodynamic and potentiostatic polarizations, as well as time-dependent corrosion potential monitoring) were carried out, together with SEM and EDS examinations of the morphology and nature of the corrosion products. The results showed that the alloy undergoes different corrosion behaviours depending on the concentration of EtBr, spanning from passivity at the lowest concentrations to pitting at the highest, passing through the initiation and propagation of crevice at intermediate EtBr contents. A crucial role of the exposure time was detected, tentatively attributed to ethyl bromide hydrolysis in aqueous solution that liberates the bromide anion that is aggressive towards the passive state of aluminium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Lumley R (2011) Fundamentals of aluminium metallurgy production, processing and applications. Woodhead Publishing Limited, Cambridge10.1533/9780857090256 ↗
2. Vargel C (2014) Corrosion of aluminium. Elsevier, Oxford
3. Davis JR (1999) Corrosion of aluminum and aluminum alloys. ASM International, USA10.31399/asm.tb.caaa.9781627082990 ↗
4. Lobnig RE, Siconolfi DJ, Maisano J, Grundmeier O, Sfreckel H, FrankenthaI RP, Stratmann M, Sinclair JD (1996) Atmospheric corrosion of aluminum in the presence of ammonium sulfate particles. J Electrochem Soc 143(4):1175–118210.1149/1.1836615 ↗
5. Bockris JOM, Minevski LV (1993) On the mechanism of the passivity of aluminum and aluminum alloys. J Electroanal Chem 349(1–2):375–41410.1016/0022-0728(93)80186-L ↗
6. Lee E-J, Pyun S-I (1995) The effect of oxide chemistry on the passivity of aluminium surfaces. Corros Sci 37(1):157–16810.1016/0010-938X(94)00127-R ↗
7. Foley RT (1986) Localized corrosion of aluminum alloys—a review. Corrosion 42(5):277–28810.5006/1.3584905 ↗
8. Moshier WC, Davis GD, Ahearn JS (1987) The corrosion and passivity of aluminum exposed to dilute sodium sulfate solutions. Corros Sci 27(8):785–80110.1016/0010-938X(87)90037-0 ↗
9. Hurlen T, Lian H, Ødegard OS, Valand T (1984) Corrosion and passive behaviour of aluminium in weakly acid solution. Electrochim Acta 29(5):579–58510.1016/0013-4686(84)87113-3 ↗
10. Christopher MA (1992) Brett, on the electrochemical behaviour of aluminium in acidic chloride solution. Corros Sci 33(2):203–21010.1016/0010-938X(92)90145-S ↗
11. Lenderink HJW, Linden MVD, De Wit JHW (1993) Corrosion of aluminium in acidic and neutral solutions. Electrochim Acta 38(14):1989–199210.1016/0013-4686(93)80329-X ↗
12. Branzoi V, Golgovici F, Branzoi F (2003) Aluminium corrosion in hydrochloric acid solutions and the effect of some organic inhibitors. Mater Chem Phys 78(1):122–13110.1016/S0254-0584(02)00222-5 ↗
13. Zhang J, Klasky M, Letellier BC (2009) The aluminum chemistry and corrosion in alkaline solutions. J Nucl Mater 384(2):175–18910.1016/j.jnucmat.2008.11.009 ↗
14. Foroulis ZA, Thubrikar MJ (1975) On the kinetics of the breakdown of passivity of preanodized aluminum by chloride ions. J Electrochem Soc 122(10):1296–130110.1149/1.2134003 ↗
15. McCafferty E (2003) Sequence of steps in the pitting of aluminum by chloride ions. Corros Sci 45(7):1421–143810.1016/S0010-938X(02)00231-7 ↗
16. Trueba M, Trasatti SP (2010) Study of Al alloy corrosion in neutral NaCl by the pitting scan technique. Mater Chem Phys 121(3):523–53310.1016/j.matchemphys.2010.02.022 ↗
17. Tomcsányi L, Varga K, Bartik I, Horányi H, Maleczki E (1989) Electrochemical study of the pitting corrosion of aluminium and its alloys-II Study of the interaction of chloride ions with a passive film on aluminium and initiation of pitting corrosion. Electrochim Acta 34(6):855–85910.1016/0013-4686(89)87119-1 ↗
18. Lee WJ, Pyun SI (2000) Effects of sulphate ion additives on the pitting corrosion of pure aluminum in 0.01 M NaCl solution. Electrochim Acta 45(12):1901–191010.1016/S0013-4686(99)00418-1 ↗
19. Kim J-D, Pyun S-I (1995) Effects of electrolyte composition and applied potential on the repassivation kinetics of pure aluminium. Electrochim Acta 40(12):1863–186910.1016/0013-4686(95)94180-3 ↗
20. Rudd WJ, Scully JC (1980) The function of the repassivation process in the inhibition of pitting corrosion on aluminium. Corros Sci 20(5):611–63110.1016/0010-938X(80)90098-0 ↗
21. Comotti IM, Trueba M, Trasatti SP (2013) The pit transition potential in the repassivation of aluminium alloys. Surf Interface Anal 45(10):1575–158410.1002/sia.5270 ↗
22. Szklarska-Smialowska Z (1999) Pitting corrosion of aluminum. Corros Sci 41(9):1743–176710.1016/S0010-938X(99)00012-8 ↗
23. Martin FJ, Cheek GT, O'Grady WE, Natishan PM (2005) Impedance studies of the passive film on aluminium. Corros Sci 47(12):3187–320110.1016/j.corsci.2005.05.058 ↗
24. Böhni H, Uhlig HH (1969) Environmental factors affecting the critical pitting potential of aluminum. J Electrochem Soc 116(7):906–91010.1149/1.2412167 ↗
25. Jeffers PM, Wolfe NL (1997) Hydrolysis of methyl bromide, ethyl bromide, chloropicrin, 1,4-dichloro-2-butene, and other halogenated hydrocarbons, Fumigants 1997 ACS Symposium Series, vol 652, chap 4, pp 32-4110.1021/bk-1997-0652.ch004 ↗
26. Hu YL, Jiang H, Zhu J, Lu M (2011) Facile and efficient hydrolysis of organic halides, epoxides, and esters with water catalyzed by ferric sulfate in a PEG1000-DAIL[BF4]/toluene temperature-dependent biphasic system. New J Chem 35(2):292–29810.1039/C0NJ00454E ↗
27. Mill T, Mabey W (1988) Hydrolysis of organic chemicals. Handb Environ Chem 2:71–111
28. Doughty HW (1917) Hydrolysis of organic halides and the corrosion of metals. J Am Chem Soc 39(12):2685–269210.1021/ja02257a021 ↗
29. Saveant J-M (2006) Elements of molecular and biomolecular electrochemistry. Wiley, New Jersey10.1002/0471758078 ↗
30. Fedurco M, Sartoretti CJ, Augustynski J (2001) Medium effects on the reductive cleavage of the carbon-halogen bond in methyl and methylene halides. J Phys Chem B 105(10):2003–200910.1021/jp003646m ↗
31. Costentin C, Robert M, Saveant J-M (2003) Successive removal of chloride ions from organic polychloride pollutants Mechanisms of reductive electrochemical elimination in aliphatic gem-polychlorides, α, β-polychloroalkenes, and α, β-polychloroalkanes in mildly protic medium. J Am Chem Soc 125:10729–1073910.1021/ja036141t ↗
32. Arnaboldi S, Gennaro A, Isse AA, Mussini PR (2015) The solvent effect on the electrocatalytic cleavage of carbon-halogen bonds on Ag and Au. Electrochim Acta 158:427–43610.1016/j.electacta.2015.01.169 ↗
33. Robbiola L, Queixalos I, Zwick A, Katia Baslé K, Daniel F, Drieux-Daguerre M, Ducom PJF, Fritsch J (2015) Disinfestation of historical buildings-corrosion evaluation of four fumigants on standard metals. J Cult Herit 16(1):15–2510.1016/j.culher.2014.02.004 ↗
34. Svoronost PDN, Bruno TJ (2002) Carbonyl sulfide: a review of its chemistry and properties. Ind Eng Chem Res 41(22):5321–533610.1021/ie020365n ↗
35. Bond EJ, Dumas T, Hobbs S (1984) Corrosion of metals by the fumigant phosphine. J Stored Prod Res 20(2):57–6310.1016/0022-474X(84)90010-9 ↗
36. Simonet J, Peters DG (2004) On the specific use of platinum cathodes to convert primary alkyl halides to alkenes. Electrochem Soc Proc 10:101–104
37. Kulikov SM, Juettner KM (2009) Electrochemical reductive dehalogenation of brominated organic compounds in water-methanol media on a boron doped diamond electrode: bulk electrolysis. Int J Chem Sci 7:625–631
38. Galli R (1969) The formation of tetraethyllead by electrochemical reduction of ethyl bromide. J Electroanal Chem 22:75–8410.1016/S0022-0728(69)80148-8 ↗
39. Badawy WA, Al-Kharafi FM, El-Azab AS (1999) Electrochemical behaviour and corrosion inhibition of Al, Al-6061 and Al–Cu in neutral aqueous solutions. Corros Sci 41(4):709–72710.1016/S0010-938X(98)00145-0 ↗
40. Foley RT, Nguyen TH (1982) the chemical nature of aluminum corrosion: V. energy transfer in aluminum dissolution. J Electrochem Soc 129(3):464–46710.1149/1.2123881 ↗
41. Rehim SSA, Hassan HH, Amin MA (2002) Corrosion and corrosion inhibition of Al and some alloys in sulphate solutions containing halide ions investigated by an impedance technique. Appl Surf Sci 187(3–4):279–29010.1016/S0169-4332(01)01042-X ↗
42. ASTM G1-90 (2014) Standard practice for preparing, cleaning, and evaluation corrosion test specimens. ASTM International, West Conshohocken
43. ASTM G5-14 (2014) Standard reference test method for making potentiodynamic anodic polarization measurements. ASTM International, West Conshohocken
44. Mhedhbi M, Khlif M, Bradai C (2017) Investigations of microstructural and mechanical properties evolution of AA1050 alloy sheets deformed by cold-rolling process and heat treatment annealing. JMES 8(8):2967–2974
45. Stumm W, Morgan JJ (1996) Aquatic chemistry, 3rd edn. Wiley, New York, p 1022
46. Stumm W (1966) Redox potential as an environmental parameter; conceptual significance and operational limitation. 3rd International Conference on Water Pollution Research Munich, Germany, pp 1–16