Atom probe tomography study of austenite formation during heating of a high-formability steel
Source abstract
Abstract
Controlling austenite formation kinetics and its mean chemistry during annealing are two ways to act on the in-use and mechanical properties of high-carbon high-formability steels. Indeed, these characteristics influence austenite stability at room temperature after cooling and are therefore at the origin of potential TRIP effects under mechanical loading. Atom probe tomography analyses and Thermo-Calc/DICTRA calculations were used to understand how austenite forms during 1 °C/s heating of a 0.2 wt% C high-formability steel. The proposed analysis is conducted in the quaternary FeCMnCr system. It is shown that the transformation kinetics can be rationalized from the evolution of interfacial compositions, which are imposed by the operative tie-lines positions in the relevant phase diagrams. This analysis method helps to gain insight on the evolution of phases chemistries upon heating. Good agreement is found between experimental and calculated kinetics, but also between APT-measured and calculated phases chemistries. Mn and Cr partitioning between ferrite and austenite is confirmed during heating. APT also allows for the characterization of segregation on $$\alpha /\gamma$$ interphase boundary, showing that Mn segregation already occurred at 750 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Fonstein N (2015) Advanced high strength sheet steels: physical metallurgy, design, processing, and properties. Springer, New York10.1007/978-3-319-19165-2 ↗
2. Bouaziz O, Zurob H, Huang M (2013) Driving force and logic of development of advanced high strength steels for automotive applications. Steel Res Int. https://doi.org/10.1002/srin.20120028810.1002/srin.201200288 ↗
3. Hayashi S, Hirade T, Masuo H et al (2018) Application of 980 MPa grade advanced high strength steel with high formability. SAE International, Warrendale10.4271/2018-01-0625 ↗
4. Wei R, Enomoto M, Hadian R et al (2013) Growth of austenite from as-quenched martensite during intercritical annealing in an Fe–0.1C–3Mn–1.5Si alloy. Acta Mater 61:697–707. https://doi.org/10.1016/j.actamat.2012.10.01910.1016/j.actamat.2012.10.019 ↗
5. Enomoto M, Hayashi K (2015) Simulation of the growth of austenite during continuous heating in low carbon iron alloys. J Mater Sci 50:6786–6793. https://doi.org/10.1007/s10853-015-9234-310.1007/s10853-015-9234-3 ↗
6. Lai Q, Gouné M, Perlade A et al (2016) Mechanism of austenite formation from spheroidized microstructure in an intermediate Fe–0.1C–3.5Mn steel. Metall Mater Trans A 47:3375–3386. https://doi.org/10.1007/s11661-016-3547-y10.1007/s11661-016-3547-y ↗
7. Castro Cerda FM, Sabirov I, Goulas C et al (2017) Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating. Mater Des 116:448–460. https://doi.org/10.1016/j.matdes.2016.12.00910.1016/j.matdes.2016.12.009 ↗
8. Enomoto M, Hayashi K (2018) Modeling the growth of austenite in association with cementite during continuous heating in low-carbon martensite. J Mater Sci 53:6911. https://doi.org/10.1007/s10853-018-2020-210.1007/s10853-018-2020-2 ↗
9. Chantrenne P, Perez M, Ollat M et al (2019) Diffusion model for austenite formation kinetics during inter-critical annealing of dual-phase steels. Model Simul Mater Sci Eng 27:065007. https://doi.org/10.1088/1361-651x/ab202b10.1088/1361-651x/ab202b ↗
10. Thuillier O, Danoix F, Gouné M, Blavette D (2006) Atom probe tomography of the austenite–ferrite interphase boundary composition in a model alloy Fe–C–Mn. Scr Mater 55:1071–1074. https://doi.org/10.1016/j.scriptamat.2006.03.04010.1016/j.scriptamat.2006.03.040 ↗
11. Gouné M, Drillet J, Maugis P (2005) A model for the formation of austenite during heating in the Fe–C–Mn system. In: Proceedings of an international conference on solid-solid phase transformations in inorganic materials, vol 2, pp 843–848
12. Huyan F, Yan J-Y, Höglund L et al (2018) Simulation of the growth of austenite from as-quenched martensite in medium Mn steels. Metall Mater Trans A 49:1053–1060. https://doi.org/10.1007/s11661-018-4497-310.1007/s11661-018-4497-3 ↗
13. Miyamoto G, Usuki H, Furuhara T (1073K) Effects of Mn, Si and Cr addition on reverse transformation at 1073K from spheroidized cementite structure in Fe–0.6 mass% C alloy. Acta Mater 58:4492–4502. https://doi.org/10.1016/j.actamat.2010.04.04510.1016/j.actamat.2010.04.045 ↗
14. Li Z-D, Miyamoto G, Yang Z-G, Furuhara T (2011) Kinetics of reverse transformation from pearlite to austenite in an Fe-0.6 mass PCT C alloy and the effects of alloying elements. Metall Mater Trans A 42:1586–1596. https://doi.org/10.1007/s11661-010-0560-410.1007/s11661-010-0560-4 ↗
15. Xia Y, Enomoto M, Yang Z et al (2013) Effects of alloying elements on the kinetics of austenitization from pearlite in Fe–C–M alloys. Philos Mag 93:1095–1109. https://doi.org/10.1080/14786435.2012.74448410.1080/14786435.2012.744484 ↗
16. Raabe D, Herbig M, Sandlöbes S et al (2014) Grain boundary segregation engineering in metallic alloys: a pathway to the design of interfaces. Curr Opin Solid State Mater Sci 18:253–261. https://doi.org/10.1016/j.cossms.2014.06.00210.1016/j.cossms.2014.06.002 ↗
17. Raabe D, Ponge D, Kirchheim R et al (2013) Interface segregation in advanced steels studied at the atomic scale. In: Molodov DA (ed) Microstructural design of advanced engineering materials. https://doi.org/10.1002/9783527652815.ch1110.1002/9783527652815.ch11 ↗
18. Dmitrieva O, Ponge D, Inden G et al (2011) Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation. Acta Mater 59:364–374. https://doi.org/10.1016/j.actamat.2010.09.04210.1016/j.actamat.2010.09.042 ↗
19. Toji Y, Matsuda H, Herbig M et al (2014) Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy. Acta Mater 65:215–228. https://doi.org/10.1016/j.actamat.2013.10.06410.1016/j.actamat.2013.10.064 ↗
20. Kwiatkowski da Silva A, Inden G, Kumar A et al (2018) Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography. Acta Mater 147:165–175. https://doi.org/10.1016/j.actamat.2018.01.02210.1016/j.actamat.2018.01.022 ↗
21. Gouné M, Aoued S, Danoix F et al (2019) Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C–Mn–Si alloy. Scr Mater 162:181–184. https://doi.org/10.1016/j.scriptamat.2018.11.01210.1016/j.scriptamat.2018.11.012 ↗
22. Pereloma EV, Timokhina IB, Jonas JJ, Miller MK (2006) Fine-scale microstructural investigations of warm rolled low-carbon steels with and without Cr, P, and B additions. Acta Mater 54:4539–4551. https://doi.org/10.1016/j.actamat.2006.05.04010.1016/j.actamat.2006.05.040 ↗
23. Caballero FG, Miller MK, Garcia-Mateo C (2010) Carbon supersaturation of ferrite in a nanocrystalline bainitic steel. Acta Mater 58:2338–2343. https://doi.org/10.1016/j.actamat.2009.12.02010.1016/j.actamat.2009.12.020 ↗
24. Pereloma E, Beladi H, Zhang L, Timokhina I (2012) Understanding the behavior of advanced high-strength steels using atom probe tomography. Metall Mater Trans A 43:3958–3971. https://doi.org/10.1007/s11661-011-0782-010.1007/s11661-011-0782-0 ↗
25. Caballero FG, Miller MK, Garcia-Mateo C, Cornide J (2013) New experimental evidence of the diffusionless transformation nature of bainite. SI ICOMAT 2011 577:S626–S630. https://doi.org/10.1016/j.jallcom.2012.02.13010.1016/j.jallcom.2012.02.130 ↗
26. Langelier B, Van Landeghem HP, Botton GA, Zurob HS (2017) Interface segregation and nitrogen measurement in Fe–Mn–N steel by atom probe tomography. Microsc Microanal 23:385–395. https://doi.org/10.1017/S143192761700015010.1017/S1431927617000150 ↗
27. Van Landeghem HP, Langelier B, Panahi D et al (2016) Solute segregation during ferrite growth: solute/interphase and substitutional/interstitial interactions. JOM 68:1329–1334. https://doi.org/10.1007/s11837-016-1852-y10.1007/s11837-016-1852-y ↗
28. Van Landeghem HP, Langelier B, Gault B et al (2017) Investigation of solute/interphase interaction during ferrite growth. Acta Mater 124:536–543. https://doi.org/10.1016/j.actamat.2016.11.03510.1016/j.actamat.2016.11.035 ↗
29. Andersson J-O, Helander T, Höglund L et al (2002) Thermo-Calc & DICTRA, computational tools for materials science. Calphad 26:273–312. https://doi.org/10.1016/S0364-5916(02)00037-810.1016/S0364-5916(02)00037-8 ↗
30. Thermo-Calc software TCFE9 Steels/Fe-alloys database (accessed on 26.09.2019)
31. Engström A (1998) MOB2 mobility database. Thermo-Calc AB R Inst Technol Stockh
32. Hellman OC, Vandenbroucke JA, Rüsing J et al (2000) Analysis of three-dimensional atom-probe data by the proximity histogram. Microsc Microanal 6:437–444. https://doi.org/10.1007/S10005001005110.1007/S100050010051 ↗
33. Hong MH, Hono K, Reynolds WT, Tarui T (1999) Atom probe and transmission electron microscopy investigations of heavily drawn pearlitic steel wire. Metall Mater Trans A 30:717–727. https://doi.org/10.1007/s11661-999-0063-310.1007/s11661-999-0063-3 ↗
34. Li YJ, Choi P, Goto S et al (2012) Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3GPa hypereutectoid pearlitic steel wire. Acta Mater 60:4005–4016. https://doi.org/10.1016/j.actamat.2012.03.00610.1016/j.actamat.2012.03.006 ↗
35. Philippot C, Hoummada K, Dumont M et al (2015) Influence of a 2-D defect on the partitioning during the formation of a cementite particle in steels. Comput Mater Sci 106:64–68. https://doi.org/10.1016/j.commatsci.2015.04.02010.1016/j.commatsci.2015.04.020 ↗
36. Zhang G-H, Chae J-Y, Kim K-H, Suh DW (2013) Effects of Mn, Si and Cr addition on the dissolution and coarsening of pearlitic cementite during intercritical austenitization in Fe-1 mass %C alloy. Mater Charact 81:56–67. https://doi.org/10.1016/j.matchar.2013.04.00710.1016/j.matchar.2013.04.007 ↗
37. Schindelin J, Arganda-Carreras I, Frise E et al (2012) Fiji: an open-source platform for biological-image analysis. Nat Methods 9:676. https://doi.org/10.1038/nmeth.201910.1038/nmeth.2019 ↗
38. Yang ZN, Enomoto M, Zhang C, Yang ZG (2016) Transition between alloy–element partitioned and non-partitioned growth of austenite from a ferrite and cementite mixture in a high-carbon low-alloy steel. Philos Mag Lett 96:256–264. https://doi.org/10.1080/09500839.2016.119743210.1080/09500839.2016.1197432 ↗
39. Ollat M, Militzer M, Massardier V et al (2018) Mixed-mode model for ferrite-to-austenite phase transformation in dual-phase steel. Comput Mater Sci 149:282–290. https://doi.org/10.1016/j.commatsci.2018.02.05210.1016/j.commatsci.2018.02.052 ↗
40. Crusius S, Inden G, Knoop U et al (1992) On the numerical treatment of moving boundary problems. Z Für Met 83:673–678
41. Gamsjäger E, Svoboda J, Fischer FD (2005) Austenite-to-ferrite phase transformation in low-alloyed steels. Comput Mater Sci 32:360–369. https://doi.org/10.1016/j.commatsci.2004.09.03110.1016/j.commatsci.2004.09.031 ↗
42. Speich GR, Demarest VA, Miller RL (1981) Formation of austenite during intercritical annealing of dual-phase steels. Metall Mater Trans A 12:1419–1428. https://doi.org/10.1007/BF0264368610.1007/BF02643686 ↗
43. Gault B, Danoix F, Hoummada K et al (2012) Impact of directional walk on atom probe microanalysis. Ultramicroscopy 113:182–191. https://doi.org/10.1016/j.ultramic.2011.06.00510.1016/j.ultramic.2011.06.005 ↗
44. Isheim D, Seidman DN (2004) Nanoscale studies of segregation at coherent heterophase interfaces in α-Fe based systems. Surf Interface Anal 36:569–574. https://doi.org/10.1002/sia.170310.1002/sia.1703 ↗
45. Miller MK, Forbes RG (2014) Atom-probe tomography: the local electrode atom probe. Springer, US, Boston, MA10.1007/978-1-4899-7430-3 ↗
46. Kuzmina M, Ponge D, Raabe D (2015) Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9wt% medium Mn steel. Acta Mater 86:182–192. https://doi.org/10.1016/j.actamat.2014.12.02110.1016/j.actamat.2014.12.021 ↗
47. Lejček P, Šob M, Paidar V (2017) Interfacial segregation and grain boundary embrittlement: An overview and critical assessment of experimental data and calculated results. Prog Mater Sci 87:83–139. https://doi.org/10.1016/j.pmatsci.2016.11.00110.1016/j.pmatsci.2016.11.001 ↗