journal article·2020-01

Effect of surface potential on corrosion behavior of the fusion boundary in the dissimilar welds between 316L stainless steels and Inconel 182 alloy

Wei Wang, Yongming Han, Tingguang Liu, Yonghao Lu, Tetsuo Shoji

Journal of Materials Science· Volume 55· Issue 2
Publisher page

Abstract

The microstructure, surface potential value and corrosion properties of fusion boundary in 316L stainless steel/Inconel 182 dissimilar welds were investigated. The results indicated that there were two different types of fusion boundaries alternately distributed in the dissimilar welds, and there was a large potential value difference between two sides of the fusion line in different types of fusion boundaries. The oxides and oxidation behavior of different types of fusion boundaries were strongly dependent on their surface potential value change on the fusion boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Wang HT, Wang GZ, Xuan FZ, Liu CJ, Tu ST (2013) Local mechanical properties of a dissimilar metal welded joint in nuclear power systems. Mater Sci Eng A 568:108–11710.1016/j.msea.2013.01.037 ↗
2. Wang S, Ding J, Ming H, Zhang Z, Wang J (2015) Characterization of low alloy ferritic steel–Ni base alloy dissimilar metal weld interface by SPM techniques, SEM/EDS, TEM/EDS and SVET. Mater Charact 100:50–6010.1016/j.matchar.2014.12.007 ↗
3. Jothi S, Sebald T, Davies HM, Reese ED, Brown SGR (2016) Localized microstructural characterization of a dissimilar metal electron beam weld joint from an aerospace component. Mater Des 90:101–11410.1016/j.matdes.2015.10.119 ↗
4. Jeng S, Chang Y (2013) Microstructure and flow behavior of Ni–Cr–Fe welds with Nb and Mo additions. Mater Sci Eng A 560:343–35010.1016/j.msea.2012.09.077 ↗
5. Seifert HP, Ritter S, Shoji T, Peng QJ, Takeda Y, Lu ZP (2008) Environmentally-assisted cracking behavior in the transition region of an Alloy182/SA 508 Cl.2 dissimilar metal weld joint in simulated boiling water reactor normal water chemistry environment. J Nucl Mater 378:197–21010.1016/j.jnucmat.2008.06.034 ↗
6. Malek Ghaini F, Hamedi MJ, Torkamany MJ, Sabbaghzadeh J (2007) Weld metal microstructural characteristics in pulsed Nd:YAG laser welding. Scr Mater 56:955–95810.1016/j.scriptamat.2007.02.019 ↗
7. Hosseini HS, Shamanian M, Kermanpur A (2011) Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds. Mater Charact 62:425–43110.1016/j.matchar.2011.02.003 ↗
8. Sayiram G, Arivazhagan N (2015) Microstructural characterization of dissimilar welds between Incoloy 800H and 321 Austenitic Stainless Steel. Mater Charact 102:180–18810.1016/j.matchar.2015.03.006 ↗
9. Wang K, Wang JH, Hu WB (2015) Evaluation of temperature effect on the corrosion process of 304 stainless steel in high temperature water with electrochemical noise. Mater Des 82:155–16310.1016/j.matdes.2015.05.044 ↗
10. Kim J, Kim SH, Choi KJ, Bahn CB, Hwang S, Kim JH (2014) In-situ investigation of thermal aging effect on oxide formation in Ni-base alloy/low alloy steel dissimilar metal weld interfaces. Corros Sci 86:295–30310.1016/j.corsci.2014.06.006 ↗
11. Sireesha M, Albert Shaju K, Shankar V, Sundaresan S (2000) A comparative evaluation of welding consumables for dissimilar welds between 316LN austenitic stainless steel and Alloy 800. J Nucl Mater 279:65–7610.1016/S0022-3115(99)00275-5 ↗
12. Naffakh H, Shamanian M, Ashrafizadeh F (2008) Weld ability in dissimilar welds between type 310 austenitic stainless steel and alloy 657. J Mater Process Technol 36:28–39
13. Kim JW, Lee K, Kim JS, Byun TS (2009) Local mechanical properties of Alloy 82/182 dissimilar weld joint between SA508 Gr.1a and F316 SS at RT and 320 °C. J Nucl Mater 384:212–22110.1016/j.jnucmat.2008.11.019 ↗
14. Jang C, Lee J, Kim JS, Jin TE (2008) Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel. Int J Pres Ves Pip 85:635–64610.1016/j.ijpvp.2007.08.004 ↗
15. Wang W, Lu YH, Ding XF, Shoji T (2015) Microstructures and microhardness at fusion boundary of 316 stainless steel/Inconel 182 dissimilar welding. Mater Charact 107:255–26110.1016/j.matchar.2015.07.018 ↗
16. Hou J, Peng QJ, Takeda Y, Kuniya J, Shoji T, Wang JQ, Han EH, Ke W (2010) Microstructure and mechanical property of the fusion boundary region in an Alloy 182-low alloy steel dissimilar weld joint. J Mater Sci 45:5332–5338. https://doi.org/10.1007/s10853-010-4581-610.1007/s10853-010-4581-6 ↗
17. Hou J, Peng QJ, Takeda Y, Kuniya J, Shoji T, Wang JQ, Han EH, Ke W (2010) Microstructure and stress corrosion cracking of the fusion boundary region in an Alloy 182-A533B low alloy steel dissimilar weld joint. Corros Sci 52:3949–395410.1016/j.corsci.2010.08.002 ↗
18. Nisbitt HW, Legrand D, Bancroft GM (2000) Interpretation of Ni2p XPS spectra of Ni conductors and Ni insulators. Phys Chem Miner 27:357–36610.1007/s002690050265 ↗
19. Sennour M, Marchetti L, Martin F, Perrin S, Molins R, Pijolat M (2010) A detailed TEM and SEM study of Ni-base alloys oxide scales formed in primary conditions of pressurized water reactor. J Nucl Mater 402:147–15610.1016/j.jnucmat.2010.05.010 ↗
20. Lacroix L, Ressier L, Blanc C, Mankowski G (2008) Combination of AFM, SKPFM, and SIMS to study the corrosion behavior of s-phase particles in AA2024-T351. J Electrochem Soc 155:C131–C13710.1149/1.2833315 ↗
21. Sathirachinda N, Pettersson R, Pan JS (2009) Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS. Corros Sci 51:1850–186010.1016/j.corsci.2009.05.012 ↗
22. Ramírez-Salgado J, Domínguez-Aguilar MA, Castro-Domínguez B, Hernández-Hernández P, Newman RC (2013) Detection of secondary phases in duplex stainless steel by magnetic force microscopy and scanning Kelvin probe force microscopy. Mater Chem 86:250–262
23. Femenia M, Canalias C, Pan J, Leygraf C (2003) Scanning Kelvin probe force microscopy and magnetic force microscopy for characterization of duplex stainless steels. J Electrochem Soc 150:B274–B28110.1149/1.1572482 ↗
24. Sun H, Wu XQ, Han EH (2009) Effects of temperature on the protective property, structure and composition of the oxide film on Alloy 625. Corros Sci 51:2565–257210.1016/j.corsci.2009.06.043 ↗
25. Kuang WJ, Wu XQ, Han EH, Rao JC (2011) Effect of alternately changing the dissolved Ni ion concentration on the oxidation of 304 stainless steel in oxygenated high temperature water. Corros Sci 53:2582–259110.1016/j.corsci.2011.04.016 ↗
26. Abd El Aal EE (2003) Breakdown of passive film on nickel in borate solutions containing halide anions. Corros Sci 45:759–77510.1016/S0010-938X(02)00180-4 ↗
27. Meng G, Sun F, Shao Y, Zhang T, Wang F, Dong C, Li X (2010) Effect of phytic acid on the microstructure and corrosion resistance of Ni coating. Electrochim Acta 55:5990–599510.1016/j.electacta.2010.05.054 ↗
28. Kuang WJ, Wu XQ, Han EH, Rao JC (2011) The mechanism of oxide film formation on Alloy 690 in oxygenated high temperature water. Corros Sci 53:3853–386010.1016/j.corsci.2011.07.038 ↗