journal article·2019-02Open access

Microstructural studies of ultrarapidly quenched foils of zinc-doped indium–tin eutectic alloys

Vasiliy G. Shepelevich, Olga V. Gusakova, Elena L. Koukharenko, Sofia V. Husakova

Journal of Materials Science· Volume 54· Issue 3

Abstract

Alloys with the composition of Sn (46.5 at.%)–In (50.7 at.%)–Zn (2.8 at.%) were fabricated by using the ultrarapid quenching process, with quenching rate up to 105 K/s. These materials were obtained in the shape of foils with a thickness varying from 30 to 70 µm. Their phase composition, microstructure, grain structure, and texture have been analyzed and revealed that these alloys consist of solid solutions based on the β phase (In3Sn) and γ phase (InSn4) with inclusions of zinc. Aging processes in the foils revealed that the volume fraction of zinc (VZn) increases with the increase in the samples exposure time to the air at room temperature. The electron backscatter diffraction analysis has shown that these foils have a microcrystalline structure. The mechanism of the texture formation in these materials has been explained.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Zeng K et al (2002) Six cases of reliability study of Pb free solder joints in electronic packaging electronic. Mater Sci Eng 38:55–10510.1016/S0927-796X(02)00007-4 ↗
2. Tu KN et al (2003) Physics and materials challenges for lead-free solders. J Appl Phys 93:1335–135310.1063/1.1517165 ↗
3. Nadia A (2009) The fabrication of composite solder by addition of copper nano powder into Sn–3.5Ag solder. In: Proceedings of the international conference on electronic packaging technology & high density packaging (ICEPT-HDP’09), pp 607–61010.1109/ICEPT.2009.5270678 ↗
4. Bath J ed (2007) Lead-free soldering, Springer, Chapter 2: fundamental properties of Pb-free solder alloys10.1007/978-0-387-68422-2 ↗
5. O’Neill T (2018) Life after SAC http://www.aimsolder.com/Accessed . Accessed May 15 2018
6. Chen ZG, Shi YW, Xia ZD, Yan YF (2002) Study on the microstructure of a novel lead-free solder alloy SnAgCu–RE and its soldered joints. J Electron Mater 31(10):1122–112810.1007/s11664-002-0052-4 ↗
7. Lii Q, Leii Y, Lin J, Yangi S (2015) Design and properties of Sn–Bi–In low-temperature solders. In: Proceedings of the 16th international conference on electronic packaging technology, pp 497–50010.1109/ICEPT.2015.7236635 ↗
8. Hindler Michael, Guo Zhongnan, Mikula Adolf (2012) Lead-free solder alloys: thermodynamic properties of the (Au + Sb + Sn) and the (Au + Sb) system. J Chem Thermodyn 55:102–10910.1016/j.jct.2012.06.024 ↗
9. Maruya Y, Hata H, Shohji I, Koyama S (2017) Fabrication of high melting point joint using Sn–57Bi–1Ag low temperature lead-free solder and gold-plated electrode. In: ICEP proceedings, pp 551–55410.23919/ICEP.2017.7939445 ↗
10. Anryushchenko M (2004) Lead-free soldering. Altern Alloys Electron Sci Technol Bus 5:47–49
11. Al-Ganainy GS (2002) Creep characteristics of a new Pb-free soldering Sn–In pewter. Phys Status Solidi 193(2):226–23510.1002/1521-396X(200209)193:2<226::AID-PSSA226>3.0.CO;2-O ↗
12. Shen J, Wu CP, Li SZ (2012) Effects of rare earth additions on the microstructural evolution and microhardness of Sn30Bi0.5Cu and Sn35Bi1Ag solder alloys. J Mater Sci Mater Electron 23(1):156–16310.1007/s10854-011-0566-8 ↗
13. Song Jenn-Ming, Zong-Mou Wu (2006) Variable eutectic temperature caused by inhomogeneous solute distribution in Sn–Zn system. Scr Mater 54:1479–148310.1016/j.scriptamat.2005.12.056 ↗
14. Vasiliev VA, Mitin BS, Pashkov IN, Serov MM, Skuridin AA, Lukin AA, Yakovlev VB (1998) Rapid solidification of melts (theory, technology and materials). SP Intermet Engineering, Moscow (in Russian)
15. Miroshnichenko IS (1982) Hardening from the liquid state. Metallurgy, Moscow
16. Shepelevich VG (2015) Rapidly solidified low-melting alloys. BSU, Minsk
17. Pashkov IN, Pikinov MV, Tavolzhansky SA, Pashkov AI (2010) Developmen of production and use of solder alloys microcrystalline or amorphous structure. Metallurgist 6:43–45
18. Pashkov N, Pikunov MV, Tavolzhanskii SA, Pashkov AI (2010) Development of processes for preparation and use of solder alloys in a dispersed state with a microcrystalline or amorphous structure. Metallurgist 54(5–6):358–36110.1007/s11015-010-9303-4 ↗
19. Kalin BA, Fedotov VT, Seryukov ON et al (1996) Amorphous solder tape for high-temperature soldering. Experience of developing production technology and application. Svar Proizv 1:15–19
20. Rusakov AA (1977) Radiography of metals. Atomizdat, Moscow
21. Saltykov SA (1976) Stereometric metallography. Metallurgy, Moscow
22. Vander GeorgeF (1884) Voort metallography, principles and practice. ASM International, Almere
23. Jingjie W, Shepelevich VG (2010) Structure of the fast-hardened β phase of the In–Sn system. Bull Belarusian State Univ Ser 1(3):27–29
24. Jingjie W, Shepelevich VG (2011) Structure and microhardness of the fast-cured γ-phase of the In–Sn system. Wang Jingjie Bull the Belarusian State Univ Ser 1:22–24
25. Ziegler G (1966) Extremal principles of thermodynamics of irreversible processes in continuum mechanics. Mir, Moscow
26. Li DY, Szpunar JA (1994) A possible pole for surface packing density in the formation of (111) texture in solidified FCC metals. J Mater Sci Lett 13:1521–152310.1007/BF00626496 ↗
27. Shepelevich VG, Sivtsova PA, Vasilevich EYu, Gutko ES (2005) Texture of rapidly solidified foils of aluminium and its alloys. J Alloys Compd 403:265–26910.1016/j.jallcom.2004.07.089 ↗
28. Lozenko VV, Shepelevich VG (2006) Rapidlysolifified foils of binary alloys of zinc with cadmium, aluminum, tin and indium. Phys Chem Met Process 4:67–72
29. Gusakova OV, Shepelevich VG (2012) Rapidlysolidified alloys of tin. Minsk PIVSH, Minsk