Stretchable and insulating characteristics of chemically bonded graphene and carbon nanotube composite materials
Source abstract
Abstract
Polyvinyl alcohol (PVA) composite materials made by mixing graphene and carbon nanotubes (CNTs) without chemically bonding them resulted in severe coagulation and deteriorated rigidity and ductility. We succeeded in improving the rigidity and ductility by proposing a G-CNT/PVA material fabricated by combining graphene and CNTs bonded through amide functionality. The proposed G-CNT/PVA has strength, rigidity, and ductility values of 24.0 MPa, 0.99 GPa, and 148.0%, respectively, at a nanocarbon content of 10 wt%. The electric resistance of the proposed G-CNT/PVA composite could be increased drastically by chemical bonding, while the nanocarbon (graphene, CNT) PVA composite materials, which had conventionally been conductive, now had sheet resistances of 87.02–0.300 kΩ/□. The G-CNT/PVA composite was found to have similar strength, rigidity, and ductility to conventional nanocarbon materials, whilst dramatically increasing resistivity; thereby, the G-CNT/PVA can be a suitable candidate for insulators of stretchable devices and conductive nanocarbon materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Raflee MA, Raflee J, Wang Z, Song H, Yu ZZ, Koratkar N (2010) Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano 3:3884–3890
2. Tang LC, Wan YJ, Yan D et al (2013) The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites. Carbon 60:16–2710.1016/j.carbon.2013.03.050 ↗
3. Ogasawara T, Ishida Y, Ishikawa T, Yokota R (2004) Characterization of multi-walled carbon nanotube/phenylethynyl terminated polyimide composites. Compos A 35:67–7410.1016/j.compositesa.2003.09.003 ↗
4. Lee C, Wei X, Kysar JW, Hone J (2008) Measurement of the elastic properties and intrinsic strength of monolayer graphene. Science 321:385–38810.1126/science.1157996 ↗
5. Ogasawara T, Moon SY, Inoue Y, Shimamura Y (2011) Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method. Compos Sci Technol 71:1826–183310.1016/j.compscitech.2011.08.009 ↗
6. Kim NH, Kuila T, Lee JH (2013) Simultaneous reduction, functionalization and stitching of graphene oxide with ethylenediamine for composites application. J Mater Chem A 1:1349–135810.1039/C2TA00853J ↗
7. Kobayashi H, Shioya M, Tanaka T, Irisawa T, Sakurai S, Yamamoto K (2007) A comparative study of fracture behavior between carbon black/poly (ethylene terephthalate) and multiwalled carbon nanotube/poly (ethylene terephthalate) composite films. J Appl Polym Sci 106:152–16010.1002/app.26685 ↗
8. Rogers JA, Someya T, Huang Y (2010) Materials and mechanics for stretchable electronics. Science 327:1603–160710.1126/science.1182383 ↗
9. Matsuzaki R, Tabayashi K (2015) Highly stretchable, global, and distributed local strain sensing line using GaInSn electrodes for wearable electronics. Adv Funct Mater 25:3806–381310.1002/adfm.201501396 ↗
10. Yamada T, Hayamizu Y, Yamamoto Y, Yomogida Y, Izadi-Najafabadi A, Futaba DN, Hata K (2011) A stretchable carbon nanotube strain sensor for human-motion detection. Nat Nanotechnol 6:296–30110.1038/nnano.2011.36 ↗
11. Zhu S, So JH, Mays R, Desai S, Barnes WR, Pourdeyhimi B, Dickey MD (2013) Ultrastretchable fibers with metallic conductivity using a liquid metal alloy core. Adv Funct Mater 23:2308–231410.1002/adfm.201202405 ↗
12. Li T, Huang Z, Suo Z, Lacour SP, Wagner S (2004) Stretchability of thin metal films on elastomer substrates. Appl Phys Lett 85:343510.1063/1.1806275 ↗
13. Wang Y, Chen J, Cao J, Liu Y, Zhu Y, Ouyang JH, Jia D (2014) Graphene/carbon black hybrid film for flexible and high rate performance supercapacitor. J Power Sources 271:269–27710.1016/j.jpowsour.2014.08.007 ↗
14. Stankovich S, Dikin DA, Dommett GHB et al (2006) Graphene-based composite materials. Nature 442:282–28610.1038/nature04969 ↗
15. Cai L, Wang C (2015) Carbon nanotube flexible and stretchable electronics. Nanoscale Res Lett 10:1013
16. Shin MK, Lee B, Kim SH et al (2012) Synergistic toughening of composite fibres by self-alignment of reduced graphene oxide and carbon nanotubes. Nat Commun 3:65010.1038/ncomms1661 ↗
17. Li W, Dichiara A, Bai J (2013) Carbon nanotube–graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites. Compos Sci Technol 74:221–22710.1016/j.compscitech.2012.11.015 ↗
18. Li Y, Yang T, Yu T, Zheng L, Liao K (2011) Synergistic effect of hybrid carbon nanotube–graphene oxide as a nanofiller in enhancing the mechanical properties of PVA composites. J Mater Chem 21:1084410.1039/c1jm11359c ↗
19. Fan Z, Yan J, Zhi L et al (2010) A three-dimensional carbon nanotube/graphene sandwich and its application as electrode in supercapacitors. Adv Mater 22:3723–372810.1002/adma.201001029 ↗
20. Yu D, Dai L (2010) Self-assembled graphene/carbon nanotube hybrid films for supercapacitors. J Phys Chem Lett 1:467–47010.1021/jz9003137 ↗
21. Kholmanov IN, Magnuson CW, Piner R et al (2015) Optical, electrical, and electromechanical properties of hybrid graphene/carbon nanotube films. Adv Mater 27:3053–305910.1002/adma.201500785 ↗
22. Dichiara A, Yuan JK, Yao SH, Sylvestre A, Bai J (2012) Chemical vapor deposition synthesis of carbon nanotube-graphene nanosheet hybrids and their application in polymer composites. J Nanosci Nanotechnol 12:6935–694010.1166/jnn.2012.6573 ↗
23. Lin X, Liu X, Jia J, Shen X, Kim JK (2014) Electrical and mechanical properties of carbon nanofiber/graphene oxide hybrid papers. Compos Sci Technol 100:166–17310.1016/j.compscitech.2014.06.012 ↗
24. Pradhan B, Srivastava SK (2014) Synergistic effect of three-dimensional multi-walled carbon nanotube-graphene nanofiller in enhancing the mechanical and thermal properties of high-performance silicone rubber. Polym Int 63:1219–122810.1002/pi.4627 ↗
25. Yoon J, Hong SY, Lim Y, Lee SJ, Zi G, Ha JS (2014) Design and fabrication of novel stretchable device arrays on a deformable polymer substrate with embedded liquid-metal interconnections. Adv Mater 26:6580–658610.1002/adma.201402588 ↗
26. Hummers WS, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:1339–133910.1021/ja01539a017 ↗
27. Datsyuk V, Kalyva M, Papagelis K, Parthenios J, Tasis D, Siokou A, Kallitsis I, Galiotis C (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon 46:833–84010.1016/j.carbon.2008.02.012 ↗
28. Ramanathan T, Fisher FT, Ruoff RS, Brinson LC (2005) Amino-functionalized carbon nanotubes for binding to polymers and biological systems. Chem Mater 17:1290–129510.1021/cm048357f ↗
29. Wei DC, Liu Y, Wang Y, Zhang H, Huang L, Yu G (2009) Synthesis of N-doped graphene by chemical vapor deposition and its electrical properties. Nano Lett 9:1752–175810.1021/nl803279t ↗
30. Biddinger EJ, von Deak D, Ozkan US (2009) Nitrogen-containing carbon nanostructures as oxygen-reduction catalysts. Top Catal 52:1566–157410.1007/s11244-009-9289-y ↗
31. AIST (2011) Conductive resin prepared by adding extremely small amount of single-walled carbon nanotubes (in Japanese). http://www.aist.go.jp/aist_j/press_release/pr2011/pr20111012_3/pr20111012_3.html . Accessed 27 Dec 2016
32. Shin HJ, Kim KK, Benayad A et al (2009) Efficient reduction of graphite oxide by sodium borohydride and its effect on electrical conductance. Adv Funct Mater 19:1987–199210.1002/adfm.200900167 ↗