Electron backscatter diffraction and performance of a severely deformed steel
Source abstract
Abstract
This study investigated electron backscatter diffraction and performance of ultrafine-grained interstitial-free (IF) steel fabricated by an asymmetric rolling process (ASR). For ASR operations, plastic strain was induced with a thickness reduction of 30% per pass and a roll speed ratio of 1:4 for the lower and upper rolls, respectively. As the number of operations increased, the deformed microstructure developed gradually from a band-like structure, which was observed after a single pass, to almost equiaxed ultrafine grains (~0.7 μm) divided by high-angle boundaries after 4-pass ASR. The mechanical behaviors analyzed by microhardness and tension tests showed that the mechanical strength of the IF steel samples improved with increasing number of ASR operations, which was associated with the structural refinement and textural evolution in the ASR-deformed sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Jin YH, Huh MY, Chung YH (2004) Evolution of textures and microstructures in IF-steel sheets during continuous confined strip shearing and subsequent recrystallization annealing. J Mater Sci 39:5311. doi: 10.1023/B:JMSC.0000039235.76760.0410.1023/B:JMSC.0000039235.76760.04 ↗
2. Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zechetbauer MJ, Zhu YT (2006) Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58:33–3910.1007/s11837-006-0213-7 ↗
3. Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51:881–98110.1016/j.pmatsci.2006.02.003 ↗
4. Tsuji N, Saito Y, Lee SH, Minamino Y (2003) ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials. Adv Eng Mater 5:338–34410.1002/adem.200310077 ↗
5. Song R, Ponge D, Raabe D (2005) Mechanical properties of an ultrafine grained C–Mn steel processed by warm deformation and annealing. Acta Mater 53:4881–489210.1016/j.actamat.2005.07.009 ↗
6. Khorashadizadeh A, Raabe D, Zaefferer S, Rohrer GS, Rollett AD, Winning M (2011) Five-Parameter grain boundary analysis by 3D EBSD of an ultra fine grained CuZr alloy processed by equal channel angular pressing. Adv Eng Mater 13:237–24410.1002/adem.201000259 ↗
7. Khorashadizadeh A, Raabe R, Winning M, Pippan R (2011) Recrystallization and grain growth in ultrafine-grained materials produced by high pressure torsion. Adv Eng Mater 13:245–25010.1002/adem.201000253 ↗
8. Calcagnotto M, Adachi Y, Ponge D, Raabe R (2011) Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging. Acta Mater 59:658–67010.1016/j.actamat.2010.10.002 ↗
9. Orlov D, Pougis A, Lapovok R, Toth L, Timokhina L, Hodgson P, Haldar A, Bhattacharjee D (2013) Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: mechanical properties and deformation textures. Metall Mater Trans A 44:4346–435910.1007/s11661-013-1791-y ↗
10. Hamad K, Ko YG (2016) Effect of deformation path on microstructure, annealing characteristics of ultrafine grained low-carbon steel processed by differential speed rolling method. Metall Mater Trans A 47:2319–233410.1007/s11661-016-3405-y ↗
11. Park JP, Hamad K, Widiantara IP, Ko YG (2015) Strain and crystallographic texture evaluation of interstitial free steel cold deformed by differential speed rolling. Mater Lett 147:38–4110.1016/j.matlet.2015.02.030 ↗
12. Hamad K, Ko YG (2016) A cross-shear deformation for optimizing the strength and ductility of AZ31 magnesium alloys. Sci Rep 6. doi: 10.1038/srep2995410.1038/srep29954 ↗
13. Hamad K, Megantoro RB, Ko YG (2014) Microstructure and texture evolution in low carbon steel deformed by differential speed rolling (DSR) method. J Mater Sci 49:6608–6619. doi: 10.1007/s10853-014-8280-610.1007/s10853-014-8280-6 ↗
14. Loorentz Ko YG (2012) Microstructure evolution and mechanical properties of severely deformed Al alloy processed by differential speed rolling. J Alloys Compd 536S:S122–S12510.1016/j.jallcom.2011.12.009 ↗
15. Tse YY, Liu GL, Duggan BJ (1999) Deformation banding and nucleation of recrystallisation in IF steel. Scr Mater 42:25–3010.1016/S1359-6462(99)00303-6 ↗
16. Zhilyaev ZP, Kim BK, Szpunar JA, Baró MD, Langdon TG (2005) The microstructural characteristics of ultrafine-grained nickel. Mater Sci Eng A 39:377–38910.1016/j.msea.2004.09.030 ↗
17. Saray O, Purcek G, Karaman I, Neindorf T, Maier HJ (2011) Equal-channel angular sheet extrusion of interstitial-free (IF) steel: microstructural evolution and mechanical properties. Mater Sci Eng A 528:6573–658310.1016/j.msea.2011.05.014 ↗
18. Mathis K, Krajnak T, Kuzel R, Gubicza J (2011) Structure and mechanical behaviour of interstitial-free steel processed by equal-channel angular pressing. J Alloys Compd 509:3522–352510.1016/j.jallcom.2010.12.142 ↗
19. Hazra SS, Gadzer AA, Pereloma EV (2009) Stored energy of a severely deformed interstitial free steel. Mater Sci Eng A 524:158–16710.1016/j.msea.2009.06.033 ↗
20. Tamimi S, Ketabchi M, Parvin N (2009) Microstructural evolution and mechanical properties of accumulative roll bonded interstitial free steel. Mater Des 30:2556–256210.1016/j.matdes.2008.09.039 ↗
21. Li BL, Tsuji N, Kamikawa N (2006) Microstructure homogeneity in various metallic materials heavily deformed by accumulative roll-bonding. Mater Sci Eng A 423:331–34210.1016/j.msea.2006.02.028 ↗
22. Yoda R, Shibata K, Morimitsu T, Terada D, Tsuji N (2011) Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing. Scr Mater 65:175–17810.1016/j.scriptamat.2011.02.002 ↗
23. Karavaeva MV, Kiseleva SK, Ganeey AV, Protasova EO, Ganiev MM, Simonova LA, Valiev RZ (2015) Superior strength of carbon steel with an ultrafine-grained microstructure and its enhanced thermal stability. J Mater Sci 50:6730–6738. doi: 10.1007/s10853-015-9227-210.1007/s10853-015-9227-2 ↗
24. Dutel GD, Tingaud D, Langlois P, Dirras G (2012) Nickel with multimodal grain size distribution achieved by SPS: microstructure and mechanical properties. J Mater Sci 47:7735–7743. doi: 10.1007/s10853-012-6670-110.1007/s10853-012-6670-1 ↗
25. Kassner ME (1990) A case for Taylor hardening during primary and steady-state creep in aluminium and type 304 stainless steel. J Mater Sci 25:1997–2003. doi: 10.1007/BF0104575510.1007/BF01045755 ↗
26. Li BL, Godfrey A, Meng QC, Liu Q, Hansen N (2004) Microstructural evolution of IF-steel during cold rolling. Acta Mater 52:1069–108110.1016/j.actamat.2003.10.040 ↗