Conversion reaction mechanisms of cubic bismuth phosphate Bi13.1POδ as cathode in lithium-ion batteries
Source abstract
Abstract
Compounds containing bismuth ions (Bi3+) as cathodes used in lithium-ion batteries based on chemical conversion reaction were supposed to be the most promising cathodes. They were considered to break through the storage capacity because a Bi atom could react with three Li+ ions and simultaneously transfer three electrons at a time during conversion reaction. In the paper, the cubic phase bismuth phosphate Bi13.1POδ as cathode used in lithium-ion batteries was proposed. The results showed that the crystalline Bi13.1POδ with sizes of 2–5 μm synthesized via hydrothermal method possessed excellent capacities and poor cycling stability. The initial discharge and charge capacities reached to 706 and 419 mAh g−1 at current density of 39.06 mA g−1. To improve the cycling stability of the cathode material, the chemical conversion process was focused on investigation. The elemental analyses indicated that the ratio of Bi:P ratio was decreased from 12.98 to 4.00, which suggests that about 8 Bi atoms participated in the reaction. Therefore, the capacities of the material were very high. The reduced Bi transformed from the beginning isolated state to ribbon or plate one, and coated on the surface of the active materials, inhibiting further conversion reaction. Consequently, the cycling stability of the cathode material was less than the capacity performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Wang F, Robert R, Chernova NA et al (2011) Conversion reaction mechanisms in lithium ion batteries: study of the binary metal fluoride electrodes. J Am Chem Soc 133:18828–1883610.1021/ja206268a ↗
2. Tarascon JM, Armand M (2001) Issues and challenges facing rechargeable lithium batteries. Nature 414:359–36710.1038/35104644 ↗
3. Goodenough JB, Kim Y (2010) Challenges for rechargeable Li batteries. Chem Mater 22:587–60310.1021/cm901452z ↗
4. Lai CH, Huang KW, Cheng JH et al (2010) Direct growth of high-rate capability and high capacity copper sulfide nanowire array cathodes for lithium-ion batteries. J Mater Chem 20:6638–664510.1039/c0jm00434k ↗
5. Das B, Reddy M, Subba Rao GV et al (2012) Synthesis and Li-storage behavior of CrN nanoparticles. RSC Adv 2:9022–902810.1039/c2ra21136j ↗
6. Gmitter AJ, Gural J, Amatucci GG (2012) Electrolyte development for improved cycling performance of bismuth fluoride nanocomposite positive electrodes. J Power Sources 217:21–2810.1016/j.jpowsour.2012.05.104 ↗
7. Nitta N, Wu FX, Lee JT et al (2014) Li-ion battery materials: present and future. Mater Today 18:252–26410.1016/j.mattod.2014.10.040 ↗
8. Zhou M, Zhao L, Kitajou A et al (2012) Mechanism on exothermic heat of FeF3 cathode in Li-ion batteries. J Power Sources 203:103–10810.1016/j.jpowsour.2011.12.016 ↗
9. Li T, Ai XP, Yang HX (2011) Reversible electrochemical conversion reaction of Li2O/CuO nanocomposites and their application as high-capacity cathode materials for Li-Ion batteries. J Phys Chem C 115:6167–617410.1021/jp112399r ↗
10. Li T, Chen ZX, Cao YL et al (2012) Transition-metal chlorides as conversion cathode materials for Li-ion batteries. Electrochim Acta 68:202–20510.1016/j.electacta.2012.02.061 ↗
11. Hu BA, Wang XY, Wei QL et al (2013) Bismuth phosphate: a novel cathode material based on conversion reaction for lithium-ion batteries. J Alloys Compd 579:18–2610.1016/j.jallcom.2013.05.049 ↗
12. Ding J, Zhao Y, Cui H et al (2015) Appearance of [110] orientated growth layer on (100) face and exposure of (111) faces of cubic bismuth phosphate crystal. J Cryst Growth 426:248–25410.1016/j.jcrysgro.2015.06.015 ↗
13. Zhereb VP, Kargin YF, Zhereb LA et al (2003) Stable and metastable phase equilibria in the Bi2O3–BiPO4 system. Inorg Mater 39:999–1002
14. Lee SL, Lee CK, Sinclair DC (2005) Synthesis and characterisation of bismuth phosphate-based sillenites. Solid State Ionics 176:393–40010.1016/j.ssi.2004.08.015 ↗
15. Cherian CT, Reddy MV, Haur SC et al (2013) Facile synthesis and Li-storage performance of SnO nanoparticles and microcrystals. RSC Adv 3:3118–312310.1039/c2ra22867j ↗