journal article·2024-05

Tensile properties and fracture behavior of Al–8Si alloy sheets with different Mg under natural aging

Guangdong Wang, Yiran Zhou, Jingyi Cao, Yue Tian

Journal of Materials Science· Volume 59· Issue 17
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Haghdadi N, Zarei-Hanzaki A, Abedi HR, Abou-Ras D, Kawasaki M, Zhilyaev AP (2016) Evolution of microstructure and mechanical properties in a hypoeutectic Al–Si–Mg alloy processed by accumulative back extrusion. Mater Sci Eng, A. 651:269–279. https://doi.org/10.1016/j.msea.2015.10.06610.1016/j.msea.2015.10.066 ↗
2. Liu T, Pei Z, Barton D, Thompson GB, Brewer LN (2022) Characterization of nanostructures in a high pressure die cast Al–Si–Cu alloy. Acta Mater 224:117500. https://doi.org/10.1016/j.actamat.2021.11750010.1016/j.actamat.2021.117500 ↗
3. Saad G, Fayek SA, Fawzy A, Soliman HN, Mohammed G (2010) Deformation characteristics of Al–4043 alloy. Mater Sci Eng, A 527(4–5):904–910. https://doi.org/10.1016/j.msea.2009.09.01810.1016/j.msea.2009.09.018 ↗
4. Wu Y, Liao H (2013) Corrosion behavior of extruded near eutectic Al–Si–Mg and 6063 Alloys. J Mater Sci Technol 29(4):380–386. https://doi.org/10.1016/j.jmst.2013.02.00110.1016/j.jmst.2013.02.001 ↗
5. Mohamed AMA, Samuel FH, S.A. kahtani (2013) Microstructure, tensile properties and fracture behavior of high temperature Al–Si–Mg–Cu cast alloys. Mater Sci Eng, A 577:64–72. https://doi.org/10.1016/j.msea.2013.03.08410.1016/j.msea.2013.03.084 ↗
6. Wu X, Zhang H, Ma Z, Tao T, Gui J, Song W, Yang B, Zhang H (2019) Interactions between Fe-rich intermetallics and Mg-Si phase in Al–7Si–xMg alloys. J Alloys Compd 786:205–214. https://doi.org/10.1016/j.jallcom.2019.01.35210.1016/j.jallcom.2019.01.352 ↗
7. Gupta AK, Lloyd DJ, Court SA (2001) Precipitation hardening in Al–Mg–Si alloys with and without excess Si. Mater Sci Eng, A 316(1–2):11–17. https://doi.org/10.1016/S0921-5093(01)01247-310.1016/S0921-5093(01)01247-3 ↗
8. Shen R, Wang Y, Guo B, Song M (2016) Precipitation sequence of a SiC particle reinforced Al–Mg–Si alloy composite. J Mater Eng Perform 25(11):4631–4636. https://doi.org/10.1007/s11665-016-2370-310.1007/s11665-016-2370-3 ↗
9. Rao JH, Zhang Y, Zhang K, Huang A, Davies CHJ, Wu X (2019) Multiple precipitation pathways in an Al–7Si–0 6Mg alloy fabricated by selective laser melting. Scripta Mater 160:66–69. https://doi.org/10.1016/j.scriptamat.2018.09.04510.1016/j.scriptamat.2018.09.045 ↗
10. Li Z, Zhang Z, Zhou G, Zhao P, Jia Z, Poole WJ (2021) The effect of Mg and Si content on the microstructure, texture and bendability of Al–Mg–Si alloys. Mater Sci Eng, A 814:141199. https://doi.org/10.1016/J.MSEA.2021.14119910.1016/J.MSEA.2021.141199 ↗
11. Yang H, Ji S, Yang W, Wang Y, Fan Z (2015) Effect of Mg level on the microstructure and mechanical properties of die-cast Al–Si–Cu alloys. Mater Sci Eng, A 642:340–350. https://doi.org/10.1016/j.msea.2015.07.00810.1016/j.msea.2015.07.008 ↗
12. Salleh MS, Omar MZ, Syarif J (2015) The effects of Mg addition on the microstructure and mechanical properties of thixoformed Al–5%Si–Cu alloys. J Alloys Compd 621:121–130. https://doi.org/10.1016/j.jallcom.2014.09.15210.1016/j.jallcom.2014.09.152 ↗
13. Hwang JY, Banerjee R, Doty HW, Kaufman MJ (2009) The effect of Mg on the structure and properties of Type 319 aluminum casting alloys. Acta Mater 57(4):1308–1317. https://doi.org/10.1016/j.actamat.2008.11.02110.1016/j.actamat.2008.11.021 ↗
14. Yamamoto K, Takahashi M, Kamikubo Y, Sugiura Y, Iwasawa S, Nakata T, Kamado S (2020) Effect of Mg content on age-hardening response, tensile properties, and microstructures of a T5-treated thixo-cast hypoeutectic Al–Si alloy. Mater Sci Eng, A 798:140089. https://doi.org/10.1016/j.msea.2020.14008910.1016/j.msea.2020.140089 ↗
15. Wang QG, Caceres CH, Griffiths JR (2003) Damage by eutectic particle cracking in aluminum casting alloys A356/357. Metall Mater Trans A 34A(12):2901–2912. https://doi.org/10.1007/s11661-003-0190-110.1007/s11661-003-0190-1 ↗
16. Wang QG, Cáceres CH (1998) The fracture mode in Al–Si–Mg casting alloys. Mater Sci Eng, A 241(1–2):72–82. https://doi.org/10.1016/S0921-5093(97)00476-010.1016/S0921-5093(97)00476-0 ↗
17. Zhang P, Li ZM, Liu BL, Ding WJ (2017) Tensile properties and deformation behaviors of a new aluminum alloy for high pressure die casting. J Mater Sci Technol 33(4):367–378. https://doi.org/10.1016/j.jmst.2016.02.01310.1016/j.jmst.2016.02.013 ↗
18. Huter P, Oberfrank S, Gruen F, Stauder B (2016) High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads. Int J Fatigue 88:142–155. https://doi.org/10.1016/j.ijfatigue.2015.09.01510.1016/j.ijfatigue.2015.09.015 ↗
19. Lee FT, Major JF, Samuel FH (1995) Effect of silicon particles on the fatigue crack growth characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr casting alloys. Metall Mater Trans A 26(6):1553–1570. https://doi.org/10.1007/BF0264760610.1007/BF02647606 ↗
20. Dighe MD, Gokhale AM, Horstemeyer MF (2002) Effect of loading condition and stress state on damage evolution of silicon particles in an Al–Si–Mg-base cast alloy. Metall Mater Trans A 33(3):555–565. https://doi.org/10.1007/s11661-002-0117-210.1007/s11661-002-0117-2 ↗
21. Ma K, Wen H, Hu T, Topping TD, Isheim D, Seidman DN, Lavernia EJ, Schoenung JM (2014) Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy. Acta Mater 62:141–155. https://doi.org/10.1016/j.actamat.2013.09.04210.1016/j.actamat.2013.09.042 ↗
22. Marioara CD, Andersen SJ, Jansen J, Zandbergen HW (2001) Atomic model for GP-zones in a 6082 Al–Mg–Si system. Acta Mater 49(2):321–328. https://doi.org/10.1016/j.actamat.2013.09.04210.1016/j.actamat.2013.09.042 ↗
23. Deschamps A, Livet F, Bréchet Y (1998) Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. Microstructure evolution and mechanical properties. Acta Mater 47(1):281–292. https://doi.org/10.1016/S1359-6454(98)00293-610.1016/S1359-6454(98)00293-6 ↗
24. Guo MX, Zhang Y, Zhang XK, Zhang JS, Zhuang LZ (2016) Non-isothermal precipitation behaviors of Al-Mg-Si-Cu alloys with different Zn contents. Mater Sci Eng, A 669:20–32. https://doi.org/10.1016/j.msea.2016.05.06010.1016/j.msea.2016.05.060 ↗
25. Deschamps A, Brechet Y (1998) Influence of predeformation and ageing of an Al–Zn–Mg alloy—II Modeling of precipitation kinetics and yield stress. Acta Mater 47(1):293–305. https://doi.org/10.1016/S1359-6454(98)00296-110.1016/S1359-6454(98)00296-1 ↗
26. Bardel D, Perez M, Nelias D, Deschamps A, Hutchinson CR, Maisonnette D, Chaise T, Garnier J, Bourlier F (2014) Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy. Acta Mater 62:129–140. https://doi.org/10.1016/j.actamat.2013.09.04110.1016/j.actamat.2013.09.041 ↗
27. Esmaeili S, Lloyd DJ, Poole WJ (2003) A yield strength model for the Al–Mg–Si–Cu alloy AA6111. Acta Mater 51(8):2243–2257. https://doi.org/10.1016/S1359-6454(03)00028-410.1016/S1359-6454(03)00028-4 ↗
28. Conrad H, Ramachandran S, Jung K, Narayan J (2006) Transmission electron microscopy observations on the microstructure of naturally aged Al–Mg–Si alloy AA6022 processed with an electric field. J Mater Sci 41(22):7555–7561. https://doi.org/10.1007/s10853-006-0840-y10.1007/s10853-006-0840-y ↗
29. Maisonnette D, Suery M, Nelias D, Chaudet P, Epicier T (2011) Effects of heat treatments on the microstructure and mechanical properties of a 6061 aluminium alloy. Mater Sci Eng, A 528(6):2718–2724. https://doi.org/10.1016/j.msea.2010.12.01110.1016/j.msea.2010.12.011 ↗
30. Liu G, Zhang GJ, Ding XD, Sun J, Chen KH (2003) Modeling the strengthening response to aging process of heat-treatable aluminum alloys containing plate/disc-or rod/needle-shaped precipitates. Mater Sci Eng, A 344(1–2):113–124. https://doi.org/10.1016/S0921-5093(02)00398-210.1016/S0921-5093(02)00398-2 ↗
31. Nandy S, Kumar Ray K, Das D (2015) Process model to predict yield strength of AA6063 alloy. Mater Sci Eng, A 644(413):424. https://doi.org/10.1016/j.msea.2015.07.07010.1016/j.msea.2015.07.070 ↗
32. Chen R, Xu Q, Guo H, Xia Z, Wu Q, Liu B (2017) Modeling the precipitation kinetics and tensile properties in Al–7Si–Mg cast aluminum alloys. Mater Sci Eng, A 685:403–416. https://doi.org/10.1016/j.msea.2016.12.04210.1016/j.msea.2016.12.042 ↗
33. Wang X, Embury JD, Poole WJ, Esmaeili S, Lloyd DJ (2003) Precipitation strengthening of the aluminum alloy AA6111. Metall Mater Trans A 34(12):2913–2924. https://doi.org/10.1007/s11661-003-0191-010.1007/s11661-003-0191-0 ↗
34. Kucukomeroglu T (2010) Effect of equal-channel angular extrusion on mechanical and wear properties of eutectic Al–12Si alloy. Mater Des 31(2):782–789. https://doi.org/10.1016/j.matdes.2009.08.00410.1016/j.matdes.2009.08.004 ↗
35. Liao H, Wu Y, Zhou K, Yang J (2015) Hot deformation behavior and processing map of Al–Si–Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation. Mater Des 65:1091–1099. https://doi.org/10.1016/j.matdes.2014.08.02110.1016/j.matdes.2014.08.021 ↗
36. Sjölander E, Seifeddine S, Svensson IL (2011) Modelling yield strength of heat treated Al–Si–Mg casting alloys. Int J Cast Met Res 24(6):338–346. https://doi.org/10.1179/1743133611Y.000000002110.1179/1743133611Y.0000000021 ↗
37. Gashti SO, Fattah-alhosseini A, Mazaheri Y, Keshavarz MK (2016) Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding. J Alloys Compd 658:854–861. https://doi.org/10.1016/j.jallcom.2015.11.03210.1016/j.jallcom.2015.11.032 ↗
38. Tian N, Wang GD, Zhou YR, Liu C, Liu K, Zhao G, Zuo L (2021) Formation of phases and microstructures in Al–8Si alloys with different mg content. Materials 14(4):762. https://doi.org/10.3390/ma1404076210.3390/ma14040762 ↗
39. Wang XJ, Hu XS, Nie KB, Deng KK, Wu K, Zheng MY (2012) Dynamic recrystallization behavior of particle reinforced Mg matrix composites fabricated by stir casting. Mater Sci Eng, A 545:38–43. https://doi.org/10.1016/j.msea.2012.02.07710.1016/j.msea.2012.02.077 ↗
40. Wang Z, Huang B, Qi L, Wang G, Dargusch MS (2017) Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process. J Alloys Compd 708:328–336. https://doi.org/10.1016/j.jallcom.2017.03.01010.1016/j.jallcom.2017.03.010 ↗
41. Chang H, Wang X, Hu X, Wang Y, Wu K (2014) Effects of reinforced particles on dynamic recrystalliza- tion of mg base alloys during hot extrusion. Rare Met Mater Eng 43(8):1821–1825. https://doi.org/10.1016/S1875-5372(14)60138-710.1016/S1875-5372(14)60138-7 ↗