Effect of laser fluence and pulse overlapping on corrosion properties, cytocompatibility and osseointegration of Ti6Al4V Alloy
Source abstract
Abstract
The surface properties of artificial implants are responsible for contact, primary fixation, intermediate bonding and future stability with the host tissue and their suitable alteration can improve functionality of the implants. Here, a picosecond pulsed laser was employed to alter the surface properties of a widely used biomaterial, Ti64. Three types of samples with variation in average surface roughness, wettability and presence of oxide layer were prepared by changing the laser fluence and pulse overlapping factor. The influence of change in surface properties on electrochemical behavior, bio-corrosion and cytocompatibility and ossiointegration of the sample were investigated. Comparative studies showed an improvement in anticorrosive behavior of Ti64 alloy after laser treatment that is confirmed from the open-circuit potential, Tafel analysis and impedance spectroscopy in simulated body fluid. Furthermore, the non-toxic nature of laser-treated surface was established and was confirmed from the cytotoxicity studies on U2OS osteosarcoma cells. Comparable number of cells with no changes in nuclear morphologies were found to be adhered on laser-treated samples. Growth of hydroxayaptite on all samples was monitored 25 days after their immersion in simulated body fluid. Along with improved osseointegration capability, the laser-treated sample at a fluence of 0.12 J/cm2 and 58% laser pulse overlapping factor exhibited superior performance in all other tested aspects. This shows that the chosen experimental parameters suitably modified the surface to enhance its biocompatibility in all tests performed in this study.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Sarraf M, Rezvani Ghomi E, Alipour S, Ramakrishna S, Liana Sukiman N (2022) A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications. Bio-Des Manuf 5:371–39510.1007/s42242-021-00170-3 ↗
2. Manivasagam G, Dhinasekaran F, Rajamanickam A (2010) Biomedical implants: corrosion and its prevention-a review. Recent Pat Corros Sci 2:40–5410.2174/1877610801002010040 ↗
3. Chen Q, Thouas GA (2015) Metallic implant biomaterials. Mater Sci Eng R Rep 87:110.1016/j.mser.2014.10.001 ↗
4. Prestat M, Thierry D (2021) Corrosion of titanium under simulated inflammation conditions: clinical context and in vitro investigations. Acta Biomater 136:7210.1016/j.actbio.2021.10.002 ↗
5. Lin N, Li D, Zou J, Xie R, Wang Z, Tang B (2018) Surface texture-based surface treatments on Ti6Al4V titanium alloys for tribological and biological applications: a mini review. Materials 11:48710.3390/ma11040487 ↗
6. Shaikh S, Kedia S, Majumdar AG, Subramanian M, Sinha S (2018) In vitro bioactivity and biocompatibility of femtosecond laser-modified Ti6Al4V alloy. Appl Phys A 124:1–1010.1007/s00339-018-2238-5 ↗
7. Torres-Avila IP II, Padilla-Martinez N Pérez-H et al (2020) Surface modification of the Ti-6Al-4V alloy by anodic oxidation and its effect on osteoarticular cell proliferation. Coatings 10:49110.3390/coatings10050491 ↗
8. Brunette DM, Tengvall P, Textor M (2001) Titanium in medicine: material science, surface science, engineering, biological responses and medical applications. Springer, Berlin, p 58710.1007/978-3-642-56486-4 ↗
9. Iwaya Y, Machigashira M, Kanbara K (2008) Surface properties and biocompatibility of acid-etched titanium. Dent Mater J 27:41510.4012/dmj.27.415 ↗
10. Chu PK, Chen J, Wang L, Huang N (2002) Plasma-surface modification of biomaterials. Mater Sci Eng R Rep 36:14310.1016/S0927-796X(02)00004-9 ↗
11. Singh A, Harimkar SP (2012) Laser surface engineering of magnesium alloys: a review. Jom 64:71610.1007/s11837-012-0340-2 ↗
12. Gujba AK, Medraj M (2014) Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening. Materials 7:792510.3390/ma7127925 ↗
13. Shaikh S, Kedia S, Singh D, Subramanian M, Sinha S (2019) Surface texturing of Ti6Al4V alloy using femtosecond laser for superior antibacterial performance. J Laser Appl 31:02201110.2351/1.5081106 ↗
14. Sadeghi M, Kharaziha M, Salimijazi H, Tabesh E (2019) Role of micro-dimple array geometry on the biological and tribological performance of Ti6Al4V for biomedical applications. Surf Coat Technol 362:28210.1016/j.surfcoat.2019.01.113 ↗
15. Florian C, Kirner SV, Krüger J, Bonse J (2020) Surface functionalization by laser-induced periodic surface structures. J Laser Appl 32:02206310.2351/7.0000103 ↗
16. Kedia S, Bonagani SK, Majumdar AG (2021) Nanosecond laser surface texturing of type 316L stainless steel for contact guidance of bone cells and superior corrosion resistance. Colloid Interface Sci Commun 42:10041910.1016/j.colcom.2021.100419 ↗
17. Damiati L, Eales MG, Nobbs AH et al (2018) Impact of surface topography and coating on osteogenesis and bacterial attachment on titanium implants. J Tissue Eng 9:204173141879069410.1177/2041731418790694 ↗
18. Pilliar R, Deporter D, Watson P, Valiquette N (1991) Dental implant design–effect on bone remodeling. J Biomed Mater Res 25:46710.1002/jbm.820250405 ↗
19. Rafiee K, Naffakh-Moosavy H, Tamjid E (2020) The effect of laser frequency on roughness, microstructure, cell viability and attachment of Ti6Al4V alloy. Mater Sci Eng C 109:11063710.1016/j.msec.2020.110637 ↗
20. Schnell G, Duenow U, Seitz H (2020) Effect of laser pulse overlap and scanning line overlap on femtosecond laser-structured Ti6Al4V surfaces. Materials 13:96910.3390/ma13040969 ↗
21. Farnia A, Ghaini FM, Sabbaghzadeh J (2013) Effects of pulse duration and overlapping factor on melting ratio in preplaced pulsed Nd: YAG laser cladding. Opt Lasers Eng 51:6910.1016/j.optlaseng.2012.07.015 ↗
22. Eliaz N (2019) Corrosion of metallic biomaterials: a review. Materials 12:40710.3390/ma12030407 ↗
23. Shah FA, Thomsen P, Palmquist A (2019) Osseointegration and current interpretations of the bone-implant interface. Acta Biomater 84:110.1016/j.actbio.2018.11.018 ↗
24. Yilmaz B, Pazarceviren AE, Tezcaner A, Evis Z (2020) Historical development of simulated body fluids used in biomedical applications: a review. Microchem J 155:10471310.1016/j.microc.2020.104713 ↗
25. Tian P, Zhao X, Sun B et al (2022) Enhanced anticorrosion and tribological properties of Ti6Al4V alloys with Fe3O4/HA coatings. Surf Coat Technol 433:12811810.1016/j.surfcoat.2022.128118 ↗
26. Rafieazad M, Jaffer JA, Cui C, Duan X, Nasiri A (2018) Nanosecond laser fabrication of hydrophobic stainless steel surfaces: the impact on microstructure and corrosion resistance. Materials 11:157710.3390/ma11091577 ↗
27. Mirhosseini N, Crouse P, Schmidth M, Li L, Garrod D (2007) Laser surface micro-texturing of Ti–6Al–4V substrates for improved cell integration. Appl Surf Sci 253:773810.1016/j.apsusc.2007.02.168 ↗
28. Zhao W, Zhao G, He N, Li L, Iqbal A (2020) Study on laser-induced oxidation of Ti6Al4V alloy under two different reactive atmospheres. J Micro-Nano-Manuf 8:01090410.1115/1.4046037 ↗
29. Domkea M, Pireddaa G, Stroja S (2015), Calculating the optimal combination of pulse-to-pulse distance and fluence for scribing and surface ablation with ultrashort pulsed lasers. In: Lasers in manufacturing (LiM 2015) proceedings, internationales congress Center München, Germany, p 22
30. Aksakal B, Yildirim O, Gul H (2004) Metallurgical failure analysis of various implant materials used in orthopedic applications. J Fail Anal Prev 4:1710.1007/s11668-996-0007-9 ↗
31. Sivakumar M, Kamachi Mudali U, Rajeswari S (1994) Investigation of fatigue failure of a stainless steel orthopedic implant device. J Mater Eng Perform 3:11110.1007/BF02654506 ↗
32. Boinovich LB, Emelyanenko AM, Modestov AD, Domantovsky AG, Emelyanenko KA (2015) Synergistic effect of superhydrophobicity and oxidized layers on corrosion resistance of aluminum alloy surface textured by nanosecond laser treatment. ACS Appl Mater Interfaces 7:1950010.1021/acsami.5b06217 ↗
33. Zhao X, Ren X, Wang C et al (2020) Enhancement of hydroxyapatite formation on titanium surface by alkali heat treatment combined with induction heating and acid etching. Surf Coat Technol 399:12617310.1016/j.surfcoat.2020.126173 ↗
34. Wu JM, Hayakawa S, Tsuru K, Osaka A (2004) Low-temperature preparation of anatase and rutile layers on titanium substrates and their ability to induce in vitro apatite deposition. J Am Ceram Soc 87:163510.1111/j.1551-2916.2004.01635.x ↗