Oxidation properties of complex concentrated alloys FeAlCrV and FeAlCrMo
Source abstract
Abstract
Abstract Complex concentrated alloys (CCAs) are attracting considerable interest due to their potential applications under extreme conditions. This study focuses on two complex concentrated alloys, the FeAlCrV and the FeAlCrMo alloys, which already exhibited exceptional mechanical properties at high temperatures. In this regard, room temperature corrosion resistance and high-temperature oxidation were studied to investigate their potential applicability in harsh environments. It is shown that the corrosion resistance of both CCAs is much higher than that of AISI 304 and P91 steels in 0.5 M H2SO4 solution, while in 3.5% NaCl solution was comparable. On the contrary, high-temperature oxidation of CCAs was unsatisfactory, especially exceeding 700 °C. The intensive analysis of the formed oxide scales revealed that the protective oxide layer is not being formed at temperatures above 700 °C, primarily because of the occurrence of vanadium corrosion (FeAlCrV) and evaporation of Mo oxides (FeAlCrMo). The results of this study unambiguously showed the importance of studying oxidation properties at high temperatures parallel with the mechanical properties for the development of CCAs for cutting-edge technical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Khanna AS (2002) Introduction to high temperature oxidation and corrosion. ASM International, Materials Park, OH
2. Miracle DB, Senkov ON (2017) A critical review of high entropy alloys and related concepts. Acta Mater 122:448–511. https://doi.org/10.1016/j.actamat.2016.08.08110.1016/j.actamat.2016.08.081 ↗
3. Senkov ON, Miracle DB, Chaput KJ, Couzinie J-P (2018) Development and exploration of refractory high entropy alloys—a review. J Mater Res 33:3092–3128. https://doi.org/10.1557/jmr.2018.15310.1557/jmr.2018.153 ↗
4. Chen J, Zhou X, Wang W et al (2018) A review on fundamental of high entropy alloys with promising high–temperature properties. J Alloys Compd 760:15–30. https://doi.org/10.1016/j.jallcom.2018.05.06710.1016/j.jallcom.2018.05.067 ↗
5. Kao Y-F, Lee T-D, Chen S-K, Chang Y-S (2010) Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids. Corros Sci 52:1026–1034. https://doi.org/10.1016/j.corsci.2009.11.02810.1016/j.corsci.2009.11.028 ↗
6. Zhang C, Chen GJ, Dai PQ (2016) Evolution of the microstructure and properties of laser-clad FeCrNiCoB x high-entropy alloy coatings. Mater Sci Technol 32:1666–1672. https://doi.org/10.1080/02670836.2015.113803510.1080/02670836.2015.1138035 ↗
7. Li J, Yang X, Zhu R, Zhang Y (2014) Corrosion and serration behaviors of TiZr0.5NbCr0.5VxMoy high entropy alloys in aqueous environments. Metals 4:597–608. https://doi.org/10.3390/met404059710.3390/met4040597 ↗
8. Slone CE, Miao J, George EP, Mills MJ (2019) Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures. Acta Mater 165:496–507. https://doi.org/10.1016/j.actamat.2018.12.01510.1016/j.actamat.2018.12.015 ↗
9. Gludovatz B, George EP, Ritchie RO (2015) Processing, microstructure and mechanical properties of the CrMnFeCoNi high-entropy alloy. JOM 67:2262–2270. https://doi.org/10.1007/s11837-015-1589-z10.1007/s11837-015-1589-z ↗
10. Otto F, Dlouhý A, Somsen Ch et al (2013) The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Mater 61:5743–5755. https://doi.org/10.1016/j.actamat.2013.06.01810.1016/j.actamat.2013.06.018 ↗
11. Gali A, George EP (2013) Tensile properties of high- and medium-entropy alloys. Intermetallics 39:74–78. https://doi.org/10.1016/j.intermet.2013.03.01810.1016/j.intermet.2013.03.018 ↗
12. Stephan-Scherb C, Schulz W, Schneider M et al (2021) High-temperature oxidation in dry and humid atmospheres of the equiatomic CrMnFeCoNi and CrCoNi high- and medium-entropy alloys. Oxid Met 95:105–133. https://doi.org/10.1007/s11085-020-10014-710.1007/s11085-020-10014-7 ↗
13. Pešička J, Král R, Daniš S et al (2018) Structure and mechanical properties of FeAlCrV and FeAlCrMo medium-entropy alloys. Mater Sci Eng A 727:184–191. https://doi.org/10.1016/j.msea.2018.04.06210.1016/j.msea.2018.04.062 ↗
14. Sequeira CAC de (2019) High temperature corrosion: fundamentals and engineering, 1st edn. Wiley, Hoboken, NJ10.1002/9781119474371 ↗
15. Gulbransen EA, Andrew KF, Brassart FA (1963) Oxidation of molybdenum 550° to 1700 °C. J Electrochem Soc 110:952. https://doi.org/10.1149/1.242591810.1149/1.2425918 ↗
16. Keller JG, Douglass DL (1991) The high-temperature oxidation behavior of vanadium-aluminum alloys. Oxid Met 36:439–464. https://doi.org/10.1007/BF0115159110.1007/BF01151591 ↗
17. Pradhan D, Mahobia GS, Chattopadhyay K, Singh V (2018) Severe hot corrosion of the superalloy IN718 in mixed salts of Na2SO4 and V2O5 at 700 °C. J Mater Eng Perform 27:4235–4243. https://doi.org/10.1007/s11665-018-3501-910.1007/s11665-018-3501-9 ↗
18. McCafferty E (2010) Introduction to corrosion science. Springer, New York, NY10.1007/978-1-4419-0455-3 ↗
19. Lu P, Saal JE, Olson GB et al (2019) Computational design and initial corrosion assessment of a series of non-equimolar high entropy alloys. Scr Mater 172:12–16. https://doi.org/10.1016/j.scriptamat.2019.07.00310.1016/j.scriptamat.2019.07.003 ↗
20. Xiao DH, Zhou PF, Wu WQ et al (2017) Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr, Ti) high entropy alloys. Mater Des 116:438–447. https://doi.org/10.1016/j.matdes.2016.12.03610.1016/j.matdes.2016.12.036 ↗
21. Lee CP, Chang CC, Chen YY et al (2008) Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments. Corros Sci 50:2053–2060. https://doi.org/10.1016/j.corsci.2008.04.01110.1016/j.corsci.2008.04.011 ↗
22. Chou YL, Yeh JW, Shih HC (2010) The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments. Corros Sci 52:2571–2581. https://doi.org/10.1016/j.corsci.2010.04.00410.1016/j.corsci.2010.04.004 ↗
23. Esmaily M, Qiu Y, Bigdeli S et al (2020) High-temperature oxidation behaviour of AlxFeCrCoNi and AlTiVCr compositionally complex alloys. Npj Mater Degrad 4:25. https://doi.org/10.1038/s41529-020-00129-210.1038/s41529-020-00129-2 ↗
24. Schellert S, Gorr B, Laube S et al (2021) Oxidation mechanism of refractory high entropy alloys Ta-Mo-Cr-Ti-Al with varying Ta content. Corros Sci 192:109861. https://doi.org/10.1016/j.corsci.2021.10986110.1016/j.corsci.2021.109861 ↗
25. Gorr B, Azim M, Christ H-J et al (2015) Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys. J Alloys Compd 624:270–278. https://doi.org/10.1016/j.jallcom.2014.11.01210.1016/j.jallcom.2014.11.012 ↗
26. Engkvist J, Bexell U, Grehk M, Olsson M (2009) High temperature oxidation of FeCrAl-alloys—influence of Al-concentration on oxide layer characteristics: high temperature oxidation of FeCrAl-<!–alloys. Mater Corros 60:876–881. https://doi.org/10.1002/maco.20080518610.1002/maco.200805186 ↗
27. Ham G-S, Kim Y-K, Na YS, Lee K-A (2021) Effect of Ti addition on the microstructure and high-temperature oxidation property of AlCoCrFeNi high-entropy alloy. Met Mater Int 27:156–165. https://doi.org/10.1007/s12540-020-00708-710.1007/s12540-020-00708-7 ↗
28. Shaburova NA, Moghaddam AO, Veselkov SN et al (2021) High-temperature oxidation behavior of AlxCoCrFeNiM (M = Cu, Ti, V) high-entropy alloys. Phys Mesomech 24:653–662. https://doi.org/10.1134/S102995992106003510.1134/S1029959921060035 ↗
29. Bürckner M, Mengis L, White EMH, Galetz MC (2023) Influence of copper and aluminum substitution on high-temperature oxidation of the FeCoCrNiMn “Cantor” alloy. Mater Corros 74:79–90. https://doi.org/10.1002/maco.20221338210.1002/maco.202213382 ↗
30. Ishii K, Kohno M, Ishikawa S, Satoh S (1997) Effect of rare-earth elements on high-temperature oxidation resistance of Fe–20Cr–5Al alloy foils. Mater Trans JIM 38:787–792. https://doi.org/10.2320/matertrans1989.38.78710.2320/matertrans1989.38.787 ↗
31. Liu CM, Wang HM, Zhang SQ et al (2014) Microstructure and oxidation behavior of new refractory high entropy alloys. J Alloys Compd 583:162–169. https://doi.org/10.1016/j.jallcom.2013.08.10210.1016/j.jallcom.2013.08.102 ↗
32. Gorr B, Mueller F, Christ H-J et al (2016) High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb 20Mo 20Cr 20Ti 20Al with and without Si addition. J Alloys Compd 688:468–477. https://doi.org/10.1016/j.jallcom.2016.07.21910.1016/j.jallcom.2016.07.219 ↗