Identifying the influence of the ultrasonic-arc technique on the He+ irradiation damage resistance of CLAM steel TIG welds
Source abstract
Abstract
To explore the influence of the ultrasonic-arc technique on irradiation damage and irradiation hardening of China Low Activation Martensitic (CLAM) steel welds, Tungsten Inert Gas (TIG) welding and ultrasonic-arc TIG welding samples were exposed to He+ radiation at room temperature. Characterization included atomic force microscopy, scanning electron microscopy, grading incident X-ray diffraction, transmission electron microscopy, tensile testing and nano-indentation. After ion irradiation, various micro-defects were produced in the two weld metals. Compared with TIG weld metal, the number of defects in UA-TIG weld metal is reduced. The average diameter of helium bubbles in the UA-TIG weld metal decreased from 2.25 to 1.96 nm, the diameter of dislocation loops decreased from 8–25 nm to 5–21 nm, and the maximum load of nanoindentation decreased from 134.34 to 103.37 mN. The results show that the ultrasonic-arc TIG process is an effective method to refine the weld grain structure and improve irradiation damage and hardening resistance of CLAM steel welds.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Fusion materials and technologies · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Yin S, Yang L, Liu Y, Yang R, Wang Y, Zhao F (2022) Stabilities of the precipitates in CLAM steel during 30,000 h thermal aging. J Nucl Mater 567:153805. https://doi.org/10.1016/j.jnucmat.2022.15380510.1016/j.jnucmat.2022.153805 ↗
2. Huang Q (2014) Development status of CLAM steel for fusion application. J Nucl Mater 455:649. https://doi.org/10.1016/j.jnucmat.2014.08.05510.1016/j.jnucmat.2014.08.055 ↗
3. Chen X, Huang Y, Madigan B, Zhou J (2012) An overview of the welding technologies of CLAM steels for fusion application. Fusion Eng Des 87:1639. https://doi.org/10.1016/j.fusengdes.2012.06.00910.1016/j.fusengdes.2012.06.009 ↗
4. Alamo A, Bertin JL, Shamardin VK, Wident P (2007) Mechanical properties of 9Cr martensitic steels and ODS-FeCr alloys after neutron irradiation at 325 °C up to 42 dpa. J Nucl Mater 367–370:54. https://doi.org/10.1016/j.jnucmat.2007.03.16610.1016/j.jnucmat.2007.03.166 ↗
5. Nishiyama Y, Onizawa K, Suzuki M et al (2008) Effects of neutron-irradiation-induced intergranular phosphorus segregation and hardening on embrittlement in reactor pressure vessel steels. Acta Mater 56:4510. https://doi.org/10.1016/j.actamat.2008.05.02610.1016/j.actamat.2008.05.026 ↗
6. Konobeev YV, Dvoriashin AM, Porollo SI, Garner FA (2006) Swelling and microstructure of pure Fe and Fe–Cr alloys after neutron irradiation to similar to 26 dpa at 400 degrees C. J Nucl Mater 355:124. https://doi.org/10.1016/j.jnucmat.2006.04.01110.1016/j.jnucmat.2006.04.011 ↗
7. Pang L, Tai P, Chang H et al (2022) Defects evolution induced by Fe and He ions irradiation in Ti3AlC2. J Nucl Mater 558:153357. https://doi.org/10.1016/j.jnucmat.2021.15335710.1016/j.jnucmat.2021.153357 ↗
8. Xin Y, Ju X, Qiu J et al (2013) Vacancy-type defect production in CLAM steel after the co-implantation of He and H ion beams studied by positron-annihilation spectroscopy. J Nucl Mater 432:120. https://doi.org/10.1016/j.jnucmat.2012.08.04310.1016/j.jnucmat.2012.08.043 ↗
9. Xie Z, Guo L, Chen Y et al (2022) Effect of helium and its synergism with displacement damage on microstructure of CLAM steel investigated by single, sequential and simultaneous Fe and He ion irradiations. J Nucl Mater 568:153872. https://doi.org/10.1016/j.jnucmat.2022.15387210.1016/j.jnucmat.2022.153872 ↗
10. Gao J, Song P, Huang Y-J et al (2019) Effects of neutron irradiation on 12Cr–6Al-ODS steel with electron-beam weld line. J Nucl Mater 524:1. https://doi.org/10.1016/j.jnucmat.2019.06.02810.1016/j.jnucmat.2019.06.028 ↗
11. Huang ZW, Yong PL, Zhou H, Li YS (2020) Grain size effect on deformation mechanisms and mechanical properties of titanium. Mater Sci Eng A 773:13872. https://doi.org/10.1016/j.msea.2019.13872110.1016/j.msea.2019.138721 ↗
12. Li X, Wang Y, Zhang Y et al (2022) Towards the dependence of radiation damage on the grain boundary character and grain size in tungsten: a combined study of molecular statics and rate theory. J Nucl Mater 563:15363. https://doi.org/10.1016/j.jnucmat.2022.15363710.1016/j.jnucmat.2022.153637 ↗
13. Wang Y, Yu C, Lu H, Chen J (2020) Research status and future perspectives on ultrasonic arc welding technique. J Manuf Process 58:936. https://doi.org/10.1016/j.jmapro.2020.09.00510.1016/j.jmapro.2020.09.005 ↗
14. Chen J, Wen Z, Jia C, Zhao B, Wu C (2022) The mechanisms of underwater wet flux-cored arc welding assisted by ultrasonic frequency pulse high-current. J Mater Process Technol 304:117567. https://doi.org/10.1016/j.jmatprotec.2022.11756710.1016/j.jmatprotec.2022.117567 ↗
15. Ziegler J, Biersack J, Littmark U (1985) The stopping range of ions in matter. Pergamon Press 1:93. https://doi.org/10.1007/978-1-4615-8103-1_310.1007/978-1-4615-8103-1_3 ↗
16. Egeland GW, Valdez JA, Maloy SA, McClellan KJ, Sickafus KE, Bond GM (2013) Heavy-ion irradiation defect accumulation in ZrN characterized by TEM, GIXRD, nanoindentation, and helium desorption. J Nucl Mater 435:77. https://doi.org/10.1016/j.jnucmat.2012.12.02510.1016/j.jnucmat.2012.12.025 ↗
17. Kelemen M, Schwarz-Selinger T, Mutzke A et al (2021) Influence of surface roughness on the sputter yield of Mo under keV D ion irradiation. J Nucl Mater 555:153135. https://doi.org/10.1016/j.jnucmat.2021.15313510.1016/j.jnucmat.2021.153135 ↗
18. Ryuto H, Ichihashi G, Takeuchi M, Takaoka GH (2013) Irradiation effects of water cluster ion beam on PMMA surface. Vacuum 87:119. https://doi.org/10.1016/j.vacuum.2012.02.05110.1016/j.vacuum.2012.02.051 ↗
19. Huang XC, Feng Y, Dou YK et al (2016) Effect of electron irradiation on Ti3AlC2. Scr Mater 113:114. https://doi.org/10.1016/j.scriptamat.2015.10.03110.1016/j.scriptamat.2015.10.031 ↗
20. Li YL, Hu SY, Sun X, Gao F, Henager CH, Khaleel M (2010) Phase-field modeling of void migration and growth kinetics in materials under irradiation and temperature field. J Nucl Mater 407:119. https://doi.org/10.1016/j.jnucmat.2010.09.04810.1016/j.jnucmat.2010.09.048 ↗
21. Meric G, de Bellefon IM, Robertson TRA, van Duysen JC, Sridharan K (2019) Radiation-resistant nanotwinned austenitic stainless steel. Scr Mater 159:123. https://doi.org/10.1016/j.scriptamat.2018.09.03010.1016/j.scriptamat.2018.09.030 ↗
22. Lemine OM (2009) Microstructural characterisation of α-Fe2O3 nanoparticles using, XRD line profiles analysis, FE-SEM and FT-IR. Superlatt Microstruct 45:576. https://doi.org/10.1016/j.spmi.2009.02.00410.1016/j.spmi.2009.02.004 ↗
23. Bonny G, Konstantinovic MJ, Bakaeva A et al (2020) Trends in vacancy distribution and hardness of high temperature neutron irradiated single crystal tungsten. Acta Mater 198:1. https://doi.org/10.1016/j.actamat.2020.07.04710.1016/j.actamat.2020.07.047 ↗
24. Cottrell GA, Dudarev SL, Forrest RA (2004) Immobilization of interstitial loops by substitutional alloy and transmutation atoms in irradiated metals. J Nucl Mater 325:195. https://doi.org/10.1016/j.jnucmat.2003.12.00110.1016/j.jnucmat.2003.12.001 ↗
25. Liu ZY, He B, Qu X, Niu LB, Li RS, Wang F (2019) Energetics and diffusion of point defects in Au/Ag metals: a molecular dynamics study. Chin Phys B 28:114. https://doi.org/10.1088/1674-1056/28/8/08340110.1088/1674-1056/28/8/083401 ↗
26. Tschopp MA, Horstemeyer MF, Gao F, Sun X, Khaleel M (2011) Energetic driving force for preferential binding of self-interstitial atoms to Fe grain boundaries over vacancies. Scr Mater 64:908. https://doi.org/10.1016/j.scriptamat.2011.01.03110.1016/j.scriptamat.2011.01.031 ↗
27. Bai J, Li J, Fu C et al (2021) Effect of helium bubbles on the irradiation hardening of GH3535 welded joints at 650 °C. J Nucl Mater 557:153241. https://doi.org/10.1016/j.jnucmat.2021.15324110.1016/j.jnucmat.2021.153241 ↗
28. Tan L, Busby JT (2013) Alloying effect of Ni and Cr on irradiated microstructural evolution of type 304 stainless steels. J Nucl Mater 443:351. https://doi.org/10.1016/j.jnucmat.2013.07.05410.1016/j.jnucmat.2013.07.054 ↗
29. Lam NQ, Okamoto PR, Li M (1997) Disorder-induced amorphization. J Nucl Mater 251:89. https://doi.org/10.1016/S0022-3115(97)00257-210.1016/S0022-3115(97)00257-2 ↗
30. Mattucci MA, Cherubin I, Changizian P, Skippon T, Daymond MR (2021) Indentation size effect, geometrically necessary dislocations and pile-up effects in hardness testing of irradiated nickel. Acta Mater 207:116702. https://doi.org/10.1016/j.actamat.2021.11670210.1016/j.actamat.2021.116702 ↗
31. Jin SX, Guo LP, Luo FF, Yao ZW, Ma SL, Tang R (2013) Ion irradiation-induced precipitation of Cr23C6 at dislocation loops in austenitic steel. Scr Mater 68:138. https://doi.org/10.1016/j.scriptamat.2012.10.00210.1016/j.scriptamat.2012.10.002 ↗
32. Badji R, Chauveau T, Bacroix B (2013) Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint. Mater Sci Eng A 575:94. https://doi.org/10.1016/j.msea.2013.03.01810.1016/j.msea.2013.03.018 ↗
33. Li C, Shu G, Liu W, Duan Y (2019) Effects of neutron irradiation on elastic modulus of RPV steel. Ann Nucl Energy 134:20. https://doi.org/10.1016/j.anucene.2019.05.05610.1016/j.anucene.2019.05.056 ↗
34. Zhang X, Mei X, Cao X, Wang Y, Sun J, Zheng P (2018) The effect of He ions irradiation on the micro-structure and property of CLF-1 steel. J Nucl Mater 509:496. https://doi.org/10.1016/j.jnucmat.2018.07.03810.1016/j.jnucmat.2018.07.038 ↗
35. Linga Murty K (1999) Role and significance of source hardening in radiation embrittlement of iron and ferritic steels. J Nucl Mater 270:115. https://doi.org/10.1016/S0022-3115(98)00766-110.1016/S0022-3115(98)00766-1 ↗
36. Tanigawa H, Klueh RL, Hashimoto N, Sokolov MA (2009) Hardening mechanisms of reduced activation ferritic/martensitic steels irradiated at 300 °C. J Nucl Mater 386–388:231. https://doi.org/10.1016/j.jnucmat.2008.12.09410.1016/j.jnucmat.2008.12.094 ↗
37. Yu JN (2007) Material irradiation effect. Chemical Industry Press, Beijing
38. Xu S, Xiong L, Chen Y, McDowell DL (2016) An analysis of key characteristics of the Frank–Read source process in FCC metals. J Mech Phys Solids 96:460. https://doi.org/10.1016/j.jmps.2016.08.00210.1016/j.jmps.2016.08.002 ↗
39. Jiang S, Yu C, Zheng P, Guo L, Zhou X, Rao W-F (2021) Bubbles and precipitates formation and effects on the hardening of irradiated vanadium alloys. J Nucl Mater 544:152712. https://doi.org/10.1016/j.jnucmat.2020.15271210.1016/j.jnucmat.2020.152712 ↗
40. Guo LP, Luo FF, Yu YX (2017) Dislocation loops in irradiation nuclear materials. National Defense Industry Press, Beijing
41. BRT Frost (1977) Fundamental aspects of nuclear reactor fuel elements: Donald R. Olander Department of Nuclear Engineering, University of California, Berkeley, California 94720, USA. J Nucl Mater 68:124. https://doi.org/10.1016/0022-3115(77)90226-410.1016/0022-3115(77)90226-4 ↗
42. Tanimoto H, Mizubayashi H, Teramae N, Okuda S (1994) Migration mechanism of self-interstitial atoms in Mo after low temperature irradiation II. Dislocation pinning J Alloys Compd 211–212:136. https://doi.org/10.1016/0925-8388(94)90466-910.1016/0925-8388(94)90466-9 ↗