journal article·2023-03

Inhibiting effect of tensile strain on the nucleation of M6C at grain boundary

X. D. Song, Y. L. Huo, X. Q. Song, H. L. Xu, Y. X. Wang

Journal of Materials Science· Volume 58· Issue 10
Publisher page

Abstract

Electron microscope was utilized to detect the nucleation of grain boundary carbides in Haynes 282 Ni-based superalloy during creep. Besides, first-principles calculations were conducted to comprehensively explore the site preference of alloying elements during the nucleation as well as the effect of tensile strain on the site preference behaviors. Experiment indicates that Mo atoms will segregate to the M23C6/Ni interface, which promotes the nucleation of grain boundary M6C at the interface, during creep. Therefore, the site preference of Mo at the M23C6/Ni interface was calculated. The results show that the segregated Mo atoms prefer to occupy the Cr sites rather than the Ni sites. Mo will occupy the two layers of Cr sites near the interface in an alternating way. Tensile strain as well as its directions can seriously influence the site preference of Mo at the interface, while the strains with directions of [001], [101] and [111] only affect the occupation sequence of Mo, the strains with directions of [110] and [100] will inhibit the segregation of Mo by increasing segregation energy. Therefore, in general, tensile strain inhibits the segregation of Mo to the M23C6/Ni interface and thus the nucleation of M6C at the interface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Zhong ZH, Gu YF, Yuan Y, Shi Z (2013) A new wrought Ni–Fe-base superalloy for advanced ultra-supercritical power plant applications beyond 700C. Mater Lett 109:38–4110.1016/j.matlet.2013.07.060 ↗
2. Patel SJ, Debarbadillo JJ, Baker BA, Gollihue RD (2013) Nikel base superalloys for next generation coal fired A-USC power plants. Procedia Eng 55:246–25210.1016/j.proeng.2013.03.250 ↗
3. Tanaka M, Kato R (2010) The effect of heat treatments on the creep-rupture properties of a wrought Ni–Cr heat-resistent alloy at 973 K. J Mater Sci 45:4029–403510.1007/s10853-010-4481-9 ↗
4. Cabibbo M, Gariboldi E, Spigarelli S, Ripamonti D (2008) Creep behavior of INCOLOY alloy 617. J Mater Sci 43:2912–292110.1007/s10853-007-1803-7 ↗
5. Fedoseeva A, Nikitin I, Dudova N, Kaibyshev R (2020) Nucleation of W-rich carbides and Laves phase in a Re-containing 10% Cr steel during creep at 650 °C. Mater Charact 169:11065110.1016/j.matchar.2020.110651 ↗
6. Song XQ, Wang YX, Gong JJ, Li Y, Chen Z (2022) Studies on the abnormal effect of tensile strain on the MC→M23C6 in-situ transformation in Ni-based superalloy. J Alloy Compd 923:16630710.1016/j.jallcom.2022.166307 ↗
7. Wang J, Zhou LZ, Qin XZ, Sheng LY, Hou JS, Guo JT (2012) Primary MC decomposition and its effects on the rupture behaviors in hot-corrosion resistant Nibased superalloy K444. Mater Sci Eng A 553:14–2110.1016/j.msea.2012.05.077 ↗
8. Mukuerjee S, Sivaprasad S, Tarafder S, Bhattacharyya D, Kar SK (2022) Influence of ageing on high temperature tensile deformation of a Ni-based superalloy, Haynes 282. J Alloy Compd 917:65430
9. Mukuerjee S, Barat K, Sivaprasad S, Tarafder S, Kar SK (2019) Elevated temperature low cycle fatigue behaviour of Haynes 282 and its correlation with microstructure-Effect of ageing conditions. Mater Sci Eng A 762:13807310.1016/j.msea.2019.138073 ↗
10. Joseph C, Persson C, Collinader MH (2017) Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy Haynes 282. Mater Sci Eng A 679:520–53010.1016/j.msea.2016.10.048 ↗
11. Liu J, Li JH, Hage FS, Ghosh P, Li J, Wang W et al (2017) Correlative characterization on microstructure evolution of Ni-based K403 alloy during thermal exposure. Acta Mater 131:169–18610.1016/j.actamat.2017.04.006 ↗
12. Gui WM, Zhang HY, Yang M, Jin T, Sun XF, Zheng Q (2017) The investigation of carbides evolution in a cobalt-base superalloy at elevated temperature. J Alloy Compd 695:1271–127810.1016/j.jallcom.2016.10.256 ↗
13. Zhu ZY, Chen L (2019) Effect of annealing on microstructure and mechanical properties of biomedical hot-rolled Co–Cr–W–Ni alloy. Mater Res Express 6:12651110.1088/2053-1591/ab546c ↗
14. Liu DX, Zhang X, Qin XQ, Ding YT (2017) High-temperature mechanical properties of Inconel-625: role of carbides and delta phase. Mater Sci Technol 33:1610–161710.1080/02670836.2017.1300365 ↗
15. Buerstmayr B, Theska F, Webster R, Pick ML, Primig S (2021) Correlative analysis of grain boundary precipitates in Ni-based superalloy Rene 41. Mater Charact 178:11125010.1016/j.matchar.2021.111250 ↗
16. Xu HL, Liu W, Lu FG, Wang P, Ding YM (2017) Evolution of carbides and its characterization in HAZ during NG-TIG welding of alloy 617B. Mater Charact 130:270–27710.1016/j.matchar.2017.06.021 ↗
17. Li Y, Wang X (2020) Microstructure evolution of a simulated coarse-grained heat-affected zone of T23 steel during aging. Metall Mater Trans A 51A:1183–119410.1007/s11661-019-05572-8 ↗
18. Huang M, Yang XY, Liu WW, Li JR, Yang S, Qin Y (2018) Precipitation characteristics of a nickel-based single-crystal superalloy after long-term thermal exposure. Int J Mater Res 109:811–81810.3139/146.111671 ↗
19. Naghavi SS, Hegde VI, Wolverton C (2017) Diffusion coefficients of transition metals in fcc cobalt. Acta Mater 132:467–47810.1016/j.actamat.2017.04.060 ↗
20. Xiang SS, Mao SC, Shen ZJ, Long HB, Wei H, Ma SY et al (2017) Site preference of metallic elements in M23C6 carbide in a Ni-based single crystal superalloy. Mater Des 129:9–1410.1016/j.matdes.2017.05.023 ↗
21. Xie JY, Shen J, Chen NX, Seetharaman S (2006) Site preference and mechanical properties of Cr23−xTxC6 and Fe21T2C6 (T=Mo, W). Acta Mater 54:4653–465810.1016/j.actamat.2006.03.059 ↗
22. Xie JY, Chen NX, Teng LD, Seetharaman S (2005) Atomistic study on the site preference and thermodynamic properties for Cr23−xFexC6. Acta Mater 53:5305–531210.1016/j.actamat.2005.07.039 ↗
23. Ramakrishnan A, Dinda GP (2019) Microstructure and mechanical properties of direct laser metal deposited Haynes 282 superalloy. Mater Sci Eng A 748:347–35610.1016/j.msea.2019.01.101 ↗
24. Lu HJ, Wu H, Zou N, Lu XG, He YL, Morgan D (2018) First-principles investigation on diffusion mechanism of alloying elements in dilute Zr alloys. Acta Mater 154:161–17110.1016/j.actamat.2018.05.015 ↗
25. Lu S, Hu Q, Yang R, Johansson BO, Vitos L (2010) First-principles determination of the α–α’ interfacial energy in Fe–Cr alloys. Phys Rev B 82:195103–19510910.1103/PhysRevB.82.195103 ↗
26. Jin N, Yang YQ, Luo X, Li J, Huang B, Liu S, Xiao ZY (2014) Theoretical calculations on the adhesion, stability, electronic structure and bonding of SiC/W interface. Appl Surf Sci 314:896–90510.1016/j.apsusc.2014.06.179 ↗
27. Liu P, Han XL, Sun DL, Wang Q (2018) First-principles investigation on the structures, energies, electronic and defective properties of Ti2AlN surfaces. Appl Surf Sci 433:1056–106610.1016/j.apsusc.2017.10.112 ↗
28. Chen HN, Lu JB, Kong Y, Li K, Yang T, Meingast A et al (2020) Atomic scale investigation of the crystal structure and interfaces of the B’ precipitate in Al–Mg–Si alloys. Acta Mater 185:193–20310.1016/j.actamat.2019.11.059 ↗
29. Zhevnenko SN, Petrov IS, Scheiber D, Razumovskiy VI (2021) Surface and segregation energies of Ag based alloys with Ni, Co and Fe: direct experimental measurement and DFT study. Acta Mater 205:11656510.1016/j.actamat.2020.116565 ↗
30. Song XQ, Wang YX, Zhao XX, Zhang J, Li Y, Wang YF et al (2022) Analysis of carbide transformation in MC–M23C6 and its effect on mechanical properties of Ni-based superalloy. J Alloy Comp 911:16495910.1016/j.jallcom.2022.164959 ↗