Mechanism investigation on the enhancement of creep resistance in a hot-extruded Mg–Mn alloy rod by dilute Ce addition
Source abstract
Abstract
This work investigated the tensile creep behaviors of hot-extruded Mg–0.9Mn (0Ce) alloy and Mg–0.9Mn–0.5Ce (wt%) (0.5Ce) alloy. Tensile creep tests were conducted at 423 K under the applied stresses of 20 MPa, 30 MPa and 40 MPa along the extrusion direction (ED) and transverse direction (TD). Regardless of alloy composition, it was shown that creep behavior exhibited obvious dependence on the loading direction. The intensive basal slip and $$left{ {10overline{1} 2} ight}$$ twinning caused the poorer creep resistance along the TD than that along the ED. More importantly, experimental results showed that 0.5Ce alloy had more excellent creep resistance than that of 0Ce alloy when crept along the same direction, and the corresponding mechanism on the enhancement of creep resistance by dilute Ce addition was uncovered. When crept along the ED, the dynamically co-precipitated α-Mn and Mg12Ce phases effectively increased the creep resistance by impeding the dislocation movements even basal slip was catalyzed in 0.5Ce alloy. When crept along the TD, addition of Ce enriched the creep mechanism and impaired the adverse effects of basal slip to creep. Besides, the dynamically co-precipitated α-Mn and Mg12Ce phases also improved the creep resistance of 0.5Ce alloy. Unexpectedly, it was discovered that Ce atoms tended to segregate toward grain boundaries during creep, which strongly contributed to the excellent creep resistance of 0.5Ce alloy by decreasing the mobility of grain boundaries. The finding of Ce segregation at the grain boundaries provides important thought for designing high heat-resistant Mg–Mn–Ce-based alloys by grain boundary engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Wu ZX, Curtin WA (2015) The origins of high hardening and low ductility in magnesium. Nature 526:62–6710.1038/nature15364 ↗
2. Pollock TM (2010) Weight loss with magnesium alloys. Science 328:986–98710.1126/science.1182848 ↗
3. Zhang YX, Huo QH, Zhang ZR, Xiao ZY, Wang CY, Hashimoto A, Yang XY (2021) Effects of yttrium content on the three-dimensional compressive creep anisotropy of Mg-Y alloys. Metall Mater Trans A 52:3910–393010.1007/s11661-021-06352-z ↗
4. Somekawa H, Basha DA, Singh A (2019) Deformation behavior at room temperature ranges of fine-grained Mg-Mn system alloys. Mater Sci Eng A 766:13838410.1016/j.msea.2019.138384 ↗
5. Gu DD, Wang JW, Chen YB, Peng J (2020) Effect of Mn addition and refining process on Fe reduction of Mg-Mn alloys made from magnesium scrap. T Nonferr Metal Soc 30:2941–295110.1016/S1003-6326(20)65433-4 ↗
6. Zhao DQ, Li GY, Li PL, Zhou JX, Cheng KM, Liu YT, Yang YS, Duan JP, Ghomashchi R, Wang XT (2021) A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg. Mater Sci Eng A 803:14050810.1016/j.msea.2020.140508 ↗
7. Chen DL, Zhang YX, Zhang ZR, Nagaumi H, Liu HS, Yang XY (2022) Study on the three-dimensional tensile creep anisotropy of a hot-rolled Mg-0.9Mn-1.5Ce alloy sheet. J Alloy Comp 901:16365510.1016/j.jallcom.2022.163655 ↗
8. Celikin M, Kaya AA, Pekguleryuz M (2012) Effect of manganese on the creep behavior of magnesium and the role of α-Mn precipitation during creep. Mater Sci Eng A 534:129–14110.1016/j.msea.2011.11.050 ↗
9. Sabat RK, Brahme AP, Mishra RK, Inal K, Suwas S (2018) Ductility enhancement in Mg-0.2%Ce alloys. Acta Mater 161:246–25710.1016/j.actamat.2018.09.023 ↗
10. Hadorn JP, Mulay RP, Hantzsche K, Yi SB, Bohlen J, Letzig D, Agnew SR (2013) Texture weakening effects in Ce-containing Mg alloys. Metall Mater Trans A 44:1566–157610.1007/s11661-012-1486-9 ↗
11. Mishra RK, Brahme A, Sabat RK, Jin L, Inal K (2019) Twinning and texture randomization in Mg and Mg-Ce alloys. Int J Plast 117:157–17210.1016/j.ijplas.2019.03.001 ↗
12. Masoumi M, Hoseini M, Pekguleryuz M (2011) The influence of Ce on the microstructure and rolling texture of Mg-1%Mn alloy. Mater Sci Eng A 528:3122–312910.1016/j.msea.2010.12.096 ↗
13. Ma N, Li H, Pan JL, Fang DQ, Tian YJ, Peng QM (2013) Effects of cerium on microstructures, recovery behavior and mechanical properties of backward extruded Mg-0.5Mn alloys. Mater Sci Eng A 564:310–31610.1016/j.msea.2012.11.107 ↗
14. Lentz M, Nissen J, Fahrenson C, Vogel SC, Reimers W (2016) Macro- and microstructure evolution of an extruded Mg-Mn-Ce alloy during annealing. Mater Sci Eng A 655:17–2610.1016/j.msea.2015.12.060 ↗
15. Celikin M, Kaya AA, Gauvin R, Pekguleryuz M (2012) Effects of manganese on the microstructure and dynamic precipitation in creep-resistant cast Mg-Ce-Mn alloys. Scr Mater 66:737–74010.1016/j.scriptamat.2012.01.043 ↗
16. Zhang YX, Chen T, Kuang J, Huo QH (2022) Relationship between work hardening capacity and compressive creep behavior in a hot-extruded Mg-6Al-1Zn alloy rod. Metall Mater Trans A 53:747–75310.1007/s11661-021-06578-x ↗
17. Milička K, Dobeš F, Pérez P, Garcés G, Adeva P (2009) Anisotropy of creep resistance in extruded magnesium. Scr Mater 61:1109–111210.1016/j.scriptamat.2009.08.033 ↗
18. Kleiner S, Uggowitzer PJ (2004) Mechanical anisotropy of extruded Mg-6% Al-1% Zn alloy. Mater Sci Eng A 379:258–26310.1016/j.msea.2004.02.020 ↗
19. Chino Y, Kimura K, Hakamada M, Mabuchi M (2008) Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy. Mater Sci Eng A 485:311–31710.1016/j.msea.2007.07.076 ↗
20. Zhang YX, Xiao ZY, Huo QH, Luo L, Li KY, Hashimoto A, Yang XY (2019) Effects of initial texture on the three-dimensional creep anisotropic behaviors of dilute Mg-Y binary alloy sheets. Mater Sci Eng A 766:13833610.1016/j.msea.2019.138336 ↗
21. Blum W, Eisenlohr P (2009) Dislocation mechanics of creep. Mater Sci Eng A 510–511:7–1310.1016/j.msea.2008.04.110 ↗
22. Mordike BL (2002) Creep-resistant magnesium alloys. Mater Sci Eng A 324:103–11210.1016/S0921-5093(01)01290-4 ↗
23. Nan XL, Wang HY, Zhang L, Li JB, Jiang QC (2012) Calculation of schmid factors in magnesium: analysis of deformation behaviors. Scr Mater 67:443–44610.1016/j.scriptamat.2012.05.042 ↗
24. Suzuki M, Sato H, Maruyama K, Oikawa H (2001) Creep deformation behavior and dislocation substructures of Mg-Y binary alloys. Mater Sci Eng A 319–321:75–755
25. Sandlöbes S, Friák M, Korte-Kerzel S, Pei Z, Neugebauer J, Raabe D (2017) A rare-earth free magnesium alloy with improved intrinsic ductility. Sci Rep 7:1045810.1038/s41598-017-10384-0 ↗
26. Ding ZG, Liu W, Sun H, Li S, Zhang DL, Zhao YH, Lavernia EJ, Zhu YT (2018) Origins and dissociation of pyramidal dislocations in magnesium and its alloys. Acta Mater 146:265–27210.1016/j.actamat.2017.12.049 ↗
27. Yu ZJ, Huang YD, Dieringa H, Mendis CL, Guan RG, Hort N, Meng J (2015) High temperature mechanical behavior of an extruded Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy. Mater Sci Eng A 645:213–22410.1016/j.msea.2015.08.001 ↗
28. Celikin M, Gauvin R, Pekguleryuz M (2018) Dynamic co-precipitation of α-Mn/Mg12Ce in creep resistant Mg-Sr-Mn-Ce alloys. Mater Sci Eng A 719:199–20510.1016/j.msea.2018.02.041 ↗
29. Zhang YX, Huo QH, Zhang ZR, Wang CY, Nagaumi H, Yang XY (2022) Dependence of compressive creep behavior on the loading direction of an extruded Mg sheet with an extremely dilute yttrium addition. Mater Sci Eng A 839:14289410.1016/j.msea.2022.142894 ↗
30. Zhang YX, Xiao ZY, Huo QH, Zhang ZR, Tang J, Hashimoto A, Yang XY (2020) Effects of pre-compression on the three-dimensional creep anisotropy of a hot-rolled Mg-4wt%Y binary alloy sheet. Mater Sci Eng A 772:13884310.1016/j.msea.2019.138843 ↗
31. Stratford DJ, Beckley L (1972) Precipitation process in Mg-Th, Mg-Th-Mn, Mg-Mn, and Mg-Zr alloys. Met Sci J 6:83–8910.1179/030634572790446127 ↗
32. Skjerpe PM, Simensen CJ (1983) Precipitation in Mg-Mn alloys. J Met Sci 17:403–40710.1179/030634583790420682 ↗
33. Zhang Z, Zhang JH, Xie JS, Liu SJ, He YY, Guan K, Wu RZ (2022) Developing a low-alloyed fine-grained Mg alloy with high strength-ductility based on dislocation evolution and grain boundary segregation. Scr Mater 209:11441410.1016/j.scriptamat.2021.114414 ↗
34. Somekawa H, Basha DA, Singh A (2019) Role of grain boundaries on ductility in Mg-Y alloys. Materialia 8:10046610.1016/j.mtla.2019.100466 ↗
35. Xiao LR, Chen XF, Cao Y, Zhou H, Ma XL, Yin DD, Ye B, Han XD, Zhu YT (2020) Solute segregation assisted nanocrystallization of a cold-rolled Mg-Ag alloy during annealing. Scr Mater 177:69–7310.1016/j.scriptamat.2019.10.012 ↗
36. Zeng ZR, Zhu YM, Xu SW, Bian MZ, Davies CHJ, Birbilis N, Nie JF (2016) Texture evolution during static recrystallization of cold-rolled magnesium alloys. Acta Mater 105:479–49410.1016/j.actamat.2015.12.045 ↗
37. Hadorn JP, Sasaki TT, Nakata T, Ohkubo T, Kamado S, Hono K (2014) Solute clustering and grain boundary segregation in extruded dilute Mg-Gd alloys. Scr Mater 93:28–3110.1016/j.scriptamat.2014.08.022 ↗
38. Lee JW, Kim DJ, Hong HU (2015) A new approach to strengthen grain boundaries for creep improvement of a Ni-Cr-Co-Mo superalloy at 950 °C. Mater Sci Eng A 625:164–16810.1016/j.msea.2014.12.010 ↗
39. Zhang ZR, Huo QH, Zhang YX, Xiao ZY, Hashimoto A, Yang XY (2021) Impacts of artificial aging state on the creep resistance of a rolled Mg-3.5Nd alloy. Mater Sci Eng A 819:14149110.1016/j.msea.2021.141491 ↗
40. Yi S-B, Davies CHJ, Brokmeier H-G, Bolmaro RE, Kainer KU, Homeyer J (2006) Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading. Acta Mater 64:549–56210.1016/j.actamat.2005.09.024 ↗