The role of corrosion product layers in the pitting resistance of powder-processed Al–Cr–Co–Mn–Zr alloys containing icosahedral quasicrystalline dispersoids
Source abstract
Abstract
The impact of the surface corrosion product layers on the pitting corrosion behavior of three Al–Cr–Mn–Co–Zr alloys has been studied using a combination of electron microscopy, X-ray and electrochemical techniques. These alloys contain an FCC Al matrix, different volume fractions of icosahedral quasicrystalline (I-phase) dispersoids and minority grain boundary phases. The I-phase dispersoids act as cathodic sites, and alloys with higher I-phase volume fractions have lower open circuit potentials and higher corrosion current densities before salt fog exposure. Upon ASTM salt fog exposure for 6 weeks, these trends reverse due to the development of a corrosion product bilayer. The bilayer consists of a dense outer layer with angular crystallites of bayerite, and an inner boehmite layer with a fibrillar morphology and a gradient structure with the highest density at the interface with the alloy. This bilayer was more well developed at higher I-phase volume fractions and after upset forging. The layer was found to improve the resistance of the alloys to pitting corrosion, with the pitting potentials increasing dramatically to values as high as 1432 mV (with respect to saturated calomel electrode) after the salt fog exposure. These values were significantly higher than those for the conventional high-strength Al alloys Al 6061 (− 126 mV) and Al 7075 (− 706 mV) tested under identical conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Shechtman D, Blech I, Gratias D, Cahn JW (1984) Metallic phase with long-range orientational order and no translational symmetry. Phys Rev Lett 53:1951–1953. https://doi.org/10.1103/PhysRevLett.53.195110.1103/PhysRevLett.53.1951 ↗
2. Levine D, Steinhardt PJ (1986) Quasicrystals. I definition and structure. Phys Rev B 34:596–616. https://doi.org/10.1103/PhysRevB.34.59610.1103/PhysRevB.34.596 ↗
3. Yavas B, Hung CJ, Nayak SK et al (2023) Quasicrystal stability in complex aluminum alloys: insights from first principles models on structural motifs in crystalline approximants. Scr Mater 222:115046. https://doi.org/10.1016/j.scriptamat.2022.11504610.1016/j.scriptamat.2022.115046 ↗
4. Urban K, Feuerbacher M, Wollgarten M (1997) Mechanical behavior of quasicrystals. MRS Bull 22:65–68. https://doi.org/10.1557/S088376940003446110.1557/S0883769400034461 ↗
5. Dubois J-M (2000) New prospects from potential applications of quasicrystalline materials. Mater Sci Eng A 294–296:4–9. https://doi.org/10.1016/S0921-5093(00)01305-810.1016/S0921-5093(00)01305-8 ↗
6. Kang SS, Dubois J-M, von Stebut J (1993) Tribological properties of quasicrystalline coatings. J Mater Res 8:2471–2481. https://doi.org/10.1557/JMR.1993.247110.1557/JMR.1993.2471 ↗
7. Dubois J-MM (2012) Properties and applications of quasicrystals and complex metallic alloys. Chem Soc Rev 41:6760–6777. https://doi.org/10.1039/C2CS35110B10.1039/C2CS35110B ↗
8. Amini M, Rahimipour MR, Tayebifard SA et al (2022) Towards physical and mechanical properties of the novel Al–Cr–Ni–Fe decagonal quasicrystal and crystalline approximants. Adv Powder Technol 33:103383. https://doi.org/10.1016/j.apt.2021.12.00210.1016/j.apt.2021.12.002 ↗
9. Rivier N (1993) Non-stick quasicrystalline coatings. J Non Cryst Solids 153–154:458–462. https://doi.org/10.1016/0022-3093(93)90395-E10.1016/0022-3093(93)90395-E ↗
10. Khun NW, Li RT, Loke K, Khor KA (2015) Effects of Al–Cr–Fe quasicrystal content on tribological properties of cold-sprayed titanium composite coatings. Tribol Trans 58:616–624. https://doi.org/10.1080/10402004.2014.99186010.1080/10402004.2014.991860 ↗
11. Dubois J-M, Kang SS, Massiani Y (1993) Application of quasicrystalline alloys to surface coating of soft metals. J Non Cryst Solids 153–154:443–445. https://doi.org/10.1016/0022-3093(93)90392-B10.1016/0022-3093(93)90392-B ↗
12. Wolf W, Koga GY, Schulz R et al (2020) Wear and corrosion performance of Al–Cu–Fe–(Cr) quasicrystalline coatings produced by HVOF. J Therm Spray Technol 29:1195–1207. https://doi.org/10.1007/s11666-020-01053-210.1007/s11666-020-01053-2 ↗
13. Wolf W, Bolfarini C, Kiminami CS, Botta WJ (2021) Recent developments on fabrication of Al-matrix composites reinforced with quasicrystals: from metastable to conventional processing. J Mater Res 36:281–297. https://doi.org/10.1557/S43578-020-00083-410.1557/S43578-020-00083-4 ↗
14. Naglič I, Samardžija Z, Delijić K et al (2018) Synthesis of an Al–Mn–based alloy containing in situ-formed quasicrystals and evaluation of its mechanical and corrosion properties. JOM 70:2698–2703. https://doi.org/10.1007/S11837-018-2945-610.1007/S11837-018-2945-6 ↗
15. Lee S, Jung J, Fleury E et al (2000) Metal matrix composites reinforced by gas-atomised Al–Cu–Fe powders. Mater Sci Eng A 294–296:99–103. https://doi.org/10.1016/S0921-5093(00)01223-510.1016/S0921-5093(00)01223-5 ↗
16. Inoue A (1998) Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems. Prog Mater Sci 43:365–520. https://doi.org/10.1016/S0079-6425(98)00005-X10.1016/S0079-6425(98)00005-X ↗
17. Inoue A, Kimura H (2000) High-strength aluminum alloys containing nanoquasicrystalline particles. Mater Sci Eng A 286:1–10. https://doi.org/10.1016/S0921-5093(00)00656-010.1016/S0921-5093(00)00656-0 ↗
18. Tang F, Anderson IE, Biner SB (2003) Microstructures and mechanical properties of pure Al matrix composites reinforced by Al-Cu-Fe alloy particles. Mater Sci Eng A 363:20–29. https://doi.org/10.1016/S0921-5093(03)00433-710.1016/S0921-5093(03)00433-7 ↗
19. Xu DK, Zu TT, Yin M et al (2014) Mechanical properties of the icosahedral phase reinforced duplex Mg–Li alloy both at room and elevated temperatures. J Alloys Compd 582:161–166. https://doi.org/10.1016/J.JALLCOM.2013.08.02010.1016/J.JALLCOM.2013.08.020 ↗
20. Xu DK, Liu L, Xu YB, Han EH (2007) The strengthening effect of icosahedral phase on as-extruded Mg–Li alloys. Scr Mater 57:285–288. https://doi.org/10.1016/J.SCRIPTAMAT.2007.03.01710.1016/J.SCRIPTAMAT.2007.03.017 ↗
21. Samal P, Vundavilli PR, Meher A, Mahapatra MM (2020) Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties. J Manuf Process 59:131–152. https://doi.org/10.1016/J.JMAPRO.2020.09.01010.1016/J.JMAPRO.2020.09.010 ↗
22. Bobić B, Mitrović S, Babić M et al (2010) Corrosion of metal-matrix composites with aluminium alloy substrate. Tribol Ind 32(1):3
23. Schurack F, Eckert J, Schultz L (2000) Quasicrystalline Al-alloys with high strength and good ductility. Mater Sci Eng A 294:164–167. https://doi.org/10.1016/S0921-5093(00)01191-610.1016/S0921-5093(00)01191-6 ↗
24. Galano M, Audebert F, Stone IC, Cantor B (2009) Nanoquasicrystalline Al–Fe–Cr-based alloys. Part I: phase transformations. Acta Mater 57:5107–5119. https://doi.org/10.1016/j.actamat.2009.07.01110.1016/j.actamat.2009.07.011 ↗
25. Galano M, Audebert F, Escorial AG et al (2009) Nanoquasicrystalline Al–Fe–Cr-based alloys. Part II. Mechanical properties. Acta Mater 57:5120–5130. https://doi.org/10.1016/j.actamat.2009.07.00910.1016/j.actamat.2009.07.009 ↗
26. Silveira AD, Silva LPMe, Oliveira TCD et al (2022) Al-matrix composites reinforced with quasicrystals consolidated at room temperature using HPT. Mater Lett 317:132107. https://doi.org/10.1016/j.matlet.2022.13210710.1016/j.matlet.2022.132107 ↗
27. McCafferty E (2003) Sequence of steps in the pitting of aluminum by chloride ions. Corros Sci 45:1421–1438. https://doi.org/10.1016/S0010-938X(02)00231-710.1016/S0010-938X(02)00231-7 ↗
28. Szklarska-Smialowska Z (1999) Pitting corrosion of aluminum. Corros Sci 41:1743–1767. https://doi.org/10.1016/S0010-938X(99)00012-810.1016/S0010-938X(99)00012-8 ↗
29. Frankel GS (1998) Pitting corrosion of metals. J Electrochem Soc 145:2186. https://doi.org/10.1149/1.183861510.1149/1.1838615 ↗
30. Frankel GS, Sridhar N (2008) Understanding localized corrosion. Mater Today 11:38–44. https://doi.org/10.1016/S1369-7021(08)70206-210.1016/S1369-7021(08)70206-2 ↗
31. Natishan PM, O’Grady WE (2014) Chloride ion interactions with oxide-covered aluminum leading to pitting corrosion: a review. J Electrochem Soc 161:C421–C432. https://doi.org/10.1149/2.1011409JES10.1149/2.1011409JES ↗
32. Galvele JR (1976) Transport processes and the mechanism of pitting of metals. J Electrochem Soc 123:464–474. https://doi.org/10.1149/1.213285710.1149/1.2132857 ↗
33. Galvele JR (1981) Transport processes in passivity breakdown-II. Full hydrolysis of the metal ions. Corros Sci 21:551–579. https://doi.org/10.1016/0010-938X(81)90009-310.1016/0010-938X(81)90009-3 ↗
34. Soltis J (2015) Passivity breakdown, pit initiation and propagation of pits in metallic materials: review. Corros Sci 90:5–22. https://doi.org/10.1016/J.CORSCI.2014.10.00610.1016/J.CORSCI.2014.10.006 ↗
35. Rüdiger A, Köster U (2000) Corrosion behavior of Al–Cu–Fe quasicrystals. Mater Sci Eng A 294–296:890–893. https://doi.org/10.1016/S0921-5093(00)01037-610.1016/S0921-5093(00)01037-6 ↗
36. Huttunen-Saarivirta E, Tiainen T (2004) Corrosion behaviour of Al–Cu–Fe alloys containing a quasicrystalline phase. Mater Chem Phys 85:383–395. https://doi.org/10.1016/J.MATCHEMPHYS.2004.01.02510.1016/J.MATCHEMPHYS.2004.01.025 ↗
37. Massiani Y, Ait Yaazza S, Crousier JP, Dubois JM (1993) Electrochemical behaviour of quasicrystalline alloys in corrosive solutions. J Non Cryst Solids 159:92–100. https://doi.org/10.1016/0022-3093(93)91286-C10.1016/0022-3093(93)91286-C ↗
38. Huttunen-Saarivirta E (2004) Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: a review. J Alloys Compd 363:154–178. https://doi.org/10.1016/S0925-8388(03)00445-610.1016/S0925-8388(03)00445-6 ↗
39. Duriska L, Cernickova I, Priputen P, Palcut M (2021) Aqueous corrosion of aluminum-transition metal alloys composed of structurally complex phases: a review. Mater 14:5418. https://doi.org/10.3390/ma1418541810.3390/ma14185418 ↗
40. Shi F, Yu Y, Guo X et al (2009) Corrosion behavior of as-cast Mg68Zn28Y4 alloy with I-phase. Trans Nonferrous Met Soc China 19:1093–1097. https://doi.org/10.1016/S1003-6326(08)60412-410.1016/S1003-6326(08)60412-4 ↗
41. Chugunov DB, Klyuchagina AN, Meshkov LL, Osipov AK (2018) The effect of doping on the corrosion behavior of quasi-crystalline alloys in the Al–Cu–Fe–Cr system. Prot Met Phys Chem Surf 54:301–307. https://doi.org/10.1134/S207020511802004110.1134/S2070205118020041 ↗
42. Li RT, Murugan VK, Dong ZL, Khor KA (2016) Comparative study on the corrosion resistance of Al–Cr–Fe alloy containing quasicrystals and pure Al. J Mater Sci Technol 32:1054–1058. https://doi.org/10.1016/J.JMST.2016.07.00510.1016/J.JMST.2016.07.005 ↗
43. Lee K, Chen E, Naugle D, Liang H (2021) Corrosive behavior of multi-phased quasicrystal alloys. J Alloys Compd 851:156862. https://doi.org/10.1016/J.JALLCOM.2020.15686210.1016/J.JALLCOM.2020.156862 ↗
44. Babilas R, Młynarek K, Łoński W et al (2021) Analysis of thermodynamic parameters for designing quasicrystalline Al–Ni–Fe alloys with enhanced corrosion resistance. J Alloys Compd 868:159241. https://doi.org/10.1016/J.JALLCOM.2021.15924110.1016/J.JALLCOM.2021.159241 ↗
45. Hamdy AS, Alfosail F, Gasem Z (2013) Electrochemical behavior of a discontinuously A6092/SiC/17.5p metal matrix composite in chloride containing solution. Electrochim Acta 88:129–134. https://doi.org/10.1016/j.electacta.2012.10.07910.1016/j.electacta.2012.10.079 ↗
46. Hihara LH, Latanision RM (1994) Corrosion of metal matrix composites. Int Mater Rev 39:245–264. https://doi.org/10.1179/imr.1994.39.6.24510.1179/imr.1994.39.6.245 ↗
47. Trzaskoma PP, McCafferty E, Crowe CR (1983) Corrosion behavior of SiC/Al metal matrix composites. J Electrochem Soc 130:1804. https://doi.org/10.1149/1.212010210.1149/1.2120102 ↗
48. Winkler SL, Ryan MP, Flower HM (2004) Pitting corrosion in cast 7XXX aluminium alloys and fibre reinforced MMCs. Corros Sci 46:893–902. https://doi.org/10.1016/j.corsci.2003.09.00310.1016/j.corsci.2003.09.003 ↗
49. Albiter A, Contreras A, Salazar M, Gonzalez-Rodriguez JG (2006) Corrosion behaviour of aluminium metal matrix composites reinforced with TiC processed by pressureless melt infiltration. J Appl Electrochem 36:303–308. https://doi.org/10.1007/s10800-005-9073-z10.1007/s10800-005-9073-z ↗
50. Pashange S, Alizadeh M, Amini R (2021) Structural and corrosion behavior investigation of novel nano-quasicrystalline Al–Cr–Fe reinforced Al-matrix composites produced by ARB process. J Alloys Compd 890:161774. https://doi.org/10.1016/j.jallcom.2021.16177410.1016/j.jallcom.2021.161774 ↗
51. Watson TJ, Gordillo MA, Cernatescu I, Aindow M (2016) Structure and mechanical properties in a powder-processed icosahedral-phase-strengthened aluminum alloy. Scr Mater 123:51–54. https://doi.org/10.1016/J.SCRIPTAMAT.2016.05.03710.1016/J.SCRIPTAMAT.2016.05.037 ↗
52. Watson TJ, Gordillo MA, Ernst AT et al (2017) Salt fog corrosion behavior in a powder-processed icosahedral-phase-strengthened aluminum alloy. Corros Sci 121:133–138. https://doi.org/10.1016/J.CORSCI.2017.03.01010.1016/J.CORSCI.2017.03.010 ↗
53. Watson TJ, Nardi A, Ernst AT et al (2017) Cold spray deposition of an icosahedral-phase-strengthened aluminum alloy coating. Surf Coat Technol 324:57–63. https://doi.org/10.1016/J.SURFCOAT.2017.05.04910.1016/J.SURFCOAT.2017.05.049 ↗
54. Leonard HR, Rommel S, Watson TJ et al (2019) Development of quasicrystal morphology in gas-atomized icosahedral-phase-strengthened aluminum alloy powders. Mater Des 182:108094. https://doi.org/10.1016/J.MATDES.2019.10809410.1016/J.MATDES.2019.108094 ↗
55. Leonard HR, Rommel S, Li MX et al (2020) Microstructure/mechanical behavior relationships in upset-forged powder-processed Al alloys containing icosahedral quasicrystalline dispersoids. Mater Sci Eng A 788:139487. https://doi.org/10.1016/J.MSEA.2020.13948710.1016/J.MSEA.2020.139487 ↗
56. Leonard HR, Rommel S, Li MX et al (2021) Thermal stability of quasicrystals in an icosahedral-phase-strengthened aluminum alloy. Mater Charact 181:111490. https://doi.org/10.1016/J.MATCHAR.2021.11149010.1016/J.MATCHAR.2021.111490 ↗
57. Leonard HR, Rommel S, Li MX et al (2021) Precipitation phenomena in a powder-processed quasicrystal-reinforced Al–Cr–Mn–Co–Zr alloy. Mater Charact 178:111239. https://doi.org/10.1016/j.matchar.2021.11123910.1016/j.matchar.2021.111239 ↗
58. Rommel S, Leonard HR, Watson TJ et al (2020) Corrosion phenomena in a powder-processed Al alloy containing icosahedral quasicrystalline dispersoids. Corros Sci 177:108970. https://doi.org/10.1016/J.CORSCI.2020.10897010.1016/J.CORSCI.2020.108970 ↗
59. Li MX, Leonard HR, Rommel S et al (2022) Use of laser glazing to evaluate an Al–Cr–Co–Mn–Zr alloy containing icosahedral quasicrystalline dispersoids as a candidate material for additive manufacturing. Addit Manuf 59:103114. https://doi.org/10.1016/j.addma.2022.10311410.1016/j.addma.2022.103114 ↗
60. ASTM B117-11 (2011) Standard practice for operating salt spray (fog) apparatus, ASTM International
61. Jones D (1992) Principles and prevention of corrosion (2nd edn), Section 3.4.2 “anodic polarization”. Macmillan Publishing Company(USA), vol 568, pp 96–98
62. Alwitt RS (1974) The growth of hydrous oxide films on aluminum. J Electrochem Soc 121:1322–1328. https://doi.org/10.1149/1.240167910.1149/1.2401679 ↗
63. Vedder W, Vermilyea DA (1969) Aluminum + water reaction. Trans Faraday Soc 65:561–584. https://doi.org/10.1039/TF969650056110.1039/TF9696500561 ↗
64. Hart RK (1957) The formation of films on aluminium immersed in water. Trans Faraday Soc 53:1020–1027. https://doi.org/10.1039/tf957530102010.1039/tf9575301020 ↗
65. Gorman JD, Hughes AE, Jamieson D, Paterson PKJ (2003) Oxide formation on aluminium alloys in boiling deionised water and NaCl, CeCl3 and CrCl3 solutions. Corros Sci 45:1103–1124. https://doi.org/10.1016/S0010-938X(02)00209-310.1016/S0010-938X(02)00209-3 ↗
66. Din RU, Gudla VC, Jellesen MS, Ambat R (2015) Accelerated growth of oxide film on aluminium alloys under steam: part I: effects of alloy chemistry and steam vapour pressure on microstructure. Surf Coat Technol 276:77–88. https://doi.org/10.1016/j.surfcoat.2015.06.05910.1016/j.surfcoat.2015.06.059 ↗
67. Huang IW, Hurley BL, Yang F, Buchheit RG (2016) Dependence on temperature, pH, and Cl− in the uniform corrosion of aluminum alloys 2024-T3, 6061-T6, and 7075-T6. Electrochim Acta 199:242–253. https://doi.org/10.1016/J.ELECTACTA.2016.03.12510.1016/J.ELECTACTA.2016.03.125 ↗