Motion behavior and removal mechanism of inclusions during negative pressure continuous casting process
Source abstract
Abstract
The control and removal of inclusions in the continuous casting process can significantly improve the performance of casting billet. In this paper, the aluminum alloy rod billets were prepared by the self-developed negative pressure continuous casting (NPCC) technique. The three-dimensional (3D) morphology and distribution of inclusions in the rod billet were analyzed by X-ray microtomography, the inclusions motion behavior was systematically studied by numerical simulation, and the inclusions removal mechanism was comprehensively revealed. The results show the volume fraction of inclusions in the aluminum alloy rod billet prepared by NPCC technique is 0.03%. Compared with the traditional vertical downward continuous casting (VDCC) technique, the inclusions are reduced by 81.3% and the maximum equivalent diameter is reduced from 24 to 13 μm. By changing the pressure difference inside and outside the melt (PDIOM), NPCC technique makes the melt and inclusions flow in the same direction, which accelerates the floating of inclusions to the melt surface to achieve dynamic solid–liquid separation. Simultaneously, the PDIOM increases the turbulent kinetic energy dissipation rate of melt by a maximum of 44.3 times, and the collision constant of inclusion particles increases by a maximum of 6.7 times. The inclusion particles are more likely to collision and aggregation, which is conducive to the floating and removal of inclusions, thereby further reducing the content and size of inclusions in the rod billet. Overall, this study provides a new continuous casting technique for the preparation of high-quality metal billet with low inclusions content and size.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Shannon G, White L, Sridhar S (2008) Modeling inclusion approach to the steel/slag interface. Mat Sci Eng A 495:310–31510.1016/j.msea.2007.09.087 ↗
2. Wang F, Fan ZY (2019) Characterization of AlN inclusion particles formed in commercial purity aluminum. Metall Mater Trans A 50:2519–252610.1007/s11661-019-05150-y ↗
3. Rajput A, Paul SK (2021) Effect of soft and hard inclusions in tensile deformation and damage mechanism of aluminum: a molecular dynamics study. J Alloy Compd 869:15921310.1016/j.jallcom.2021.159213 ↗
4. Zheng LC, Malfliet A, Wollants P, Blanpain B, Guo MX (2016) Effect of alumina morphology on the clustering of alumina inclusions in molten iron. ISIJ Int 56:926–93510.2355/isijinternational.ISIJINT-2015-561 ↗
5. Seleznev M, Henschel S, Storti E, Aneziris CG, Krüger L, Weidner A, Biermann H (2020) Effect of filter functional coating on detrimental nonmetallic inclusions in 42CrMo4 steel and its resulting mechanical properties. Adv Eng Mat 22:190054010.1002/adem.201900540 ↗
6. Li LY, Cheng GG, Hu B, Wang CS, Qian G (2018) Formation of non-metallic inclusions of Si-killed stainless steel during GOR refining process. High Temp Mat Process 37:521–52910.1515/htmp-2016-0188 ↗
7. Emi T (1975) Origin and removal of large non-metallic inclusions in steel[J]. Scand J Metall 4:1–8
8. Li H, Zhao D, Zhu G, Bao CL, Yang J (2015) Influence of inclusions on impact properties of J55 steel. J Iron Steel Res Int 22:36–4110.1016/S1006-706X(15)30135-7 ↗
9. Zheng L, Zhang GQ, Gorley MJ, Lee TL, Li Z, Xiao CB, Tang CC (2021) Effects of vacuum on gas content, oxide inclusions and mechanical properties of Ni-based superalloy using electron beam button and synchrotron diffraction. Mater Des 207:10986110.1016/j.matdes.2021.109861 ↗
10. Yuan DW, Chen JS, Xiao XP, Han BJ, Huang H, Liu BX, Yang B (2021) Microstructure and properties of Cu-Fe-Cr-Ag alloy prepared by directional solidification and upward continuous casting. Metall Mater Trans A 52:2489–250010.1007/s11661-021-06239-z ↗
11. You BS, Yim CD, Kim SH (2005) Solidification of AZ31 magnesium alloy plate in a horizontal continuous casting process. Mat Sci Eng A 413:139–14310.1016/j.msea.2005.08.183 ↗
12. Zhang LW, Wang ZL, Xu CJ, Li SL, Ai XG, Li Z (2019) A vertical continuous casting machine for large blooms. Iron Steel 46(08):742–74610.1080/03019233.2017.1408244 ↗
13. Zhang L, Taniguchi S (2000) Fundamentals of inclusion removal from liquid steel by bubble flotation. Int Mat Rev 45:59–8210.1179/095066000101528313 ↗
14. Nguyen AV, An-Vo D, Tran-Cong T, Evans GM (2016) A review of stochastic description of the turbulence effect on bubble-particle interactions in flotation. Int J Miner Process 156:75–8610.1016/j.minpro.2016.05.002 ↗
15. Meng J, Tabosa E, Xie WG, Runge K, Bradshaw D, Manlapig E (2016) A review of turbulence measurement techniques for flotation. Miner Eng 95:79–9510.1016/j.mineng.2016.06.007 ↗
16. Duan HJ, Ren Y, Zhang LF (2019) Inclusion capture probability prediction model for bubble floatation in turbulent steel flow. Metall Mater Trans B 50:16–2110.1007/s11663-018-1462-x ↗
17. Chang S, Zou ZS, Liu JH, Isac M, Cao XE, Su XF, Guthrie RIL (2021) Study on the slag-metal interfacial behavior under the impact of bubbles in different sizes. Powder Technol 387:125–13510.1016/j.powtec.2021.04.018 ↗
18. He YJ, Li QL, Liu W (2011) Effect of combined magnetic field on the eliminating inclusions from liquid aluminum alloy. Mat Lett 65:1226–122810.1016/j.matlet.2011.01.061 ↗
19. Jiang DC, Qin SQ, Li PT, Shi S, Wen ST, Tan Y (2017) Electromagnetic separation of silicon carbide inclusions with aluminum penetration in silicon by imposition of supersonic frequency magnetic field. J Clean Product 145:45–4910.1016/j.jclepro.2017.01.041 ↗
20. Reza AM, Reza AM, Guthrie RIL, Isac M (2010) Modeling of electromagnetic separation of inclusions from molten metals. Int J Mech Sci 52:1107–111410.1016/j.ijmecsci.2009.11.003 ↗
21. Wang SQ, Zhang LF, Tian Y, Li YL, Ling H (2014) Separation of non-metallic inclusions from molten steel using high frequency electromagnetic fields. Metall Mater Trans B 45:1915–193510.1007/s11663-014-0107-y ↗
22. Ren YS, Ma WH, Wei KX, Yu WZ, Dai YN, Morita K (2014) Degassing of aluminum alloys via the electromagnetic directional solidification. Vacuum 109:82–8510.1016/j.vacuum.2014.06.026 ↗
23. Duan HJ, Ren Y, Zhang LF (2019) Modeling of turbulent flow around bubbles in molten steel. Steel Res Int 90:180057610.1002/srin.201800576 ↗
24. Xu ZM, Li TX, Zhou YH (2007) Continuous removal of nonmetallic inclusions from aluminum melts by means of stationary electromagnetic field and DC current. Metall Mater Trans A 38:1104–111010.1007/s11661-007-9149-y ↗
25. Liu XF, Liao WN, Sun JH (2018). Negative pressure continuous casting device and method. CN108817339A.
26. Romero JS, Cruchaga MA, Celentano DJ (2013) Evaluation of formation and evolution of microporosity in anodic copper solidification processes: Simulation and experimental validation. Metall Mater Trans B 44:624–65210.1007/s11663-013-9815-y ↗
27. Liu XF, Liao WN, Yang YH (2020) Thermal characteristics and uniformity of microstructures during temperature controlled mold continuous casting profiled copper alloy strip. Int Commun Heat Mass Transf 110:10441410.1016/j.icheatmasstransfer.2019.104414 ↗
28. Yang YH, Liu XF, Wang SQ (2020) Thermal characteristics of induction heating with stepped diameter mold during two-phase zone continuous casting high-strength aluminum alloys. Int Commun Heat Mass Transf 152:11947910.1016/j.ijheatmasstransfer.2020.119479 ↗
29. Buliński P, Smolka J, Siwiec G et al (2019) Numerical examination of the evaporation process within a vacuum induction furnace with a comparison to experimental results. Appl Therm Eng 150:348–35810.1016/j.applthermaleng.2019.01.008 ↗
30. Yang YH, Chen RR, Guo JJ, Ding HS, Su YQ (2018) Numerical analysis for electromagnetic field influence on heat transfer behaviors in cold crucible used for directional solidification. Int Commun Heat Mass Transf 122:1128–113710.1016/j.ijheatmasstransfer.2018.02.067 ↗
31. Ebrahimi M, Crapper M (2017) CFD-DEM simulation of turbulence modulation in horizontal pneumatic conveying. Particuology 31:15–2410.1016/j.partic.2016.05.012 ↗
32. Geng SN, Yang W, Jiang P, Han C, Ren LY (2022) Numerical study of keyhole dynamics and porosity formation during high-power oscillating laser welding of medium-thick aluminum alloy plates. Int J Heat Mass Transf 194:12308410.1016/j.ijheatmasstransfer.2022.123084 ↗
33. Chattopadhyay K, Isac M, Guthrie RIL (2011) Considerations in using the discrete phase model (DPM). Steel Res Int 82:1287–128910.1002/srin.201000214 ↗
34. Joachim H, Manfred Z, Andreas A, Werner O (2005) Optimization of the tundish design to increase the product quality by means of numerical fluid dynamics. Steel Res Int 76:59–6310.1002/srin.200505973 ↗
35. Chen C, Ni PY, Jonsson LTI, Tilliander A, Cheng GG, Jönsson PG (2016) A model study of inclusions deposition, macroscopic transport, and dynamic removal at steel-slag interface for different tundish designs. Metall Mater Trans B 47:1916–193210.1007/s11663-016-0637-6 ↗
36. Choi JI, Park Y, Kwon O, Lee C (2016) Interparticle collision mechanism in turbulence. Phys Rev E 93:1311210.1103/PhysRevE.93.013112 ↗
37. Picardo JR, Agasthya L, Govindarajan R, Ray SS (2019) Flow structures govern particle collisions in turbulence. Phys Rev Fluid 4:3260110.1103/PhysRevFluids.4.032601 ↗
38. Kruis FE, Kusters KA (1997) The collision rate of particles in turbulent flow. Chem Eng Commun 158:201–23010.1080/00986449708936589 ↗
39. Lindborg U, Torssell K (1968) A collision model for the growth and separation of deoxidation products. Trans Metall Soc 242:94–109
40. Cai H, Sun CC, Miao GQ (2021) The Bernoulli effect in horizontal granular flows. Soft Matter 17:1839–184510.1039/D1SM01398J ↗
41. Qin RQ, Duan CY (2017) The principle and applications of Bernoulli equation. J Phys Conf Ser 916:1203810.1088/1742-6596/916/1/012038 ↗
42. Chen SY, Chen XH, Wan DD, Sun X, Ji L, Wu K, Wang GC (2020) Particle-resolved direct numerical simulation of collisions of bidisperse inertial particles in a homogeneous isotropic turbulence. Powder Technol 376:72–7910.1016/j.powtec.2020.08.023 ↗